U.K. Market for Dental Prosthetics and CAD/CAM Devices 2011

March 2011 | 87 pages | ID: UA873B0CA8CEN
iData Research Inc.

Abstracts

The U.K. market for dental prosthetics was the third largest dental prosthetics market in Europe in 2010. As a result of the growing number of private practices in the U.K. and the high cost of dental procedures, patients are engaging in dental tourism to countries that offer dental services and restorations at lower costs. The dental prosthetics market in the U.K. experienced an overall slow down due to NHS policy changes in reimbursement for dental prosthetics.

This report also includes the following market segments:

• Crown and Bridge Market
• Denture Market
• CAD/CAM System Market
• CAD/CAM Block and Prosthetic Market

The aging population and demand for superior dental aesthetics are driving the prosthetics market. The global economic recession of 2008 and 2009 resulted in a slowdown in total market growth; however, the market began to recover in 2010 and is expected to experience accelerating growth by 2017. CAD/CAM manufactured prosthetics are expected to represent the fastest growing segment while the CAD/CAM system market will exhibit high unit growth rates over the forecast period.

This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

Contents

TABLE OF CONTENTS
LIST OF FIGURES
LIST OF CHARTS

1. EXECUTIVE SUMMARY

1.1 TOTAL EUROPEAN DENTAL PROSTHETICS MARKETS
1.2 CAD/CAM PROSTHETICS MARKETS
1.3 DENTAL STATISTICS
1.4 TREND ANALYSIS BY COUNTRY
1.5 TREND ANALYSIS BY SEGMENT
1.6 CROWN AND BRIDGE MARKET
1.7 DENTURE MARKET
1.8 CAD/CAM SYSTEM MARKET
1.9 FULL IN-LAB CAD/CAMSYSTEMS
1.10 STANDALONE SCANNER MARKET
1.11 CHAIRSIDE SYSTEM MARKET
1.12 COMPETITIVE ANALYSIS

2. RESEARCH METHODOLOGY

2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring

3. U.K. MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS

3.1 INTRODUCTION
3.2 MARKET ANALYSIS AND FORECAST
  3.2.1 Total Dental Prosthetics Market
  3.2.2 Crown and Bridge Market
    3.2.2.1 Porcelain-Fused Metal Market
    3.2.2.2 Full-Cast Market
    3.2.2.3 All-Ceramic Market
  3.2.3 CAD/CAM Prosthetics Market
    3.2.3.1 Chairside CAD/CAM Prosthetics Market
    3.2.3.2 In-Lab CAD/CAM Prosthetics Market
  3.2.4 Denture Market
    3.2.4.1 Full Denture Market
    3.2.4.2 Partial Denture Market
  3.2.5 CAD/CAM System Market
    3.2.5.1 Full In-Lab CAD/CAM System Market
    3.2.5.2 Standalone Scanner Market
    3.2.5.3 Chairside System Market
3.3 MARKET DRIVERS AND LIMITERS
  3.3.1 Total Dental Prosthetics Market
    3.3.1.1 Market Drivers
    3.3.1.2 Market Limiters
  3.3.2 Crown and Bridge Market
    3.3.2.1 Market Drivers
    3.3.2.2 Market Limiters
  3.3.3 Denture Market
    3.3.3.1 Market Drivers
    3.3.3.2 Market Limiters
  3.3.4 CAD/CAM System Market
    3.3.4.1 Market Drivers
    3.3.4.2 Market Limiters
Technological Limitations
3.4 COMPETITIVE ANALYSIS
  3.4.1 CAD/CAM Systems
    3.4.1.1 Full In-Lab Systems
    3.4.1.2 Standalone Scanners
    3.4.1.3 Chairside Systems

