Italian market for Dental Prosthetics and CAD/CAM Devices 2011
The Italian market for dental prosthetics was the second largest market in Europe in 2010. Italy had the fourth largest population in the European Union, with 60.1 million people. The Italian oral healthcare system depends on local priorities, and thus varies greatly from township to township. There are two components of the Italian dental care system. In the case of surgery or a similar intervention, hospital care is free of charge. Dental prosthetics, however, are mostly placed by private dental practice. In Italy, the dental patient population is very heavily driven by the aesthetics of dental restorations and all-ceramics are especially popular.
This report also includes the following market segments:
This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.
This report also includes the following market segments:
- Crown and Bridge Market
- Denture Market
- CAD/CAM System Market
- CAD/CAM Block and Prosthetic Market
This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.
TABLE OF CONTENTS
LIST OF FIGURES
LIST OF CHARTS
1. EXECUTIVE SUMMARY
1.1 TOTAL EUROPEAN DENTAL PROSTHETICS MARKETS
1.2 CAD/CAM PROSTHETICS MARKETS
1.3 DENTAL STATISTICS
1.4 TREND ANALYSIS BY COUNTRY
1.5 TREND ANALYSIS BY SEGMENT
1.6 CROWN AND BRIDGE MARKET
1.7 DENTURE MARKET
1.8 CAD/CAM SYSTEM MARKET
1.9 FULL IN-LAB CAD/CAMSYSTEMS
1.10 STANDALONE SCANNER MARKET
1.11 CHAIRSIDE SYSTEM MARKET
1.12 COMPETITIVE ANALYSIS
2. RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
3. ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
3.1 INTRODUCTION
3.2 MARKET ANALYSIS AND FORECAST
3.2.1 Total Dental Prosthetics Market
3.2.2 Crown and Bridge Market
3.2.2.1 Porcelain-Fused Metal Market
3.2.2.2 Full-Cast Market
3.2.2.3 All-Ceramic Device Market
3.2.3 CAD/CAM Prosthetics Market
3.2.3.1 Chairside CAD/CAM Prosthetics
3.2.3.2 In-Lab CAD/CAM Prosthetics
3.2.4 Denture Market
3.2.4.1 Full Denture Market
3.2.4.2 Partial Denture Market
3.2.5 CAD/CAM System Market
3.2.5.1 Full In-Lab CAD/CAM Systems
3.2.5.2 Standalone Scanner CAD/CAM Systems
3.2.5.3 Chairside Systems
3.3 MARKET DRIVERS AND LIMITERS
3.3.1 Total Dental Prosthetics Market
3.3.1.1 Market Drivers
3.3.1.2 Market Limiters
3.3.2 Crown and Bridge Market
3.3.2.1 Market Drivers
3.3.2.2 Market Limiters
3.3.3 Denture Market
3.3.3.1 Market Drivers
3.3.3.2 Market Limiters
3.3.4 CAD/CAM System Market
3.3.4.1 Market Drivers
3.3.4.2 Market Limiters
3.4 COMPETITIVE ANALYSIS
3.4.1 CAD/CAM Systems
3.4.1.1 Full In-Lab Systems
3.4.1.2 Standalone Scanners
3.4.1.3 Chairside Systems
ABBREVIATIONS
LIST OF FIGURES
LIST OF CHARTS
1. EXECUTIVE SUMMARY
1.1 TOTAL EUROPEAN DENTAL PROSTHETICS MARKETS
1.2 CAD/CAM PROSTHETICS MARKETS
1.3 DENTAL STATISTICS
1.4 TREND ANALYSIS BY COUNTRY
1.5 TREND ANALYSIS BY SEGMENT
1.6 CROWN AND BRIDGE MARKET
1.7 DENTURE MARKET
1.8 CAD/CAM SYSTEM MARKET
1.9 FULL IN-LAB CAD/CAMSYSTEMS
1.10 STANDALONE SCANNER MARKET
1.11 CHAIRSIDE SYSTEM MARKET
1.12 COMPETITIVE ANALYSIS
2. RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
3. ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
3.1 INTRODUCTION
3.2 MARKET ANALYSIS AND FORECAST
3.2.1 Total Dental Prosthetics Market
3.2.2 Crown and Bridge Market
