European Markets for Dental Prosthetics and CAD/CAM 2009 (16 Countries)
In 2008, the European market for dental prosthetics (crowns, bridges, and dentures) was valued at nearly €8.3 billion. The European market includes Austria, Benelux, France, Germany, Italy, Portugal, Russia, Scandinavia, Spain, Switzerland and the United Kingdom. The global economic downturn in 2008 – 2009 is expected to slow the market growth rate however; the aging population will continue to drive the number of patients requiring dental restorations in the future.
LIST OF FIGURES
LIST OF CHARTS
EXECUTIVE SUMMARY
1.1 OVERVIEW: EUROPEAN AND RUSSIAN FEDERATION MARKETS FOR DENTAL PROSTHETICS
1.2 TREND ANALYSIS BY COUNTRY
1.3 TREND ANALYSIS BY SEGMENT
1.4 MARKET FOR CROWNS AND BRIDGES
1.5 MARKET FOR DENTURES
1.6 CAD/CAM MARKET
1.7 COMPETITIVE ANALYSIS
1.7.1 Leading Dental CAD/CAM Competitors
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
2.2.1 Step 1: Project Initiation & Team Selection
2.2.2 Step 2: Prepare Data Systems and Perform Secondary Research
2.2.3 Step 3: Preparation for Interviews & Questionnaire Design
2.2.4 Step 4: Performing Primary Research
2.2.5 Step 5: Research Analysis: Establishing Baseline Estimates
2.2.6 Step 6: Market Forecast and Analysis
2.2.7 Step 7: Identify Strategic Opportunities
2.2.8 Step 8: Final Review and Market Release
2.2.9 Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 STATISTICS ON DENTAL HEALTH IN EUROPE AND THE RUSSIAN FEDERATION
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.3 Material Types
3.3 INLAYS AND ONLAYS
3.3.1 Material Types
3.4 DENTURES
3.4.1 Full Dentures
3.4.2 Partial Dentures
3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.5.1 Conventional Fabrication
3.5.2 CAD/CAM Technology
3.5.3 Three-Dimensional Printing
3.5.4 Digital Impression-Taking
EUROPEAN AND RUSSIAN FEDERATION MARKET FOR DENTAL PROSTHETICS
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET ANALYSIS AND FORECAST
4.4 MARKET BY SEGMENT
4.4.1 Market for Crowns and Bridges
4.4.2 Market for Dentures
4.4.3 Market for CAD/CAM Systems
4.4.4 Chairside Systems
4.4.5 Competitive Analysis
4.5 MERGERS AND ACQUISITIONS
4.5.1 3M Acquired Brontes Technologies Inc
4.5.2 Straumann Acquired Etkon AG
4.6 MARKET HIGHLIGHTS
4.6.1 Nobel Biocare’s Acquisition of BioCAD and Alliance with Optimet
4.6.2 Wieland’s Introduction of ZENOTEC T1 Milling System
4.6.3 Sirona Releases Own Digital Impression Taking System – CEREC Bluecam
4.6.4 3M Lava Chairside Oral Scanner (C.O.S.)
COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 Median Age
5.1.3 GDP Per Capita
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
5.1.5 Price Index
5.2 EUROPEAN DENTAL PROSTHETICS PER CAPITA SUMMARY
5.3 GERMANY
5.4 FRANCE
5.5 ITALY
5.6 U.K
5.7 SPAIN
5.8 BENELUX
5.9 SCANDINAVIA
5.10 SWITZERLAND
5.11 AUSTRIA
5.12 PORTUGAL
5.13 RUSSIA
5.14 DENTISTS PER POPULATION
GERMAN MARKET FOR DENTAL PROSTHETICS
6.1 INTRODUCTION
6.2 MARKET OVERVIEW FOR PROSTHETICS DEVICES
6.2.1 Market Analysis and Forecast
6.3 MARKET DRIVERS AND LIMITERS
6.3.1 Market Drivers
6.3.2 Market Limiters
6.4 MARKET FOR CROWNS AND BRIDGES
6.4.1 Market Analysis and Forecast
6.4.2 PFM Market
6.4.3 Full-Cast Market
6.4.4 All-Ceramic Market
6.5 MARKET FOR DENTURES
6.5.1 Market Analysis and Forecast
6.5.2 Market for Full Dentures
6.5.3 Market for Partial Dentures
6.6 MARKET FOR CAD/CAM SYSTEMS
6.6.1 Market Analysis and Forecast
6.7 MARKET DRIVERS AND LIMITERS
6.7.1 Market Drivers
6.7.2 Market Limiters
6.7.3 Full In-Lab CAD/CAM Systems
6.7.4 Standalone Scanner CAD/CAM Systems
6.7.5 Chairside Systems
6.7.6 Competitive Analysis
FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
7.1 INTRODUCTION
7.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
