U.S. Market for Dental Prosthetics and CAD/CAM Devices 2009
In 2008, there were over 60 million units of dental prosthetic devices sold. While the growth rate has declined due to the economic recession in 2008 and is expected to continue declining late into 2009, this number is expected to steadily recover, reaching over 80 million by the end of the forecast period. The number of patients requiring dental restorations is increasing, especially as baby boomers age. In addition, Americans are becoming more concerned with their appearance, and hence, dentists are performing more cosmetically-driven procedures.
LIST OF FIGURES
LIST OF CHARTS
EXECUTIVE SUMMARY
1.1 OVERVIEW:MARKET FOR DENTAL PROSTHETICS
1.2 MARKET FOR CROWNS AND BRIDGES
1.3 CROWNS AND BRIDGES MARKET SEGMENTATION
1.4 MARKET FOR INLAYS AND ONLAYS
1.5 MARKET FOR VENEERS
1.6 MARKET FOR DENTURES
1.7 MARKET FOR CAD/CAMSYSTEMS, BLOCKS, AND PROSTHETICS
1.8 DIGITAL IMPRESSION TAKING SYSTEMS
1.9 COMPETITIVE ANALYSIS
1.9.1 Leading Laboratories
1.9.2 Leading CAD/CAM Competitors
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
OVERVIEW OF DENTAL PROSTHETICS
3.1 INTRODUCTION TO DENTAL PROSTHETIC DEVICES
3.1.1 Statistics on Dental Health in the U.S.
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.3 Material Types
3.2.3.1 Full-Cast Crowns and Bridges
3.2.3.2 Porcelain-Fused Metal: Semi-Precious and Precious Alloys
3.2.3.3 Porcelain-Fused Metal: Non-Precious Alloys
3.2.3.4 All-Ceramic Devices
3.3 INLAYS AND ONLAYS
3.3.1 Material Types
3.3.1.1 Gold
3.3.1.2 Porcelain
3.3.1.3 Composite Resin
3.4 VENEERS
3.4.1 Material Types
3.4.1.1 Porcelain
3.4.1.2 Composite Resin
3.5 DENTURES
3.5.1 Full Dentures
3.5.2 Partial Dentures
3.6 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.6.1 Conventional Fabrication
3.6.2 CAD/CAM Technology
3.6.3 Three-Dimensional Printing
3.6.4 Digital Impression-Taking
TOTAL MARKET FOR DENTAL PROSTHETICS
4.1 INTRODUCTION
4.2 MARKET ANALYSIS AND FORECAST
4.3 MARKET SEGMENTATION
4.3.1 Market Value by Prosthetics Type
4.3.2 Units Sold by Prosthetics Type
4.3.3 Effects of the Economic Crisis
4.4 THE MARKET FOR DENTAL IMPLANT PROSTHETICS
4.4.1 Introduction
4.4.2 Dental Implant Penetration in the Market for Dental Prosthetics
4.5 MARKET DRIVERS
4.5.1 New Technologies
4.5.2 Outsourcing
4.5.3 Demand for Improved Aesthetics
4.5.4 Demographic Factors
4.6 MARKET LIMITERS
4.6.1 Labor Costs
4.6.2 Improved Oral Hygiene
4.6.3 Economic Factors
4.7 COMPETITIVE ANALYSIS
4.8 MERGERS AND ACQUISITIONS
4.8.1 Nobel Biocare Acquisition of BioCAD and Alliance with Optimet
CROWNS AND BRIDGES MARKET
5.1 INTRODUCTION
5.2 MARKET ANALYSIS AND FORECAST
5.3 MARKET FOR CROWNS
5.3.1 Market Analysis and Forecast
5.3.1.1 Units Sold
5.3.1.2 Average Selling Price
5.4 MARKET FOR BRIDGES
5.4.1 Market Analysis and Forecast
5.4.1.1 Units Sold
5.4.1.2 Average Selling Price
5.5 MARKET SEGMENTED BY MATERIAL TYPE
5.5.1 Full-Cast
5.5.2 All-Ceramic
5.5.3 Porcelain-Fused Metal: Non-Precious Alloys
5.5.4 Porcelain-Fused Metal: Semi-Precious Alloys
5.5.5 Porcelain-Fused Metal: Precious Alloys
5.6 MARKET DRIVERS
5.6.1 Improvements in Dental Health
5.6.2 New Technologies
5.6.3 Improving Track Record of All-Ceramics
5.6.4 Cosmetics
5.7 MARKET LIMITERS
5.7.1 Improvements in Dental Health
5.7.2 Current Economic Downturn
5.7.3 Implant Based Restorations
5.8 COMPETITIVE ANALYSIS
INLAYS AND ONLAYS MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.2.1 Units Sold
