Automotive 3D Printing Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2028
Market Overview:
The global automotive 3D printing market size reached US$ 2.6 Billion in 2022. Looking forward, IMARC Group expects the market to reach US$ 8.5 Billion by 2028, exhibiting a growth rate (CAGR) of 20.7% during 2023-2028.
Three-dimensional (3D) printing refers to automated additive manufacturing technology that assists in creating rapid prototypes for fabricating layer-by-layer materials to design patterns, physical models, and tooling components. It aids in creating various lightweight intricate geometric pieces, including internal channels and wire mesh, reducing prototyping cost and manufacturing complex parts, while ensuring minimal wastage of materials. On account of these properties, 3D printing is extensively used in the automotive sector to enable automobile designers to validate prototypes, conceptualize, design and customize vehicle parts in a shorter period. At present, it is commercially available in metal, polymer and ceramics material types.
Automotive 3D Printing Market Trends:
The significant expansion in the automotive sector, along with the increasing demand for lightweight materials to enhance fuel efficiency in automobiles is primarily driving the market growth. Automotive 3D printing solution is widely adopted in the sector for manufacturing various complex parts of vehicles, while reducing lead time, which represents a key factor primarily driving the market growth. This can be attributed to the various advantages, such as reduced capital investments and high performance, associated with the deployment of automotive 3D printing systems. In line with this, the introduction of fused deposition modelling (FDM) solutions for manufacturing prototypes and concept model parts is acting as another major growth-inducing factor. The computer-aided system assists in deriving inputs from the processing unit, which further commands the model to start printing materials that are usually made from high-performance thermoplastics. Other factors, such as the emerging trend of customized automotive parts and extensive strategic collaborations amongst key players and original equipment manufacturers (OEMs) for introducing innovative automotive 3D printing systems to meet the evolving consumer needs, are creating a positive outlook for the market.
Key Market Segmentation:
IMARC Group provides an analysis of the key trends in each sub-segment of the global automotive 3D printing market report, along with forecasts at the global, regional and country level from 2023-2028. Our report has categorized the market based on component type, technology type, material type and application.
Breakup by Component Type:
Hardware
Software
Service
Breakup by Technology Type:
Selective Laser Sintering (SLS)
Stereo Lithography (SLA)
Digital Light Processing (DLP)
Electronic Beam Melting (EBM)
Selective Laser Melting (SLM)
Fused Deposition Modeling (FDM)
Breakup by Material Type:
Metal
Polymer
Ceramic
Breakup by Application:
Production
Innovation and R&D
Prototyping
Breakup by Region:
North America
United States
Canada
Asia-Pacific
China
Japan
India
South Korea
Australia
Indonesia
Others
Europe
Germany
France
United Kingdom
Italy
Spain
Russia
Others
Latin America
Brazil
Mexico
Others
Middle East and Africa
Competitive Landscape:
The competitive landscape of the industry has also been examined along with the profiles of the key players being 3D Systems Inc., 3DGence, Autodesk Inc., Desktop Metal Inc., EOS GmbH, Formlabs Inc., Hцganдs AB, Materialise NV, SLM Solutions Group AG, Stratasys Ltd., Ultimaker BV and voxeljet AG.
Key Questions Answered in This Report:
How has the global automotive 3D printing market performed so far and how will it perform in the coming years?
What has been the impact of COVID-19 on the global automotive 3D printing market?
What are the key regional markets?
What is the breakup of the market based on the component type?
What is the breakup of the market based on the technology type?
What is the breakup of the market based on the material type?
What is the breakup of the market based on the application?
What are the various stages in the value chain of the industry?
What are the key driving factors and challenges in the industry?
What is the structure of the global automotive 3D printing market and who are the key players?
What is the degree of competition in the industry?
The global automotive 3D printing market size reached US$ 2.6 Billion in 2022. Looking forward, IMARC Group expects the market to reach US$ 8.5 Billion by 2028, exhibiting a growth rate (CAGR) of 20.7% during 2023-2028.