ABBREVIATIONS

List Of Figures

LIST OF FIGURES

EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
U.K. MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 3-1: Dental Prosthetics Market, U.K., 2007 – 2017 (€)
Figure 3-2: Dental Prosthetics Market, U.K., 2007 – 2017 (US$)
Figure 3-3: Crown and Bridge Market, U.K., 2007 – 2017 (€)
Figure 3-4: Crown and Bridge Market, U.K., 2007 – 2017 (US$)
Figure 3-5: Crown and Bridge Units by Material Type, U.K., 2007 – 2017
Figure 3-6: Porcelain-Fused Metal Device Market, U.K., 2007 – 2017 (€)
Figure 3-7: Porcelain-Fused Metal Device Market, U.K., 2007 – 2017 (US$)
Figure 3-8: Full-Cast Device Market, U.K., 2007 – 2017 (€)
Figure 3-9: Full-Cast Device Market, U.K., 2007 – 2017 (US$)
Figure 3-10 All-Ceramic Device Market, U.K., 2007 – 2017 (€)
Figure 3-11: All-Ceramic Device Market, U.K., 2007 – 2017 (US$)
Figure 3-12 CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (€)
Figure 3-13: CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (US$)
Figure 3-14: Chairside CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (€)
Figure 3-15: Chairside CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (US$)
Figure 3-16: In-Lab CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (€)
Figure 3-17: In-Lab CAD/CAM Prosthetics Market, U.K., 2007 – 2017 (US$)
Figure 3-18: Denture Units by Type, U.K., 2007 – 2017
Figure 3-19: Denture Market, U.K., 2007 – 2017 (€)
Figure 3-20: Denture Market, U.K., 2007 – 2017 (US$)
Figure 3-21: Denture Market Segmented by Type, U.K., 2007 – 2017
Figure 3-22: CAD/CAM System Market, U.K., 2007 – 2017 (€, US$)
Figure 3-23: Full In-Lab CAD/CAM System Market, U.K., 2007 – 2017 (€)
Figure 3-24: Full In-Lab CAD/CAM System Market, U.K., 2007 – 2017 (US$)
Figure 3-25: Standalone Scannner Market, U.K., 2007 – 2017 (€)
Figure 3-26: Standalone Scanner Market, U.K., 2007 – 2017 (US$)
Figure 3-27: Chairside System Market, U.K., 2007 – 2017 (€)
Figure 3-28: Chairside System Market, U.K., 2007 – 2017 (US$)
Figure 3-29: Market Drivers and Limiters, Dental Prosthetics Market, U.K., 2010
Figure 3-30: Market Drivers and Limiters, Crown and Bridge Market, U.K., 2010
Figure 3-31: Market Drivers and Limiters, Denture Market, U.K., 2010
Figure 3-32: Market Drivers and Limiters, CAD/CAM Systems Market, U.K., 2010
Figure 3-33: Leading Competitors, CAD/CAM System Market, U.K., 2010
Figure 3-34: Leading Competitors, Full In-Lab CAD/CAM System Market, U.K., 2010
Figure 3-35: Leading Competitors, Standalone Scanner System Market, U.K., 2010
ABBREVIATIONS

LIST OF CHART'S

EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market, Europe, 2007 – 2017 (€M)
Chart 1-2: Percentage of Prosthetics Fabricated by CAD/CAM Technology versus Conventional Methods, Europe, 2007 – 2017
Chart 1-3: Population per Dentist by Country, Europe, 2010
Chart 1-4: Dental Prosthetics Market by Country, Europe, 2010
Chart 1-5: Growth Rates by Segment, Full-Cast Crown and Bridge Market, Europe, 2007 – 2017
Chart 1-6: Crown and Bridge Market, Europe, 2007 – 2017 (€M)
Chart 1-7: Growth Rates by Segment, Denture Market, Europe, 2007 – 2017
Chart 1-8: CAD/CAM System Market, Europe, 2007 – 2017 (€M)
Chart 1-9: Full In-Lab CAD/CAM System Market, Europe, 2007 – 2017 (€M)
Chart 1-10: Standalone Scanners Installed Base, Europe, 2007 – 2017
Chart 1-11: Chairside CAD/CAM system Installed Base, Europe, 2007 – 2017
Chart 1-12: Leading Competitors, CAD/CAM System Market, Europe, 2010
RESEARCH METHODOLOGY
U.K. MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 3-1: Dental Prosthetics Market, U.K., 2007 – 2017 (€M)
Chart 3-2: Crown and Bridge Market, U.K., 2007 – 2017 (€M)
Chart 3-3: Crowns and Bridge Units by Material Type, U.K., 2010
Chart 3-4: Crown and Bridge Units by Material Type, U.K., 2017
Chart 3-5: Crown and Bridge Units by Material Type, U.K., 2007 – 2017
Chart 3-6: Denture Market, U.K., 2007 – 2017 (€M)
Chart 3-7: CAD/CAM System Market, U.K., 2007 – 2017 (€M)
Chart 3-8: Full In-Lab CAD/CAM System Market, U.K., 2007 – 2017 (€M)
Chart 3-9: Standalone Scanner Market, U.K., 2007 – 2017 (€M)
Chart 3-10: Chairside Systems Market, U.K., 2007 – 2017 (€M)
Chart 3-11: Leading Competitors, CAD/CAM System Market, U.K., 2010
Chart 3-12: Leading Competitors, Full In-Lab CAD/CAM System Market, U.K., 2010
Chart 3-13: Leading Competitors, Standalone Scanner System Market, U.K., 2010
ABBREVIATIONS