6.2.2 Average Selling Price
6.3 MARKET SEGMENTED BY MATERIAL TYPE
6.3.1 Gold
6.3.2 Porcelain
6.3.3 Composite Resin
6.4 MARKET DRIVERS
6.4.1 Chairside CAD/CAM technology
6.5 MARKET LIMITERS
6.5.1 Economic Factors
6.6 COMPETITIVE ANALYSIS
VENEERS MARKET
7.1 INTRODUCTION
7.2 MARKET ANALYSIS AND FORECAST
7.2.1 Units Sold
7.2.2 Average Selling Price
7.3 MARKET SEGMENTED BY MATERIAL TYPE
7.3.1 Porcelain
7.3.2 Composite Resin
7.4 MARKET DRIVERS
7.4.1 Demand for Improved Aesthetics
7.5 MARKET LIMITERS
7.5.1 Price
7.5.2 Alternative Procedures
7.6 COMPETITIVE ANALYSIS
DENTURES MARKET
8.1 INTRODUCTION
8.2 MARKET ANALYSIS AND FORECAST
8.2.1 Units Sold
8.2.2 Average Selling Price
8.3 MARKET SEGMENTED BY TYPE
8.3.1 Full Dentures
8.3.2 Partial Dentures
8.4 MARKET FOR FALSE TEETH
8.4.1 Market Analysis and Forecast
8.4.2 Units Sold
8.4.3 Average Selling Price
8.5 MARKET SEGMENTED BY MATERIAL TYPE
8.5.1 Acrylic
8.5.2 Porcelain
8.5.3 Composite Resin
8.6 MARKET DRIVERS
8.6.1 Demographic Factors
8.6.2 Mini-Implants with Dentures
8.6.3 Growth of Corporate Dental Chains
8.7 MARKET LIMITERS
8.7.1 Improvements in Dental Health
8.8 COMPETITIVE ANALYSIS
CAD/CAM SYSTEMS MARKET
9.1 INTRODUCTION
9.2 MARKET FOR IN-LAB CAD/CAMSYSTEMS
9.2.1 Full In-Lab Systems
9.2.1.1 Market Analysis and Forecast
9.2.1.2 Competitive Analysis
9.2.2 Standalone Scanner CAD/CAM Systems
9.2.2.1 Competitive Analysis
9.2.3 In-Lab CAD/CAM Systems Competitive Analysis
9.3 MARKET FOR CHAIRSIDE CAD/CAMSYSTEMS
9.3.1 Market Analysis and Forecast
9.3.2 Competitive Analysis: Chairside Systems
9.4 MARKET DRIVERS
9.4.1 Demand for All-Ceramic Restorations
9.4.2 Shortage of Skilled Labor
9.4.3 Decreasing Prices
9.4.4 Technological Improvements
9.5 MARKET LIMITERS
9.5.1 PFM Restorations
9.5.2 Three-Dimensional Printing Technology
9.5.3 Cost of Investment
9.5.4 Technological Limitations
9.5.5 Economic Downturn
9.6 COMPETITIVE ANALYSIS
9.6.1 Full CAD/CAM Systems
9.6.2 Standalone Scanner CAD/CAM Systems
9.6.3 Chairside CAD/CAM Systems
9.6.4 Overall CAD/CAM Systems
CAD/CAM BLOCKS AND PROSTHETIC DEVICES MARKET
10.1 INTRODUCTION
10.2 MARKET ANALYSIS FOR CAD/CAMBLOCKS
10.2.1 Market Analysis and Forecast
10.2.2 Units Sold
10.2.3 Average Selling Price
10.2.4 Market Segmented by Material Type
10.2.4.1 Zirconia
10.2.4.2 Porcelain
10.2.4.3 Acrylic
10.2.5 Competitive Analysis
10.3 MARKET FOR CAD/CAMPROSTHETICS
10.3.1 Chairside Prosthetic Devices147
10.3.1.1 Market Analysis and Forecast
10.3.1.2 Competitive Analysis: Chairside Prosthetics
10.3.2 In-Lab Prosthetic Devices
10.3.2.1 Market Analysis and Forecast
10.3.2.2 Competitive Analysis: In-Lab Prosthetics
10.3.3 Penetration Rates
10.4 MARKET DRIVERS
10.4.1 Improving Track Record of All-Ceramic Restorations
10.5 MARKET LIMITERS
10.5.1 Initial Investment into CAD/CAM Systems
10.5.2 Adoption of CAD/CAM Technology
DIGITAL IMPRESSION-TAKING SYSTEMS MARKET
11.1 INTRODUCTION
11.2 MARKET ANALYSIS AND FORECAST.
11.2.1 Units Sold
11.2.2 Average Selling Price
11.3 MARKET DRIVERS
11.3.1 Productivity Enhancements
11.3.2 Affordable Alternative
11.4 LIMITERS
11.4.1 Hesitance of Early Majority Practitioners
11.5 COMPETITIVE ANALYSIS
COMPETITORS IN THE MARKET FOR AUTOMATED PROSTHETIC
MANUFACTURING
12.1 INTRODUCTION
12.2 CAD/CAMSYSTEMS
12.2.1 3M ESPE
12.2.2 3Shape A/S
12.2.3 D4D Technologies, LLC
12.2.4 Dental Wings
12.2.5 DENTSPLY International
12.2.6 etkon AG
12.2.7 KaVo Dental Corporation
12.2.8 Nobel Biocare
12.2.9 Noritake Dental Supply
12.2.10 Sirona Dental Systems
12.2.11 Wieland Dental and Technik
12.3 DIGITAL IMPRESSION TAKING SYSTEMS
12.3.1 Cadent
12.3.2 3M ESPE
12.4 RAPID PROTOTYPING SYSTEMS
12.4.1 imagen
12.4.2 3D Systems
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
OVERVIEW OF DENTAL PROSTHETICS
TOTAL MARKET FOR DENTAL PROSTHETICS
Figure 4-1: Market for Dental Prosthetics, U.S., 2005 – 2015
Figure 4-2: Market Shares by Prosthetics Type, U.S., 2005 – 2015
Figure 4-3: Unit Shares by Prosthetics Type, 2005 – 2015
Figure 4-4: Number of Dental Implant Prosthetic Devices, U.S., 2005 – 2015
Figure 4-5: Market Drivers and Limiters for Dental Prosthetics, U.S., 2008
Figure 4-6: Leading Competitors in the Market for Dental Prosthetics, U.S., 2007
CROWNS AND BRIDGES MARKET
Figure 5-1: Market for Crowns and Bridges, U.S., 2005 – 2015
Figure 5-2: Market for Crowns, U.S., 2005 – 2015
Figure 5-3: Market for Bridges, U.S., 2005 – 2015
Figure 5-4: Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
Figure 5-5: Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
Figure 5-6: Market for Full-Cast Crowns and Bridges, U.S., 2005 – 2015
Figure 5-7: Market for All-Ceramic Crowns and Bridges, U.S., 2005 – 2015