Three-dimensional (3D) printing refers to automated additive manufacturing technology that assists in creating rapid prototypes for fabricating layer-by-layer materials to design patterns, physical models, and tooling components. It aids in creating various lightweight intricate geometric pieces, including internal channels and wire mesh, reducing prototyping cost and manufacturing complex parts, while ensuring minimal wastage of materials. On account of these properties, 3D printing is extensively used in the automotive sector to enable automobile designers to validate prototypes, conceptualize, design and customize vehicle parts in a shorter period. At present, it is commercially available in metal, polymer and ceramics material types.
Automotive 3D Printing Market Trends:
The significant expansion in the automotive sector, along with the increasing demand for lightweight materials to enhance fuel efficiency in automobiles is primarily driving the market growth. Automotive 3D printing solution is widely adopted in the sector for manufacturing various complex parts of vehicles, while reducing lead time, which represents a key factor primarily driving the market growth. This can be attributed to the various advantages, such as reduced capital investments and high performance, associated with the deployment of automotive 3D printing systems. In line with this, the introduction of fused deposition modelling (FDM) solutions for manufacturing prototypes and concept model parts is acting as another major growth-inducing factor. The computer-aided system assists in deriving inputs from the processing unit, which further commands the model to start printing materials that are usually made from high-performance thermoplastics. Other factors, such as the emerging trend of customized automotive parts and extensive strategic collaborations amongst key players and original equipment manufacturers (OEMs) for introducing innovative automotive 3D printing systems to meet the evolving consumer needs, are creating a positive outlook for the market.
Key Market Segmentation:
IMARC Group provides an analysis of the key trends in each sub-segment of the global automotive 3D printing market report, along with forecasts at the global, regional and country level from 2023-2028. Our report has categorized the market based on component type, technology type, material type and application.
Breakup by Component Type:
Hardware
Software
Service
Breakup by Technology Type:
Selective Laser Sintering (SLS)
Stereo Lithography (SLA)
Digital Light Processing (DLP)
Electronic Beam Melting (EBM)
Selective Laser Melting (SLM)
Fused Deposition Modeling (FDM)
Breakup by Material Type:
Metal
Polymer
Ceramic
Breakup by Application:
Production
Innovation and R&D
Prototyping
Breakup by Region:
North America
United States
Canada
Asia-Pacific
China
Japan
India
South Korea
Australia
Indonesia
Others
Europe
Germany
France
United Kingdom
Italy
Spain
Russia
Others
Latin America
Brazil
Mexico
Others
Middle East and Africa
Competitive Landscape:
The competitive landscape of the industry has also been examined along with the profiles of the key players being 3D Systems Inc., 3DGence, Autodesk Inc., Desktop Metal Inc., EOS GmbH, Formlabs Inc., Hцganдs AB, Materialise NV, SLM Solutions Group AG, Stratasys Ltd., Ultimaker BV and voxeljet AG.
Key Questions Answered in This Report:
How has the global automotive 3D printing market performed so far and how will it perform in the coming years?
What has been the impact of COVID-19 on the global automotive 3D printing market?
What are the key regional markets?
What is the breakup of the market based on the component type?
What is the breakup of the market based on the technology type?
What is the breakup of the market based on the material type?
What is the breakup of the market based on the application?
What are the various stages in the value chain of the industry?
What are the key driving factors and challenges in the industry?
What is the structure of the global automotive 3D printing market and who are the key players?
What is the degree of competition in the industry?