7.2.1 Market Analysis and Forecast
7.3 MARKET DRIVERS AND LIMITERS
7.3.1 Market Drivers
7.3.2 Market Limiters
7.4 MARKET FOR CROWNS AND BRIDGES
7.4.1 Market Analysis and Forecast
7.4.2 Porcelain-Fused-To-Metal
7.4.3 Full-Cast Market
7.4.4 All-Ceramic Market
7.5 MARKET FOR DENTURES
7.5.1 Market Analysis and Forecast
7.5.2 Market for Full Dentures
7.5.3 Market for Partial Dentures
7.6 MARKET FOR CAD/CAM SYSTEMS
7.6.1 Market Analysis and Forecast
7.7 MARKET DRIVERS AND LIMITERS
7.7.1 Market Drivers
7.7.2 Market Limiters
7.7.3 Full In-Lab CAD/CAM Systems
7.7.4 Standalone Scanner CAD/CAM Systems
7.7.5 Chairside Systems
7.8 COMPETITIVE ANALYSIS
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
8.1 INTRODUCTION
8.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
8.2.1 Market Analysis and Forecast
8.3 MARKET DRIVERS AND LIMITERS
8.3.1 Market Drivers
8.3.2 Market Limiters
8.4 MARKET FOR CROWNS AND BRIDGES
8.4.1 Market Analysis and Forecast
8.4.2 Porcelain-Fused-To-Metal Market
8.4.3 Full-Cast Market
8.4.4 All-Ceramic Market
8.5 MARKET FOR DENTURES
8.5.1 Market Analysis and Forecast
8.5.2 Market for Full Dentures
8.5.3 Market for Partial Dentures
8.6 MARKET FOR CAD/CAM SYSTEMS
8.6.1 Market Analysis and Forecast
8.7 MARKET DRIVERS AND LIMITERS
8.7.1 Market Drivers
8.7.2 Market Limiters
8.7.3 Full In-Lab CAD/CAM Systems
8.7.4 Standalone Scanner CAD/CAM Systems
8.7.5 Chairside Systems
8.8 COMPETITIVE ANALYSIS
U.K MARKET FOR DENTAL PROSTHETICS
9.1 INTRODUCTION
9.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
9.2.1 Market Analysis and Forecast
9.3 MARKET DRIVERS AND LIMITERS
9.3.1 Market Drivers
9.3.2 Market Limiters
9.4 MARKET FOR CROWNS AND BRIDGES
9.4.1 Market Analysis and Forecast
9.4.2 Porcelain-Fused-To-Metal Market
9.4.3 Full-Cast Market
9.4.4 All-Ceramic Market
9.5 MARKET FOR DENTURES
9.5.1 Market Analysis and Forecast
9.5.2 Market for Full Dentures
9.5.3 Market for Partial Dentures
9.6 MARKET FOR CAD/CAM SYSTEMS
9.6.1 Market Analysis and Forecast
9.7 MARKET DRIVERS AND LIMITERS
9.7.1 Market Drivers
9.7.2 Market Limiters
9.7.3 Full In-Lab CAD/CAM Systems
9.7.4 Standalone Scanner CAD/CAM Systems
9.7.5 Chairside Systems
9.8 COMPETITIVE ANALYSIS
SPANISH MARKET FOR DENTAL PROSTHETICS
10.1 INTRODUCTION
10.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
10.2.1 Market Analysis and Forecast
10.3 MARKET DRIVERS AND LIMITERS
10.3.1 Market Drivers
10.3.2 Market Limiters
10.4 MARKET FOR CROWNS AND BRIDGES
10.4.1 Market Analysis and Forecast
10.4.2 Porcelain-Fused-to-Metal Market
10.4.3 Full-Cast Market
10.4.4 All-Ceramic Market
10.5 MARKET FOR DENTURES
10.5.1 Market Analysis and Forecast
10.5.2 Market for Full Dentures
10.5.3 Market for Partial Dentures
10.6 MARKET FOR CAD/CAM SYSTEMS
10.6.1 Market Analysis and Forecast
10.7 MARKET DRIVERS AND LIMITERS
10.7.1 Market Drivers
10.7.2 Market Limiters
10.7.3 Full In-Lab CAD/CAM Systems
10.7.4 Standalone Scanner CAD/CAM Systems
10.7.5 Chairside Systems
10.8 COMPETITIVE ANALYSIS
BENELUXIAN MARKET FOR DENTAL PROSTHETICS
11.1 INTRODUCTION
11.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
11.2.1 Market Analysis and Forecast
11.3 MARKET DRIVERS AND LIMITERS
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 MARKET FOR CROWNS AND BRIDGES
11.4.1 Market Analysis and Forecast
11.4.2 Porcelain-Fused-To-Metal Market
11.4.3 Full-Cast Market
11.4.4 All-Ceramic Market
11.5 MARKET FOR DENTURES
11.5.1 Market Analysis and Forecast
11.5.2 Market for Full Dentures
11.5.3 Market for Partial Dentures
11.6 MARKET FOR CAD/CAM SYSTEMS
11.6.1 Market Analysis and Forecast
11.7 MARKET DRIVERS AND LIMITERS
11.7.1 Market Drivers
11.7.2 Market Limiters
11.7.3 Full In-Lab CAD/CAM Systems
11.7.4 Standalone Scanner CAD/CAM Systems