Figure 5-8: Market for PFM Non-Precious Alloy Crowns and Bridges, U.S., 2005 – 2015
Figure 5-9: Market for PFM Semi-Precious Alloy Crowns and Bridges, U.S., 2005 – 2015
Figure 5-10: Market for PFM Precious Alloy Crowns and Bridges, U.S., 2005 – 2015
Figure 5-11: Market Drivers and Limiters, Crowns and Bridges, U.S., 2008
Figure 5-12: Leading Competitors in the Market for Crowns and Bridges, U.S., 2008
INLAYS & ONLAYS MARKET
Figure 6-1 – Market for Inlays and Onlays, U.S., 2005 – 2015
Figure 6-2: Market for Inlays and Onlays Segmented by Type, U.S., 2005 – 2015
Figure 6-3 Inlays and Onlays Segmented by Material Type, U.S., 2005 – 2015
Figure 6-4 Leading Competitors in the Market for Inlays/Onlays, U.S., 2008
VENEERS MARKET
Figure 7-1: Market for Veneers, U.S., 2005 – 2015
Figure 7-2 – Market for Veneers Segmented by Type, U.S., 2005 – 2015
Figure 7-3 – Veneers Unit Share by Material Type, U.S., 2005 – 2015
Figure 7-4 – Market Drivers and Limiters, Veneers, U.S., 2008
Figure 7-5 Leading Competitors in the Market for Veneers, U.S., 2008
DENTURES MARKET
Figure 8-1: Market for Dentures, U.S., 2005 – 2015
Figure 8-2: Dentures Segmented by Type, U.S., 2005 – 2015
Figure 8-3: Market for Dentures Segmented by Type, U.S., 2005 – 2015
Figure 8-4: Market for Denture False Teeth, U.S., 2005 – 2015
Figure 8-5 Market for Denture False Teeth Segmented by Type, U.S., 2005 – 2015
Figure 8-6 Denture False Teeth Segmented by Material Type, U.S., 2005 – 2015
Figure 8-7 – Market Drivers and Limiters, Dentures, U.S., 2008
Figure 8-8: Leading Competitors in the Market for Dental Prosthetics, U.S., 2008
Figure 8-9: Leading Competitors in the Market for False Teeth, U.S., 2008 105 CAD/CAM SYSTEMS MARKET
Figure 9-1: Market for Full In-Lab CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-2: Number of Full In-Lab CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-3: Leading Competitors, Full In-Lab CAD/CAM Systems, U.S., 2008
Figure 9-4: Market for Standalone Scanner In-Lab CAD/CAM systems, U.S., 2005 – 2015
Figure 9-5: Number of Standalone Scanner CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-6: Leading Competitors, Standalone Scanner CAD/CAM Systems, U.S., 2008
Figure 9-7: Total Market Share of In-Lab CAD/CAM Systems, U.S., 2008
Figure 9-8: Market for Chairside CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-9: Number of Chairside CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-10: Share of Chairside CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Figure 9-11: Share of Total Chairside CAD/CAM Systems Sold, U.S., 2005 – 2015
Figure 9-12: Market Drivers and Limiters, CAD/CAM, U.S., 2008
Figure 9-13: Total Market Share of CAD/CAM Systems, U.S., 2008
CAD/CAM BLOCKS AND PROSTHETIC DEVICES MARKET
Figure 10-1: Market for CAD/CAM Blocks, U.S., 2005 – 2015
Figure 10-2: Market for CAD/CAM Blocks Segmented by Type, U.S., 2005 – 2015
Figure 10-3: Leading Competitors, CAD/CAM Blocks, U.S., 2008
Figure 10-4: Market for Chairside CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Figure 10-5: Leading Competitors, CAD/CAM Prosthetic Devices, U.S., 2008
Figure 10-6 – Market for In-Lab CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Figure 10-7: Leading Competitors, In-Lab CAD/CAM Prosthetic Devices, U.S., 2008
Figure 10-8: Percentage of Prosthetic Devices Fabricated with CAD/CAM Technology vs. Conventional Methods, U.S., 2005 – 2015
DIGITAL IMPRESSION-TAKING SYSTEMS
Figure 11-1: Market for Digital Impression Taking Systems, U.S., 2005 – 2015
Figure 11-2: Number of Digital Impression Taking Systems, U.S., 2005 – 2015
Figure 11-3: Market Drivers and Limiters, Digital Impression Taking Systems, U.S., 2008
Figure 11-4: Leading Competitors, Digital Impression Taking Systems, U.S., 2008
COMPETITORS IN THE MARKET FOR AUTOMATED PROSTHETIC
MANUFACTURING
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Market for Dental Prosthetics, U.S., 2005 – 2015
Chart 1-2: Dental Prosthetics Unit Share by Type, U.S., 2005 – 2015
Chart 1-3: Market for Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
Chart 1-4: Market for Inlays and Onlays Segmented by Material Type, U.S., 2005 – 2015
Chart 1-5: Market for Veneers, U.S., 2005 – 2015
Chart 1-6: Dentures Unit Share by Type, U.S., 2005 – 2015
Chart 1-7: Percentage of Prosthetic Devices Fabricated with CAD/CAM Technology vs. Conventional Methods, U.S., 2005 – 2015
Chart 1-8: Market for Digital Impression Taking Systems, U.S., 2005 – 2015
Chart 1-9: Market Share for In-Lab CAD/CAM Systems, U.S., 2008
RESEARCH METHODOLOGY
OVERVIEW OF DENTAL PROSTHETICS
Chart 3-1: Prevalence of Coronal Caries Among Dentate Adults in the U.S.