1 PREFACE
2 SCOPE AND METHODOLOGY
2.1Objectives of the Study
2.2Stakeholders
2.3Data Sources
2.3.1Primary Sources
2.3.2Secondary Sources
2.4Market Estimation
2.4.1Bottom-Up Approach
2.4.2Top-Down Approach
2.5Forecasting Methodology
3 EXECUTIVE SUMMARY
4 INTRODUCTION
4.1Overview
4.2Key Industry Trends
5 GLOBAL AUTOMOTIVE 3D PRINTING MARKET
5.1Market Overview
5.2Market Performance
5.3Impact of COVID-19
5.4Market Forecast
6 MARKET BREAKUP BY COMPONENT TYPE
6.1Hardware
6.1.1 Market Trends
6.1.2 Market Forecast
6.2Software
6.2.1 Market Trends
6.2.2 Market Forecast
6.3Service
6.3.1 Market Trends
6.3.2 Market Forecast
7 MARKET BREAKUP BY TECHNOLOGY TYPE
7.1Selective Laser Sintering (SLS)
7.1.1 Market Trends
7.1.2 Market Forecast
7.2Stereo Lithography (SLA)
7.2.1 Market Trends
7.2.2 Market Forecast
7.3Digital Light Processing (DLP)
7.3.1 Market Trends
7.3.2 Market Forecast
7.4Electronic Beam Melting (EBM)
7.4.1 Market Trends
7.4.2 Market Forecast
7.5Selective Laser Melting (SLM)
7.5.1 Market Trends
7.5.2 Market Forecast
7.6Fused Deposition Modeling (FDM)
7.6.1 Market Trends
7.6.2 Market Forecast
8 MARKET BREAKUP BY MATERIAL TYPE
8.1Metal
8.1.1 Market Trends
8.1.2 Market Forecast
8.2Polymer
8.2.1 Market Trends
8.2.2 Market Forecast
8.3Ceramic
8.3.1 Market Trends
8.3.2 Market Forecast
9 MARKET BREAKUP BY APPLICATION
9.1Production
9.1.1 Market Trends
9.1.2 Market Forecast
9.2Innovation and R&D
9.2.1 Market Trends
9.2.2 Market Forecast
9.3Prototyping
9.3.1 Market Trends
9.3.2 Market Forecast
10 MARKET BREAKUP BY REGION
10.1North America
10.1.1 United States
10.1.1.1 Market Trends
10.1.1.2 Market Forecast
10.1.2 Canada
10.1.2.1 Market Trends
10.1.2.2 Market Forecast
10.2Asia-Pacific
10.2.1 China
10.2.1.1 Market Trends
10.2.1.2 Market Forecast
10.2.2 Japan
10.2.2.1 Market Trends
10.2.2.2 Market Forecast
10.2.3 India
10.2.3.1 Market Trends
10.2.3.2 Market Forecast
10.2.4 South Korea
10.2.4.1 Market Trends
10.2.4.2 Market Forecast
10.2.5 Australia
10.2.5.1 Market Trends
10.2.5.2 Market Forecast
10.2.6 Indonesia
10.2.6.1 Market Trends
10.2.6.2 Market Forecast
10.2.7 Others
10.2.7.1 Market Trends
10.2.7.2 Market Forecast
10.3Europe
10.3.1 Germany
10.3.1.1 Market Trends
10.3.1.2 Market Forecast
10.3.2 France
10.3.2.1 Market Trends
10.3.2.2 Market Forecast
10.3.3 United Kingdom
10.3.3.1 Market Trends
10.3.3.2 Market Forecast
10.3.4 Italy
10.3.4.1 Market Trends
10.3.4.2 Market Forecast
10.3.5 Spain
10.3.5.1 Market Trends
10.3.5.2 Market Forecast
10.3.6 Russia
10.3.6.1 Market Trends
10.3.6.2 Market Forecast
10.3.7 Others
10.3.7.1 Market Trends
10.3.7.2 Market Forecast
10.4Latin America
10.4.1 Brazil
10.4.1.1 Market Trends
10.4.1.2 Market Forecast
10.4.2 Mexico
10.4.2.1 Market Trends
10.4.2.2 Market Forecast
10.4.3 Others
10.4.3.1 Market Trends
10.4.3.2 Market Forecast
10.5Middle East and Africa
10.5.1 Market Trends
10.5.2 Market Breakup by Country
10.5.3 Market Forecast
11 SWOT ANALYSIS
11.1Overview
11.2Strengths
11.3Weaknesses
11.4Opportunities
11.5Threats
12 VALUE CHAIN ANALYSIS
13 PORTERS FIVE FORCES ANALYSIS
13.1Overview
13.2Bargaining Power of Buyers
13.3Bargaining Power of Suppliers
13.4Degree of Competition
13.5Threat of New Entrants
13.6Threat of Substitutes
14 PRICE ANALYSIS
15 COMPETITIVE LANDSCAPE
15.1Market Structure
15.2Key Players
15.3Profiles of Key Players
15.3.13D Systems Inc.