3.2.2.1 Porcelain-Fused Metal Market
3.2.2.2 Full-Cast Market
3.2.2.3 All-Ceramic Device Market
3.2.3 CAD/CAM Prosthetics Market
3.2.3.1 Chairside CAD/CAM Prosthetics
3.2.3.2 In-Lab CAD/CAM Prosthetics
3.2.4 Denture Market
3.2.4.1 Full Denture Market
3.2.4.2 Partial Denture Market
3.2.5 CAD/CAM System Market
3.2.5.1 Full In-Lab CAD/CAM Systems
3.2.5.2 Standalone Scanner CAD/CAM Systems
3.2.5.3 Chairside Systems
3.3 MARKET DRIVERS AND LIMITERS
3.3.1 Total Dental Prosthetics Market
3.3.1.1 Market Drivers
3.3.1.2 Market Limiters
3.3.2 Crown and Bridge Market
3.3.2.1 Market Drivers
3.3.2.2 Market Limiters
3.3.3 Denture Market
3.3.3.1 Market Drivers
3.3.3.2 Market Limiters
3.3.4 CAD/CAM System Market
3.3.4.1 Market Drivers
3.3.4.2 Market Limiters
3.4 COMPETITIVE ANALYSIS
3.4.1 CAD/CAM Systems
3.4.1.1 Full In-Lab Systems
3.4.1.2 Standalone Scanners
3.4.1.3 Chairside Systems
ABBREVIATIONS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 8-1: Total Dental Prosthetics Market, Italy, 2007 – 2017 (€)
Figure 8-2: Total Dental Prosthetics Market, Italy, 2007 – 2017 (US$)
Figure 8-3: Crown and Bridge Market, Italy, 2007 – 2017 (€)
Figure 8-4: Crown and Bridge Market, Italy, 2007 – 2017 (US$)
Figure 8-5: Crown and Bridge Units by Material Type, Italy, 2007 – 2017
Figure 8-6: Porcelain-Fused Metal Device Market, Italy, 2007 – 2017 (€)
Figure 8-7: Porcelain-Fused Metal Device Market, Italy, 2007 – 2017 (US$)
Figure 8-8: Full-Cast Device Market, Italy, 2007 – 2017 (€)
Figure 8-9: Full-Cast Device Market, Italy, 2007 – 2017 (US$)
Figure 8-10: All-Ceramic Device Market, Italy, 2007 – 2017 (€)
Figure 8-11: All-Ceramic Device Market, Italy, 2007 – 2017 (US$)
Figure 8-12: CAD/CAM Prosthetics Market, Italy, 2007–2017 (€)
Figure 8-13: CAD/CAM Prosthetics Market, Italy, 2007–2017 (US$)
Figure 8-14: Chairside CAD/CAM Prosthetics Market, Italy, 2007–2017 (€)
Figure 8-15: Chairside CAD/CAM Prosthetics Market, Italy, 2007–2017 (US$)
Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Italy, 2007–2017 (€)
Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Italy, 2007-2017 (US$)
Figure 8-18: Denture Market by Type, Italy, 2007 – 2017
Figure 8-19: Denture Market, Italy, 2007 – 2017 (€)
Figure 8-20: Denture Market, Italy, 2007 – 2017 (US$)
Figure 8-21: Denture Market Segmented by Type, Italy, 2007– 2017
Figure 8-22: CAD/CAM System Market, Italy, 2007 – 2017 (€ and US$)
Figure 8-23: Full In-Lab CAD/CAM System Market, Italy, 2007 – 2017 (€)
Figure 8-24: Full In-Lab CAD/CAM System Market, Italy, 2007 – 2017 (US$)
Figure 8-25: Standalone Scanner CAD/CAM Systems Market, Italy, 2007 – 2017 (€)
Figure 8-26: Standalone Scanner CAD/CAM Systems Market, Italy, 2007 – 2017 (US$)
Figure 8-27: Chairside CAD/CAM System Market, Italy, 2007 – 2017 (€)
Figure 8-28: Chairside CAD/CAM System Market, Italy, 2007 – 2017 (US$)
Figure 8-29: Market Drivers and Limiters, Dental Prosthetics Market, Italy, 201067
Figure 8-30: Market Drivers and Limiters, Crown and Bridge Market, Italy, 201070
Figure 8-31: Market Drivers and Limiters, Denture Market, Italy, 2010
Figure 8-32: Market Drivers and Limiters, CAD/CAM Systems Market, 2010
Figure 8-33: Leading Competitors, CAD/CAM System Market, Italy, 2010
Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market, Italy, 2010
Figure 8-35: Leading Competitors, Standalone Scanner Systems Market, Italy, 2010
ABBREVIATIONS
LIST OF CHART'S
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market, Europe, 2007 – 2017 (€M)
Chart 1-2: Percentage of Prosthetics Fabricated by CAD/CAM Technology versus Conventional Methods, Europe, 2007 – 2017
Chart 1-3: Population per Dentist by Country, Europe, 2010
Chart 1-4: Dental Prosthetics Market by Country, Europe, 2010
Chart 1-5: Growth Rates by Segment, Full-Cast Crown and Bridge Market, Europe, 2007 – 2017
Chart 1-6: Crown and Bridge Market, Europe, 2007 – 2017 (€M)
Chart 1-7: Growth Rates by Segment, Denture Market, Europe, 2007 – 2017
Chart 1-8: CAD/CAM System Market, Europe, 2007 – 2017 (€M)
Chart 1-9: Full In-Lab CAD/CAM System Market, Europe, 2007 – 2017 (€M)
Chart 1-10: Standalone Scanners Installed Base, Europe, 2007 – 2017
Chart 1-11: Chairside CAD/CAM system Installed Base, Europe, 2007 – 2017
Chart 1-12: Leading Competitors, CAD/CAM System Market, Europe, 2010
RESEARCH METHODOLOGY
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 8-1: Dental Prosthetics Market, Italy, 2007 – 2017 (€M)
Chart 8-2: Crown and Bridge Market, Italy, 2007 – 2017 (€M)
Chart 8-3: Crown Bridge Units by Material Type, Italy, 2010
Chart 8-4: Crowns and Bridge Units by Material Type, Italy, 2017
Chart 8-5: Crown and Bridge Unit Share by Material Type, Italy, 2007 – 2017
Chart 8-6: CAD/CAM Prosthetics Market, Italy, 2007–2017 (€M)
Chart 8-7: Dentures Market Italy, 2007 – 2017 (€M)
Chart 8-8: CAD/CAM System Market, Italy, 2007 – 2017 (€M)
Chart 8-9: Full In-Lab CAD/CAM System Market, Italy, 2007 – 2017 (€M)
Chart 8-10: Standalone Scanner CAD/CAM Systems Market, Italy, 2007 – 2017 (€M)
Chart 8-11: Chairside CAD/CAM System Market, Italy, 2007 – 2017 (€M)
Chart 8-12: Leading Competitors, CAD/CAM Systems Market, Italy, 2010
Chart 8-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Italy, 2010
Chart 8-14: Leading Competitors, Standalone Scanner Systems Market, Italy, 2010
ABBREVIATIONS
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 8-1: Total Dental Prosthetics Market, Italy, 2007 – 2017 (€)
Figure 8-2: Total Dental Prosthetics Market, Italy, 2007 – 2017 (US$)
Figure 8-3: Crown and Bridge Market, Italy, 2007 – 2017 (€)
Figure 8-4: Crown and Bridge Market, Italy, 2007 – 2017 (US$)
Figure 8-5: Crown and Bridge Units by Material Type, Italy, 2007 – 2017
Figure 8-6: Porcelain-Fused Metal Device Market, Italy, 2007 – 2017 (€)
Figure 8-7: Porcelain-Fused Metal Device Market, Italy, 2007 – 2017 (US$)
Figure 8-8: Full-Cast Device Market, Italy, 2007 – 2017 (€)
Figure 8-9: Full-Cast Device Market, Italy, 2007 – 2017 (US$)
Figure 8-10: All-Ceramic Device Market, Italy, 2007 – 2017 (€)
Figure 8-11: All-Ceramic Device Market, Italy, 2007 – 2017 (US$)
Figure 8-12: CAD/CAM Prosthetics Market, Italy, 2007–2017 (€)
Figure 8-13: CAD/CAM Prosthetics Market, Italy, 2007–2017 (US$)
Figure 8-14: Chairside CAD/CAM Prosthetics Market, Italy, 2007–2017 (€)
Figure 8-15: Chairside CAD/CAM Prosthetics Market, Italy, 2007–2017 (US$)
Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Italy, 2007–2017 (€)
Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Italy, 2007-2017 (US$)