Chart 3-2: Mean Number of Teeth Among Dentate Adults in the U.S.
Chart 3-3: Prevalence of Edentulism Among Dentate Adults in the U.S.
TOTAL MARKET FOR DENTAL PROSTHETICS
Chart 4-1: Dental Prosthetics Market Value, U.S., 2005 – 2015
Chart 4-2: Market Shares by Prosthetics Type, U.S., 2008
Chart 4-3: Market Shares by Prosthetics Type, U.S., 2005 – 2015
Chart 4-4: Unit Shares by Prosthetics Type, U.S., 2008
Chart 4-5: Unit Shares by Prosthetics Type, U.S., 2005 – 2015
Chart 4-6: Implant Prosthetics Unit Shares, U.S., 2005 – 2015
Chart 4-7: Leading Competitors in the Market for Dental Prosthetics, U.S., 2008
CROWNS AND BRIDGES MARKET
Chart 5-1: Crowns and Bridges Market Value, U.S., 2005 – 2015
Chart 5-2: Number of Crown Units Sold, U.S., 2005 – 2015
Chart 5-3: Average Selling Price per Crown Unit, U.S., 2005 – 2015
Chart 5-4: Number of Units of Bridges Sold, U.S., 2005 – 2015
Chart 5-5: Average Selling Price per Bridge Unit, U.S., 2005 – 2015
Chart 5-6: Crowns and Bridges Units Segmented by Material Type, U.S., 2008
Chart 5-7: Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
INLAYS AND ONLAYS MARKET
Chart 6-1: Market and Growth Rates for Inlays and Onlays, U.S., 2005 – 2015
Chart 6-2: Number of Inlay and Onlay Units Sold, U.S., 2005 – 2015
Chart 6-3: Average Selling Price per Inlay and Onlay Unit, U.S., 2005 – 2015
Chart 6-4: Inlays and Onlays Market Segmented by Material Type, U.S., 2005 – 2015
VENEERS MARKET
Chart 7-1: Veneer Units Segmented by Material Type, U.S., 2008
Chart 7-2: Number of Veneer Units Sold, U.S., 2005 – 2015
Chart 7-3: Average Selling Price per Veneer Unit, U.S., 2005 – 2015
DENTURES MARKET
Chart 8-1: Denture Units Segmented by Type, U.S., 2008
Chart 8-2: Number of Denture Units Sold, U.S., 2005 – 2015
Chart 8-3: Average Selling Price per Denture Unit, U.S., 2005 – 2015
Chart 8-4 Market and Growth Raters for Denture False Teeth, U.S., 2005 - 2015
DENTAL CAD/CAM SYSTEMS MARKET
Chart 9-1: Market for Full In-Lab CAD/CAM Systems, U.S., 2005 – 2015
Chart 9-2: Number of Full In-Lab CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-3: Total Number of Full In-Lab CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-4: Leading Competitors, Full In-Lab CAD/CAM System Units, U.S., 2008
Chart 9-5: Market Value for Standalone Scanner CAD/CAM Systems, U.S., 2005= –2015
Chart 9-6: Number of Standalone Scanner CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-7: Total Number of Standalone Scanner CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-8: Leading Competitors, Standalone Scanner CAD/CAM Systems, U.S., 2008
Chart 9-9: Total Market Share of In-Lab CAD/CAM Systems, U.S., 2008
Chart 9-10: Market Value, Chairside CAD/CAM Systems, U.S., 2005 – 2015
Chart 9-11: Number of Chairside CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-12: Total Number of Chairside CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-13: Percent of Chairside CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-14: Percentage of Total Chairside CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-15: Total Market Share of CAD/CAM System, U.S., 2008
CAD/CAM BLOCKS AND PROSTHETIC DEVICES MARKET
Chart 10-1: Number of CAD/CAM Blocks Sold, U.S., 2005 – 2015
Chart 10-2: Average Selling Price per CAD/CAM Block, U.S., 2005 – 2015
Chart 10-3: CAD/CAM Blocks Segmented by Type, U.S., 2005 – 2015
Chart 10-4: Market for Chairside CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Chart 10-5: Market for In-Lab CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Chart 10-6: Leading Competitors, In-Lab CAD/CAM Prosthetic Devices, U.S., 2008
Chart 10-7: Percentage of Prosthetic Devices Fabricated with CAD/CAM Technology vs. Conventional Methods, U.S., 2005 – 2015 156 Digital Impression-Taking Systems Market
Chart 11-1: Number of Digital Impression Taking Systems Sold, U.S., 2005 – 2015
Chart 11-2 Average Selling Price per Digital Impression Taking System, U.S., 2005 – 2015