15.3.1.1 Company Overview
15.3.1.2 Product Portfolio
15.3.1.3 Financials
15.3.1.4 SWOT Analysis
15.3.23DGence
15.3.2.1 Company Overview
15.3.2.2 Product Portfolio
15.3.3Autodesk Inc.
15.3.3.1 Company Overview
15.3.3.2 Product Portfolio
15.3.3.3 Financials
15.3.3.4 SWOT Analysis
15.3.4Desktop Metal Inc.
15.3.4.1 Company Overview
15.3.4.2 Product Portfolio
15.3.5EOS GmbH
15.3.5.1 Company Overview
15.3.5.2 Product Portfolio
15.3.6Formlabs Inc.
15.3.6.1 Company Overview
15.3.6.2 Product Portfolio
15.3.7Hцganдs AB
15.3.7.1 Company Overview
15.3.7.2 Product Portfolio
15.3.8Materialise NV
15.3.8.1 Company Overview
15.3.8.2 Product Portfolio
15.3.8.3 Financials
15.3.9SLM Solutions Group AG
15.3.9.1 Company Overview
15.3.9.2 Product Portfolio
15.3.9.3 Financials
15.3.10Stratasys Ltd.
15.3.10.1 Company Overview
15.3.10.2 Product Portfolio
15.3.10.3 Financials
15.3.11Ultimaker BV
15.3.11.1 Company Overview
15.3.11.2 Product Portfolio
15.3.12voxeljet AG
15.3.12.1 Company Overview
15.3.12.2 Product Portfolio
15.3.12.3 Financials
2 SCOPE AND METHODOLOGY
2.1Objectives of the Study
2.2Stakeholders
2.3Data Sources
2.3.1Primary Sources
2.3.2Secondary Sources
2.4Market Estimation
2.4.1Bottom-Up Approach
2.4.2Top-Down Approach
2.5Forecasting Methodology
3 EXECUTIVE SUMMARY
4 INTRODUCTION
4.1Overview
4.2Key Industry Trends
5 GLOBAL AUTOMOTIVE 3D PRINTING MARKET
5.1Market Overview
5.2Market Performance
5.3Impact of COVID-19
5.4Market Forecast
6 MARKET BREAKUP BY COMPONENT TYPE
6.1Hardware
6.1.1 Market Trends
6.1.2 Market Forecast
6.2Software
6.2.1 Market Trends
6.2.2 Market Forecast
6.3Service
6.3.1 Market Trends
6.3.2 Market Forecast
7 MARKET BREAKUP BY TECHNOLOGY TYPE
7.1Selective Laser Sintering (SLS)
7.1.1 Market Trends
7.1.2 Market Forecast
7.2Stereo Lithography (SLA)
7.2.1 Market Trends
7.2.2 Market Forecast
7.3Digital Light Processing (DLP)
7.3.1 Market Trends
7.3.2 Market Forecast
7.4Electronic Beam Melting (EBM)
7.4.1 Market Trends
7.4.2 Market Forecast
7.5Selective Laser Melting (SLM)
7.5.1 Market Trends
7.5.2 Market Forecast
7.6Fused Deposition Modeling (FDM)
7.6.1 Market Trends
7.6.2 Market Forecast
8 MARKET BREAKUP BY MATERIAL TYPE
8.1Metal
8.1.1 Market Trends
8.1.2 Market Forecast
8.2Polymer
8.2.1 Market Trends
8.2.2 Market Forecast
8.3Ceramic
8.3.1 Market Trends
8.3.2 Market Forecast
9 MARKET BREAKUP BY APPLICATION
9.1Production
9.1.1 Market Trends
9.1.2 Market Forecast
9.2Innovation and R&D
9.2.1 Market Trends
9.2.2 Market Forecast
9.3Prototyping
9.3.1 Market Trends
9.3.2 Market Forecast
10 MARKET BREAKUP BY REGION
10.1North America