Figure 8-18: Denture Market by Type, Italy, 2007 – 2017
Figure 8-19: Denture Market, Italy, 2007 – 2017 (€)
Figure 8-20: Denture Market, Italy, 2007 – 2017 (US$)
Figure 8-21: Denture Market Segmented by Type, Italy, 2007– 2017
Figure 8-22: CAD/CAM System Market, Italy, 2007 – 2017 (€ and US$)
Figure 8-23: Full In-Lab CAD/CAM System Market, Italy, 2007 – 2017 (€)
Figure 8-24: Full In-Lab CAD/CAM System Market, Italy, 2007 – 2017 (US$)
Figure 8-25: Standalone Scanner CAD/CAM Systems Market, Italy, 2007 – 2017 (€)
Figure 8-26: Standalone Scanner CAD/CAM Systems Market, Italy, 2007 – 2017 (US$)
Figure 8-27: Chairside CAD/CAM System Market, Italy, 2007 – 2017 (€)
Figure 8-28: Chairside CAD/CAM System Market, Italy, 2007 – 2017 (US$)
Figure 8-29: Market Drivers and Limiters, Dental Prosthetics Market, Italy, 201067
Figure 8-30: Market Drivers and Limiters, Crown and Bridge Market, Italy, 201070
Figure 8-31: Market Drivers and Limiters, Denture Market, Italy, 2010
Figure 8-32: Market Drivers and Limiters, CAD/CAM Systems Market, 2010
Figure 8-33: Leading Competitors, CAD/CAM System Market, Italy, 2010
Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market, Italy, 2010
Figure 8-35: Leading Competitors, Standalone Scanner Systems Market, Italy, 2010
ABBREVIATIONS
LIST OF CHART'S
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market, Europe, 2007 – 2017 (€M)
Chart 1-2: Percentage of Prosthetics Fabricated by CAD/CAM Technology versus Conventional Methods, Europe, 2007 – 2017
Chart 1-3: Population per Dentist by Country, Europe, 2010
Chart 1-4: Dental Prosthetics Market by Country, Europe, 2010
Chart 1-5: Growth Rates by Segment, Full-Cast Crown and Bridge Market, Europe, 2007 – 2017
Chart 1-6: Crown and Bridge Market, Europe, 2007 – 2017 (€M)
Chart 1-7: Growth Rates by Segment, Denture Market, Europe, 2007 – 2017
Chart 1-8: CAD/CAM System Market, Europe, 2007 – 2017 (€M)
Chart 1-9: Full In-Lab CAD/CAM System Market, Europe, 2007 – 2017 (€M)
Chart 1-10: Standalone Scanners Installed Base, Europe, 2007 – 2017
Chart 1-11: Chairside CAD/CAM system Installed Base, Europe, 2007 – 2017
Chart 1-12: Leading Competitors, CAD/CAM System Market, Europe, 2010
RESEARCH METHODOLOGY
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 8-1: Dental Prosthetics Market, Italy, 2007 – 2017 (€M)
Chart 8-2: Crown and Bridge Market, Italy, 2007 – 2017 (€M)
Chart 8-3: Crown Bridge Units by Material Type, Italy, 2010
Chart 8-4: Crowns and Bridge Units by Material Type, Italy, 2017
Chart 8-5: Crown and Bridge Unit Share by Material Type, Italy, 2007 – 2017
Chart 8-6: CAD/CAM Prosthetics Market, Italy, 2007–2017 (€M)
Chart 8-7: Dentures Market Italy, 2007 – 2017 (€M)
Chart 8-8: CAD/CAM System Market, Italy, 2007 – 2017 (€M)
Chart 8-9: Full In-Lab CAD/CAM System Market, Italy, 2007 – 2017 (€M)
Chart 8-10: Standalone Scanner CAD/CAM Systems Market, Italy, 2007 – 2017 (€M)
Chart 8-11: Chairside CAD/CAM System Market, Italy, 2007 – 2017 (€M)
Chart 8-12: Leading Competitors, CAD/CAM Systems Market, Italy, 2010
Chart 8-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Italy, 2010
Chart 8-14: Leading Competitors, Standalone Scanner Systems Market, Italy, 2010
ABBREVIATIONS