COMPETITORS IN THE MARKET FOR AUTOMATED PROSTHETIC
MANUFACTURING
EXECUTIVE SUMMARY
1.1 OVERVIEW:MARKET FOR DENTAL PROSTHETICS
1.2 MARKET FOR CROWNS AND BRIDGES
1.3 CROWNS AND BRIDGES MARKET SEGMENTATION
1.4 MARKET FOR INLAYS AND ONLAYS
1.5 MARKET FOR VENEERS
1.6 MARKET FOR DENTURES
1.7 MARKET FOR CAD/CAMSYSTEMS, BLOCKS, AND PROSTHETICS
1.8 DIGITAL IMPRESSION TAKING SYSTEMS
1.9 COMPETITIVE ANALYSIS
1.9.1 Leading Laboratories
1.9.2 Leading CAD/CAM Competitors
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
OVERVIEW OF DENTAL PROSTHETICS
3.1 INTRODUCTION TO DENTAL PROSTHETIC DEVICES
3.1.1 Statistics on Dental Health in the U.S.
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.3 Material Types
3.2.3.1 Full-Cast Crowns and Bridges
3.2.3.2 Porcelain-Fused Metal: Semi-Precious and Precious Alloys
3.2.3.3 Porcelain-Fused Metal: Non-Precious Alloys
3.2.3.4 All-Ceramic Devices
3.3 INLAYS AND ONLAYS
3.3.1 Material Types
3.3.1.1 Gold
3.3.1.2 Porcelain
3.3.1.3 Composite Resin
3.4 VENEERS
3.4.1 Material Types
3.4.1.1 Porcelain
3.4.1.2 Composite Resin
3.5 DENTURES
3.5.1 Full Dentures
3.5.2 Partial Dentures
3.6 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.6.1 Conventional Fabrication
3.6.2 CAD/CAM Technology
3.6.3 Three-Dimensional Printing
3.6.4 Digital Impression-Taking
TOTAL MARKET FOR DENTAL PROSTHETICS
4.1 INTRODUCTION
4.2 MARKET ANALYSIS AND FORECAST
4.3 MARKET SEGMENTATION
4.3.1 Market Value by Prosthetics Type
4.3.2 Units Sold by Prosthetics Type
4.3.3 Effects of the Economic Crisis
4.4 THE MARKET FOR DENTAL IMPLANT PROSTHETICS
4.4.1 Introduction
4.4.2 Dental Implant Penetration in the Market for Dental Prosthetics
4.5 MARKET DRIVERS
4.5.1 New Technologies
4.5.2 Outsourcing
4.5.3 Demand for Improved Aesthetics
4.5.4 Demographic Factors
4.6 MARKET LIMITERS
4.6.1 Labor Costs
4.6.2 Improved Oral Hygiene
4.6.3 Economic Factors
4.7 COMPETITIVE ANALYSIS
4.8 MERGERS AND ACQUISITIONS
4.8.1 Nobel Biocare Acquisition of BioCAD and Alliance with Optimet
CROWNS AND BRIDGES MARKET
5.1 INTRODUCTION
5.2 MARKET ANALYSIS AND FORECAST
5.3 MARKET FOR CROWNS
5.3.1 Market Analysis and Forecast
5.3.1.1 Units Sold
5.3.1.2 Average Selling Price
5.4 MARKET FOR BRIDGES
5.4.1 Market Analysis and Forecast
5.4.1.1 Units Sold
5.4.1.2 Average Selling Price
5.5 MARKET SEGMENTED BY MATERIAL TYPE
5.5.1 Full-Cast
5.5.2 All-Ceramic
5.5.3 Porcelain-Fused Metal: Non-Precious Alloys
5.5.4 Porcelain-Fused Metal: Semi-Precious Alloys
5.5.5 Porcelain-Fused Metal: Precious Alloys
5.6 MARKET DRIVERS
5.6.1 Improvements in Dental Health
5.6.2 New Technologies
5.6.3 Improving Track Record of All-Ceramics
5.6.4 Cosmetics
5.7 MARKET LIMITERS
5.7.1 Improvements in Dental Health
5.7.2 Current Economic Downturn
5.7.3 Implant Based Restorations
5.8 COMPETITIVE ANALYSIS
INLAYS AND ONLAYS MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.2.1 Units Sold
6.2.2 Average Selling Price
6.3 MARKET SEGMENTED BY MATERIAL TYPE
6.3.1 Gold
6.3.2 Porcelain
6.3.3 Composite Resin
6.4 MARKET DRIVERS
6.4.1 Chairside CAD/CAM technology
6.5 MARKET LIMITERS
6.5.1 Economic Factors
6.6 COMPETITIVE ANALYSIS
VENEERS MARKET
7.1 INTRODUCTION
7.2 MARKET ANALYSIS AND FORECAST
7.2.1 Units Sold
7.2.2 Average Selling Price
7.3 MARKET SEGMENTED BY MATERIAL TYPE
7.3.1 Porcelain
7.3.2 Composite Resin
7.4 MARKET DRIVERS
7.4.1 Demand for Improved Aesthetics
7.5 MARKET LIMITERS
7.5.1 Price
7.5.2 Alternative Procedures
7.6 COMPETITIVE ANALYSIS
DENTURES MARKET
8.1 INTRODUCTION
8.2 MARKET ANALYSIS AND FORECAST
8.2.1 Units Sold
8.2.2 Average Selling Price
8.3 MARKET SEGMENTED BY TYPE
8.3.1 Full Dentures
8.3.2 Partial Dentures
8.4 MARKET FOR FALSE TEETH
8.4.1 Market Analysis and Forecast
8.4.2 Units Sold
8.4.3 Average Selling Price
8.5 MARKET SEGMENTED BY MATERIAL TYPE
8.5.1 Acrylic
8.5.2 Porcelain
8.5.3 Composite Resin
8.6 MARKET DRIVERS
8.6.1 Demographic Factors
8.6.2 Mini-Implants with Dentures
8.6.3 Growth of Corporate Dental Chains
8.7 MARKET LIMITERS
8.7.1 Improvements in Dental Health
8.8 COMPETITIVE ANALYSIS
CAD/CAM SYSTEMS MARKET
9.1 INTRODUCTION