10.1.1 United States
10.1.1.1 Market Trends
10.1.1.2 Market Forecast
10.1.2 Canada
10.1.2.1 Market Trends
10.1.2.2 Market Forecast
10.2Asia-Pacific
10.2.1 China
10.2.1.1 Market Trends
10.2.1.2 Market Forecast
10.2.2 Japan
10.2.2.1 Market Trends
10.2.2.2 Market Forecast
10.2.3 India
10.2.3.1 Market Trends
10.2.3.2 Market Forecast
10.2.4 South Korea
10.2.4.1 Market Trends
10.2.4.2 Market Forecast
10.2.5 Australia
10.2.5.1 Market Trends
10.2.5.2 Market Forecast
10.2.6 Indonesia
10.2.6.1 Market Trends
10.2.6.2 Market Forecast
10.2.7 Others
10.2.7.1 Market Trends
10.2.7.2 Market Forecast
10.3Europe
10.3.1 Germany
10.3.1.1 Market Trends
10.3.1.2 Market Forecast
10.3.2 France
10.3.2.1 Market Trends
10.3.2.2 Market Forecast
10.3.3 United Kingdom
10.3.3.1 Market Trends
10.3.3.2 Market Forecast
10.3.4 Italy
10.3.4.1 Market Trends
10.3.4.2 Market Forecast
10.3.5 Spain
10.3.5.1 Market Trends
10.3.5.2 Market Forecast
10.3.6 Russia
10.3.6.1 Market Trends
10.3.6.2 Market Forecast
10.3.7 Others
10.3.7.1 Market Trends
10.3.7.2 Market Forecast
10.4Latin America
10.4.1 Brazil
10.4.1.1 Market Trends
10.4.1.2 Market Forecast
10.4.2 Mexico
10.4.2.1 Market Trends
10.4.2.2 Market Forecast
10.4.3 Others
10.4.3.1 Market Trends
10.4.3.2 Market Forecast
10.5Middle East and Africa
10.5.1 Market Trends
10.5.2 Market Breakup by Country
10.5.3 Market Forecast
11 SWOT ANALYSIS
11.1Overview
11.2Strengths
11.3Weaknesses
11.4Opportunities
11.5Threats
12 VALUE CHAIN ANALYSIS
13 PORTERS FIVE FORCES ANALYSIS
13.1Overview
13.2Bargaining Power of Buyers
13.3Bargaining Power of Suppliers
13.4Degree of Competition
13.5Threat of New Entrants
13.6Threat of Substitutes
14 PRICE ANALYSIS
15 COMPETITIVE LANDSCAPE
15.1Market Structure
15.2Key Players
15.3Profiles of Key Players
15.3.13D Systems Inc.
15.3.1.1 Company Overview
15.3.1.2 Product Portfolio
15.3.1.3 Financials
15.3.1.4 SWOT Analysis
15.3.23DGence
15.3.2.1 Company Overview
15.3.2.2 Product Portfolio
15.3.3Autodesk Inc.
15.3.3.1 Company Overview
15.3.3.2 Product Portfolio
15.3.3.3 Financials
15.3.3.4 SWOT Analysis
15.3.4Desktop Metal Inc.
15.3.4.1 Company Overview
15.3.4.2 Product Portfolio
15.3.5EOS GmbH
15.3.5.1 Company Overview
15.3.5.2 Product Portfolio
15.3.6Formlabs Inc.
15.3.6.1 Company Overview
15.3.6.2 Product Portfolio
15.3.7Hцganдs AB
15.3.7.1 Company Overview
15.3.7.2 Product Portfolio
15.3.8Materialise NV
15.3.8.1 Company Overview
15.3.8.2 Product Portfolio
15.3.8.3 Financials
15.3.9SLM Solutions Group AG
15.3.9.1 Company Overview
15.3.9.2 Product Portfolio
15.3.9.3 Financials
15.3.10Stratasys Ltd.