9.2 MARKET FOR IN-LAB CAD/CAMSYSTEMS
9.2.1 Full In-Lab Systems
9.2.1.1 Market Analysis and Forecast
9.2.1.2 Competitive Analysis
9.2.2 Standalone Scanner CAD/CAM Systems
9.2.2.1 Competitive Analysis
9.2.3 In-Lab CAD/CAM Systems Competitive Analysis
9.3 MARKET FOR CHAIRSIDE CAD/CAMSYSTEMS
9.3.1 Market Analysis and Forecast
9.3.2 Competitive Analysis: Chairside Systems
9.4 MARKET DRIVERS
9.4.1 Demand for All-Ceramic Restorations
9.4.2 Shortage of Skilled Labor
9.4.3 Decreasing Prices
9.4.4 Technological Improvements
9.5 MARKET LIMITERS
9.5.1 PFM Restorations
9.5.2 Three-Dimensional Printing Technology
9.5.3 Cost of Investment
9.5.4 Technological Limitations
9.5.5 Economic Downturn
9.6 COMPETITIVE ANALYSIS
9.6.1 Full CAD/CAM Systems
9.6.2 Standalone Scanner CAD/CAM Systems
9.6.3 Chairside CAD/CAM Systems
9.6.4 Overall CAD/CAM Systems
CAD/CAM BLOCKS AND PROSTHETIC DEVICES MARKET
10.1 INTRODUCTION
10.2 MARKET ANALYSIS FOR CAD/CAMBLOCKS
10.2.1 Market Analysis and Forecast
10.2.2 Units Sold
10.2.3 Average Selling Price
10.2.4 Market Segmented by Material Type
10.2.4.1 Zirconia
10.2.4.2 Porcelain
10.2.4.3 Acrylic
10.2.5 Competitive Analysis
10.3 MARKET FOR CAD/CAMPROSTHETICS
10.3.1 Chairside Prosthetic Devices147
10.3.1.1 Market Analysis and Forecast
10.3.1.2 Competitive Analysis: Chairside Prosthetics
10.3.2 In-Lab Prosthetic Devices
10.3.2.1 Market Analysis and Forecast
10.3.2.2 Competitive Analysis: In-Lab Prosthetics
10.3.3 Penetration Rates
10.4 MARKET DRIVERS
10.4.1 Improving Track Record of All-Ceramic Restorations
10.5 MARKET LIMITERS
10.5.1 Initial Investment into CAD/CAM Systems
10.5.2 Adoption of CAD/CAM Technology
DIGITAL IMPRESSION-TAKING SYSTEMS MARKET
11.1 INTRODUCTION
11.2 MARKET ANALYSIS AND FORECAST.
11.2.1 Units Sold
11.2.2 Average Selling Price
11.3 MARKET DRIVERS
11.3.1 Productivity Enhancements
11.3.2 Affordable Alternative
11.4 LIMITERS
11.4.1 Hesitance of Early Majority Practitioners
11.5 COMPETITIVE ANALYSIS
COMPETITORS IN THE MARKET FOR AUTOMATED PROSTHETIC
MANUFACTURING
12.1 INTRODUCTION
12.2 CAD/CAMSYSTEMS
12.2.1 3M ESPE
12.2.2 3Shape A/S
12.2.3 D4D Technologies, LLC
12.2.4 Dental Wings
12.2.5 DENTSPLY International
12.2.6 etkon AG
12.2.7 KaVo Dental Corporation
12.2.8 Nobel Biocare
12.2.9 Noritake Dental Supply
12.2.10 Sirona Dental Systems
12.2.11 Wieland Dental and Technik
12.3 DIGITAL IMPRESSION TAKING SYSTEMS
12.3.1 Cadent
12.3.2 3M ESPE
12.4 RAPID PROTOTYPING SYSTEMS
12.4.1 imagen
12.4.2 3D Systems
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
OVERVIEW OF DENTAL PROSTHETICS
TOTAL MARKET FOR DENTAL PROSTHETICS
Figure 4-1: Market for Dental Prosthetics, U.S., 2005 – 2015
Figure 4-2: Market Shares by Prosthetics Type, U.S., 2005 – 2015
Figure 4-3: Unit Shares by Prosthetics Type, 2005 – 2015
Figure 4-4: Number of Dental Implant Prosthetic Devices, U.S., 2005 – 2015
Figure 4-5: Market Drivers and Limiters for Dental Prosthetics, U.S., 2008
Figure 4-6: Leading Competitors in the Market for Dental Prosthetics, U.S., 2007
CROWNS AND BRIDGES MARKET
Figure 5-1: Market for Crowns and Bridges, U.S., 2005 – 2015
Figure 5-2: Market for Crowns, U.S., 2005 – 2015
Figure 5-3: Market for Bridges, U.S., 2005 – 2015
Figure 5-4: Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
Figure 5-5: Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
Figure 5-6: Market for Full-Cast Crowns and Bridges, U.S., 2005 – 2015
Figure 5-7: Market for All-Ceramic Crowns and Bridges, U.S., 2005 – 2015
Figure 5-8: Market for PFM Non-Precious Alloy Crowns and Bridges, U.S., 2005 – 2015
Figure 5-9: Market for PFM Semi-Precious Alloy Crowns and Bridges, U.S., 2005 – 2015
Figure 5-10: Market for PFM Precious Alloy Crowns and Bridges, U.S., 2005 – 2015
Figure 5-11: Market Drivers and Limiters, Crowns and Bridges, U.S., 2008
Figure 5-12: Leading Competitors in the Market for Crowns and Bridges, U.S., 2008
INLAYS & ONLAYS MARKET
Figure 6-1 – Market for Inlays and Onlays, U.S., 2005 – 2015
Figure 6-2: Market for Inlays and Onlays Segmented by Type, U.S., 2005 – 2015
Figure 6-3 Inlays and Onlays Segmented by Material Type, U.S., 2005 – 2015
Figure 6-4 Leading Competitors in the Market for Inlays/Onlays, U.S., 2008
VENEERS MARKET
Figure 7-1: Market for Veneers, U.S., 2005 – 2015
Figure 7-2 – Market for Veneers Segmented by Type, U.S., 2005 – 2015
Figure 7-3 – Veneers Unit Share by Material Type, U.S., 2005 – 2015
Figure 7-4 – Market Drivers and Limiters, Veneers, U.S., 2008
Figure 7-5 Leading Competitors in the Market for Veneers, U.S., 2008
DENTURES MARKET
Figure 8-1: Market for Dentures, U.S., 2005 – 2015
Figure 8-2: Dentures Segmented by Type, U.S., 2005 – 2015
Figure 8-3: Market for Dentures Segmented by Type, U.S., 2005 – 2015
Figure 8-4: Market for Denture False Teeth, U.S., 2005 – 2015
Figure 8-5 Market for Denture False Teeth Segmented by Type, U.S., 2005 – 2015
Figure 8-6 Denture False Teeth Segmented by Material Type, U.S., 2005 – 2015
Figure 8-7 – Market Drivers and Limiters, Dentures, U.S., 2008
Figure 8-8: Leading Competitors in the Market for Dental Prosthetics, U.S., 2008
Figure 8-9: Leading Competitors in the Market for False Teeth, U.S., 2008 105 CAD/CAM SYSTEMS MARKET
Figure 9-1: Market for Full In-Lab CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-2: Number of Full In-Lab CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-3: Leading Competitors, Full In-Lab CAD/CAM Systems, U.S., 2008
Figure 9-4: Market for Standalone Scanner In-Lab CAD/CAM systems, U.S., 2005 – 2015
Figure 9-5: Number of Standalone Scanner CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-6: Leading Competitors, Standalone Scanner CAD/CAM Systems, U.S., 2008
Figure 9-7: Total Market Share of In-Lab CAD/CAM Systems, U.S., 2008
Figure 9-8: Market for Chairside CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-9: Number of Chairside CAD/CAM Systems, U.S., 2005 – 2015
Figure 9-10: Share of Chairside CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Figure 9-11: Share of Total Chairside CAD/CAM Systems Sold, U.S., 2005 – 2015
Figure 9-12: Market Drivers and Limiters, CAD/CAM, U.S., 2008
Figure 9-13: Total Market Share of CAD/CAM Systems, U.S., 2008
CAD/CAM BLOCKS AND PROSTHETIC DEVICES MARKET
Figure 10-1: Market for CAD/CAM Blocks, U.S., 2005 – 2015
Figure 10-2: Market for CAD/CAM Blocks Segmented by Type, U.S., 2005 – 2015
Figure 10-3: Leading Competitors, CAD/CAM Blocks, U.S., 2008
Figure 10-4: Market for Chairside CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Figure 10-5: Leading Competitors, CAD/CAM Prosthetic Devices, U.S., 2008
Figure 10-6 – Market for In-Lab CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Figure 10-7: Leading Competitors, In-Lab CAD/CAM Prosthetic Devices, U.S., 2008
Figure 10-8: Percentage of Prosthetic Devices Fabricated with CAD/CAM Technology vs. Conventional Methods, U.S., 2005 – 2015
DIGITAL IMPRESSION-TAKING SYSTEMS
Figure 11-1: Market for Digital Impression Taking Systems, U.S., 2005 – 2015
Figure 11-2: Number of Digital Impression Taking Systems, U.S., 2005 – 2015
Figure 11-3: Market Drivers and Limiters, Digital Impression Taking Systems, U.S., 2008
Figure 11-4: Leading Competitors, Digital Impression Taking Systems, U.S., 2008
COMPETITORS IN THE MARKET FOR AUTOMATED PROSTHETIC
MANUFACTURING
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Market for Dental Prosthetics, U.S., 2005 – 2015
Chart 1-2: Dental Prosthetics Unit Share by Type, U.S., 2005 – 2015
Chart 1-3: Market for Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
Chart 1-4: Market for Inlays and Onlays Segmented by Material Type, U.S., 2005 – 2015
Chart 1-5: Market for Veneers, U.S., 2005 – 2015
Chart 1-6: Dentures Unit Share by Type, U.S., 2005 – 2015
Chart 1-7: Percentage of Prosthetic Devices Fabricated with CAD/CAM Technology vs. Conventional Methods, U.S., 2005 – 2015
Chart 1-8: Market for Digital Impression Taking Systems, U.S., 2005 – 2015
Chart 1-9: Market Share for In-Lab CAD/CAM Systems, U.S., 2008
RESEARCH METHODOLOGY
OVERVIEW OF DENTAL PROSTHETICS
Chart 3-1: Prevalence of Coronal Caries Among Dentate Adults in the U.S.