15.3.10.1 Company Overview
15.3.10.2 Product Portfolio
15.3.10.3 Financials
15.3.11Ultimaker BV
15.3.11.1 Company Overview
15.3.11.2 Product Portfolio
15.3.12voxeljet AG
15.3.12.1 Company Overview
15.3.12.2 Product Portfolio
15.3.12.3 Financials
LIST OF TABLES
Table 1: Global: Automotive 3D Printing Market: Key Industry Highlights, 2022 and 2028
Table 2: Global: Automotive 3D Printing Market Forecast: Breakup by Component Type (in Million US$), 2023-2028
Table 3: Global: Automotive 3D Printing Market Forecast: Breakup by Technology Type (in Million US$), 2023-2028
Table 4: Global: Automotive 3D Printing Market Forecast: Breakup by Material Type (in Million US$), 2023-2028
Table 5: Global: Automotive 3D Printing Market Forecast: Breakup by Application (in Million US$), 2023-2028
Table 6: Global: Automotive 3D Printing Market Forecast: Breakup by Region (in Million US$), 2023-2028
Table 7: Global: Automotive 3D Printing Market: Competitive Structure
Table 8: Global: Automotive 3D Printing Market: Key Players
Table 1: Global: Automotive 3D Printing Market: Key Industry Highlights, 2022 and 2028
Table 2: Global: Automotive 3D Printing Market Forecast: Breakup by Component Type (in Million US$), 2023-2028
Table 3: Global: Automotive 3D Printing Market Forecast: Breakup by Technology Type (in Million US$), 2023-2028
Table 4: Global: Automotive 3D Printing Market Forecast: Breakup by Material Type (in Million US$), 2023-2028
Table 5: Global: Automotive 3D Printing Market Forecast: Breakup by Application (in Million US$), 2023-2028
Table 6: Global: Automotive 3D Printing Market Forecast: Breakup by Region (in Million US$), 2023-2028
Table 7: Global: Automotive 3D Printing Market: Competitive Structure
Table 8: Global: Automotive 3D Printing Market: Key Players
LIST OF FIGURES
Figure 1: Global: Automotive 3D Printing Market: Major Drivers and Challenges
Figure 2: Global: Automotive 3D Printing Market: Sales Value (in Billion US$), 2017-2022
Figure 3: Global: Automotive 3D Printing Market Forecast: Sales Value (in Billion US$), 2023-2028
Figure 4: Global: Automotive 3D Printing Market: Breakup by Component Type (in %), 2022
Figure 5: Global: Automotive 3D Printing Market: Breakup by Technology Type (in %), 2022
Figure 6: Global: Automotive 3D Printing Market: Breakup by Material Type (in %), 2022
Figure 7: Global: Automotive 3D Printing Market: Breakup by Application (in %), 2022
Figure 8: Global: Automotive 3D Printing Market: Breakup by Region (in %), 2022
Figure 9: Global: Automotive 3D Printing (Hardware) Market: Sales Value (in Million US$), 2017 & 2022
Figure 10: Global: Automotive 3D Printing (Hardware) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 11: Global: Automotive 3D Printing (Software) Market: Sales Value (in Million US$), 2017 & 2022
Figure 12: Global: Automotive 3D Printing (Software) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 13: Global: Automotive 3D Printing (Service) Market: Sales Value (in Million US$), 2017 & 2022
Figure 14: Global: Automotive 3D Printing (Service) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 15: Global: Automotive 3D Printing (Selective Laser Sintering (SLS)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 16: Global: Automotive 3D Printing (Selective Laser Sintering (SLS)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 17: Global: Automotive 3D Printing (Stereo Lithography (SLA)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 18: Global: Automotive 3D Printing (Stereo Lithography (SLA)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 19: Global: Automotive 3D Printing (Digital Light Processing (DLP)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 20: Global: Automotive 3D Printing (Digital Light Processing (DLP)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 21: Global: Automotive 3D Printing (Electronic Beam Melting (EBM)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 22: Global: Automotive 3D Printing (Electronic Beam Melting (EBM)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 23: Global: Automotive 3D Printing (Selective Laser Melting (SLM)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 24: Global: Automotive 3D Printing (Selective Laser Melting (SLM)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 25: Global: Automotive 3D Printing (Fused Deposition Modeling (FDM)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 26: Global: Automotive 3D Printing (Fused Deposition Modeling (FDM)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 27: Global: Automotive 3D Printing (Metal) Market: Sales Value (in Million US$), 2017 & 2022
Figure 28: Global: Automotive 3D Printing (Metal) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 29: Global: Automotive 3D Printing (Polymer) Market: Sales Value (in Million US$), 2017 & 2022
Figure 30: Global: Automotive 3D Printing (Polymer) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 31: Global: Automotive 3D Printing (Ceramic) Market: Sales Value (in Million US$), 2017 & 2022
Figure 32: Global: Automotive 3D Printing (Ceramic) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 33: Global: Automotive 3D Printing (Production) Market: Sales Value (in Million US$), 2017 & 2022
Figure 34: Global: Automotive 3D Printing (Production) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 35: Global: Automotive 3D Printing (Innovation and R&D) Market: Sales Value (in Million US$), 2017 & 2022
Figure 36: Global: Automotive 3D Printing (Innovation and R&D) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 37: Global: Automotive 3D Printing (Prototyping) Market: Sales Value (in Million US$), 2017 & 2022
Figure 38: Global: Automotive 3D Printing (Prototyping) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 39: North America: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 40: North America: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 41: United States: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 42: United States: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 43: Canada: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 44: Canada: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 45: Asia-Pacific: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 46: Asia-Pacific: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 47: China: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 48: China: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 49: Japan: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 50: Japan: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 51: India: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 52: India: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 53: South Korea: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 54: South Korea: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 55: Australia: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 56: Australia: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 57: Indonesia: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 58: Indonesia: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 59: Others: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 60: Others: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 61: Europe: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 62: Europe: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 63: Germany: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 64: Germany: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 65: France: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 66: France: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 67: United Kingdom: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 68: United Kingdom: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 69: Italy: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 70: Italy: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 71: Spain: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 72: Spain: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 73: Russia: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 74: Russia: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 75: Others: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 76: Others: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 77: Latin America: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 78: Latin America: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 79: Brazil: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 80: Brazil: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 81: Mexico: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 82: Mexico: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 83: Others: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 84: Others: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 85: Middle East and Africa: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 86: Middle East and Africa: Automotive 3D Printing Market: Breakup by Country (in %), 2022
Figure 87: Middle East and Africa: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 88: Global: Automotive 3D Printing Industry: SWOT Analysis
Figure 89: Global: Automotive 3D Printing Industry: Value Chain Analysis
Figure 90: Global: Automotive 3D Printing Industry: Porter's Five Forces Analysis
Figure 1: Global: Automotive 3D Printing Market: Major Drivers and Challenges
Figure 2: Global: Automotive 3D Printing Market: Sales Value (in Billion US$), 2017-2022
Figure 3: Global: Automotive 3D Printing Market Forecast: Sales Value (in Billion US$), 2023-2028
Figure 4: Global: Automotive 3D Printing Market: Breakup by Component Type (in %), 2022
Figure 5: Global: Automotive 3D Printing Market: Breakup by Technology Type (in %), 2022
Figure 6: Global: Automotive 3D Printing Market: Breakup by Material Type (in %), 2022
Figure 7: Global: Automotive 3D Printing Market: Breakup by Application (in %), 2022
Figure 8: Global: Automotive 3D Printing Market: Breakup by Region (in %), 2022
Figure 9: Global: Automotive 3D Printing (Hardware) Market: Sales Value (in Million US$), 2017 & 2022
Figure 10: Global: Automotive 3D Printing (Hardware) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 11: Global: Automotive 3D Printing (Software) Market: Sales Value (in Million US$), 2017 & 2022
Figure 12: Global: Automotive 3D Printing (Software) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 13: Global: Automotive 3D Printing (Service) Market: Sales Value (in Million US$), 2017 & 2022
Figure 14: Global: Automotive 3D Printing (Service) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 15: Global: Automotive 3D Printing (Selective Laser Sintering (SLS)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 16: Global: Automotive 3D Printing (Selective Laser Sintering (SLS)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 17: Global: Automotive 3D Printing (Stereo Lithography (SLA)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 18: Global: Automotive 3D Printing (Stereo Lithography (SLA)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 19: Global: Automotive 3D Printing (Digital Light Processing (DLP)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 20: Global: Automotive 3D Printing (Digital Light Processing (DLP)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 21: Global: Automotive 3D Printing (Electronic Beam Melting (EBM)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 22: Global: Automotive 3D Printing (Electronic Beam Melting (EBM)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 23: Global: Automotive 3D Printing (Selective Laser Melting (SLM)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 24: Global: Automotive 3D Printing (Selective Laser Melting (SLM)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 25: Global: Automotive 3D Printing (Fused Deposition Modeling (FDM)) Market: Sales Value (in Million US$), 2017 & 2022