Chart 3-2: Mean Number of Teeth Among Dentate Adults in the U.S.
Chart 3-3: Prevalence of Edentulism Among Dentate Adults in the U.S.
TOTAL MARKET FOR DENTAL PROSTHETICS
Chart 4-1: Dental Prosthetics Market Value, U.S., 2005 – 2015
Chart 4-2: Market Shares by Prosthetics Type, U.S., 2008
Chart 4-3: Market Shares by Prosthetics Type, U.S., 2005 – 2015
Chart 4-4: Unit Shares by Prosthetics Type, U.S., 2008
Chart 4-5: Unit Shares by Prosthetics Type, U.S., 2005 – 2015
Chart 4-6: Implant Prosthetics Unit Shares, U.S., 2005 – 2015
Chart 4-7: Leading Competitors in the Market for Dental Prosthetics, U.S., 2008
CROWNS AND BRIDGES MARKET
Chart 5-1: Crowns and Bridges Market Value, U.S., 2005 – 2015
Chart 5-2: Number of Crown Units Sold, U.S., 2005 – 2015
Chart 5-3: Average Selling Price per Crown Unit, U.S., 2005 – 2015
Chart 5-4: Number of Units of Bridges Sold, U.S., 2005 – 2015
Chart 5-5: Average Selling Price per Bridge Unit, U.S., 2005 – 2015
Chart 5-6: Crowns and Bridges Units Segmented by Material Type, U.S., 2008
Chart 5-7: Crowns and Bridges Segmented by Material Type, U.S., 2005 – 2015
INLAYS AND ONLAYS MARKET
Chart 6-1: Market and Growth Rates for Inlays and Onlays, U.S., 2005 – 2015
Chart 6-2: Number of Inlay and Onlay Units Sold, U.S., 2005 – 2015
Chart 6-3: Average Selling Price per Inlay and Onlay Unit, U.S., 2005 – 2015
Chart 6-4: Inlays and Onlays Market Segmented by Material Type, U.S., 2005 – 2015
VENEERS MARKET
Chart 7-1: Veneer Units Segmented by Material Type, U.S., 2008
Chart 7-2: Number of Veneer Units Sold, U.S., 2005 – 2015
Chart 7-3: Average Selling Price per Veneer Unit, U.S., 2005 – 2015
DENTURES MARKET
Chart 8-1: Denture Units Segmented by Type, U.S., 2008
Chart 8-2: Number of Denture Units Sold, U.S., 2005 – 2015
Chart 8-3: Average Selling Price per Denture Unit, U.S., 2005 – 2015
Chart 8-4 Market and Growth Raters for Denture False Teeth, U.S., 2005 - 2015
DENTAL CAD/CAM SYSTEMS MARKET
Chart 9-1: Market for Full In-Lab CAD/CAM Systems, U.S., 2005 – 2015
Chart 9-2: Number of Full In-Lab CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-3: Total Number of Full In-Lab CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-4: Leading Competitors, Full In-Lab CAD/CAM System Units, U.S., 2008
Chart 9-5: Market Value for Standalone Scanner CAD/CAM Systems, U.S., 2005= –2015
Chart 9-6: Number of Standalone Scanner CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-7: Total Number of Standalone Scanner CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-8: Leading Competitors, Standalone Scanner CAD/CAM Systems, U.S., 2008
Chart 9-9: Total Market Share of In-Lab CAD/CAM Systems, U.S., 2008
Chart 9-10: Market Value, Chairside CAD/CAM Systems, U.S., 2005 – 2015
Chart 9-11: Number of Chairside CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-12: Total Number of Chairside CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-13: Percent of Chairside CAD/CAM Systems Sold Annually, U.S., 2005 – 2015
Chart 9-14: Percentage of Total Chairside CAD/CAM Systems Sold, U.S., 2005 – 2015
Chart 9-15: Total Market Share of CAD/CAM System, U.S., 2008
CAD/CAM BLOCKS AND PROSTHETIC DEVICES MARKET
Chart 10-1: Number of CAD/CAM Blocks Sold, U.S., 2005 – 2015
Chart 10-2: Average Selling Price per CAD/CAM Block, U.S., 2005 – 2015
Chart 10-3: CAD/CAM Blocks Segmented by Type, U.S., 2005 – 2015
Chart 10-4: Market for Chairside CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Chart 10-5: Market for In-Lab CAD/CAM Prosthetic Devices, U.S., 2005 – 2015
Chart 10-6: Leading Competitors, In-Lab CAD/CAM Prosthetic Devices, U.S., 2008
Chart 10-7: Percentage of Prosthetic Devices Fabricated with CAD/CAM Technology vs. Conventional Methods, U.S., 2005 – 2015 156 Digital Impression-Taking Systems Market
Chart 11-1: Number of Digital Impression Taking Systems Sold, U.S., 2005 – 2015
Chart 11-2 Average Selling Price per Digital Impression Taking System, U.S., 2005 – 2015
COMPETITORS IN THE MARKET FOR AUTOMATED PROSTHETIC
MANUFACTURING