Figure 26: Global: Automotive 3D Printing (Fused Deposition Modeling (FDM)) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 27: Global: Automotive 3D Printing (Metal) Market: Sales Value (in Million US$), 2017 & 2022
Figure 28: Global: Automotive 3D Printing (Metal) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 29: Global: Automotive 3D Printing (Polymer) Market: Sales Value (in Million US$), 2017 & 2022
Figure 30: Global: Automotive 3D Printing (Polymer) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 31: Global: Automotive 3D Printing (Ceramic) Market: Sales Value (in Million US$), 2017 & 2022
Figure 32: Global: Automotive 3D Printing (Ceramic) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 33: Global: Automotive 3D Printing (Production) Market: Sales Value (in Million US$), 2017 & 2022
Figure 34: Global: Automotive 3D Printing (Production) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 35: Global: Automotive 3D Printing (Innovation and R&D) Market: Sales Value (in Million US$), 2017 & 2022
Figure 36: Global: Automotive 3D Printing (Innovation and R&D) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 37: Global: Automotive 3D Printing (Prototyping) Market: Sales Value (in Million US$), 2017 & 2022
Figure 38: Global: Automotive 3D Printing (Prototyping) Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 39: North America: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 40: North America: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 41: United States: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 42: United States: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 43: Canada: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 44: Canada: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 45: Asia-Pacific: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 46: Asia-Pacific: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 47: China: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 48: China: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 49: Japan: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 50: Japan: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 51: India: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 52: India: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 53: South Korea: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 54: South Korea: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 55: Australia: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 56: Australia: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 57: Indonesia: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 58: Indonesia: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 59: Others: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 60: Others: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 61: Europe: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 62: Europe: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 63: Germany: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 64: Germany: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 65: France: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 66: France: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 67: United Kingdom: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 68: United Kingdom: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 69: Italy: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 70: Italy: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 71: Spain: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 72: Spain: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 73: Russia: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 74: Russia: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 75: Others: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 76: Others: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 77: Latin America: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 78: Latin America: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 79: Brazil: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 80: Brazil: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 81: Mexico: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 82: Mexico: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 83: Others: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 84: Others: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 85: Middle East and Africa: Automotive 3D Printing Market: Sales Value (in Million US$), 2017 & 2022
Figure 86: Middle East and Africa: Automotive 3D Printing Market: Breakup by Country (in %), 2022
Figure 87: Middle East and Africa: Automotive 3D Printing Market Forecast: Sales Value (in Million US$), 2023-2028
Figure 88: Global: Automotive 3D Printing Industry: SWOT Analysis
Figure 89: Global: Automotive 3D Printing Industry: Value Chain Analysis
Figure 90: Global: Automotive 3D Printing Industry: Porter's Five Forces Analysis