11.7.5 Chairside Systems
11.8 COMPETITIVE ANALYSIS
SCANDINAVIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
12.1 INTRODUCTION
12.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
12.2.1 Market Analysis and Forecast
12.2.2 Market Drivers
12.2.3 Market Limiters
12.3 MARKET FOR CROWNS AND BRIDGES
12.3.1 Market Analysis and Forecast
12.3.2 Porcelain-Fused-To-Metal Market
12.3.3 Full-Cast Market
12.3.4 All-Ceramic Market
12.4 MARKET FOR DENTURES
12.4.1 Market Analysis and Forecast
12.4.2 Market for Full Dentures
12.4.3 Market for Partial Dentures
12.5 MARKET FOR CAD/CAM SYSTEMS
12.5.1 Market Analysis and Forecast
12.6 MARKET DRIVERS AND LIMITERS
12.6.1 Market Drivers
12.6.2 Market Limiters
12.6.3 Full In-Lab CAD/CAM Systems
12.6.4 Standalone Scanner CAD/CAM Systems
12.6.5 Chairside Systems
12.7 COMPETITIVE ANALYSIS
SWISS MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
13.1 INTRODUCTION
13.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
13.2.1 Market Analysis and Forecast
13.2.2 Market Drivers
13.2.3 Market Limiters
13.3 MARKET FOR CROWNS AND BRIDGES
13.3.1 Market Analysis and Forecast
13.3.2 Porcelain-Fused-To-Metal Market
13.3.3 Full-Cast Market
13.3.4 All-Ceramic Market
13.4 MARKET FOR DENTURES
13.4.1 Market Analysis and Forecast
13.4.2 Market for Full Dentures
13.4.3 Market for Partial Dentures
13.5 MARKET FOR CAD/CAM SYSTEMS
13.5.1 Market Analysis and Forecast
13.6 MARKET DRIVERS AND LIMITERS
13.6.1 Market Drivers
13.6.2 Market Limiters
13.6.3 Full In-Lab CAD/CAM Systems
13.6.4 Standalone Scanner CAD/CAM Systems
13.6.5 Chairside Systems
13.7 COMPETITIVE ANALYSIS
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
14.1 INTRODUCTION
14.2 MARKET OVERVIEW
14.2.1 Market Analysis and Forecast
14.2.2 Market Drivers
14.2.3 Market Limiters
14.3 MARKET FOR CROWNS AND BRIDGES
14.3.1 Market Analysis and Forecast
14.3.2 Porcelain-Fused-To-Metal Market
14.3.3 Full-Cast Market
14.3.4 All-Ceramic Market
14.4 MARKET FOR DENTURES
14.4.1 Market Analysis and Forecast
14.4.2 Market for Full Dentures
14.4.3 Market for Partial Dentures
14.5 MARKET FOR CAD/CAM SYSTEMS
14.5.1 Market Analysis and Forecast
14.6 MARKET DRIVERS AND LIMITERS
14.6.1 Market Drivers
14.6.2 Market Limiters
14.6.3 Full In-Lab CAD/CAM Systems
14.6.4 Standalone Scanner CAD/CAM Systems
14.6.5 Chairside Systems
14.7 COMPETITIVE ANALYSIS
PORTUGUESE MARKET FOR DENTAL PROSTHETICS
15.1 INTRODUCTION
15.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
15.2.1 Market Analysis and Forecast
15.2.2 Market Drivers
15.2.3 Market Limiters
15.3 MARKET FOR CROWNS AND BRIDGES
15.3.1 Market Analysis and Forecast
15.3.2 Porcelain-Fused-to-Metal Market
15.3.3 Full-Cast Market
15.3.4 All-Ceramic Market
15.4 MARKET FOR DENTURES
15.4.1 Market Analysis and Forecast
15.4.2 Market for Full Dentures
15.4.3 Market for Partial Dentures
15.5 MARKET FOR CAD/CAM SYSTEMS
15.5.1 Market Analysis and Forecast
15.6 MARKET DRIVERS AND LIMITERS
15.6.1 Market Drivers
15.6.2 Market Limiters
15.6.3 Full In-Lab CAD/CAM Systems
15.6.4 Standalone Scanner CAD/CAM Systems
15.6.5 Chairside Systems
15.7 COMPETITIVE ANALYSIS
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
16.1 INTRODUCTION
16.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
16.2.1 Market Analysis and Forecast
16.2.2 Market Drivers
16.2.3 Market Limiters
16.3 MARKET FOR CROWNS AND BRIDGES
16.3.1 Market Analysis and Forecast
16.3.2 Porcelain-Fused-To-Metal Market
16.3.3 Full-Cast Market
16.3.4 All-Ceramic Market
16.4 MARKET FOR DENTURES
16.4.1 Market Analysis and Forecast
16.4.2 Market for Full Dentures
16.4.3 Market for Partial Dentures
16.5 MARKET FOR CAD/CAM SYSTEMS
16.5.1 Market Analysis and Forecast
16.6 MARKET DRIVERS AND LIMITERS
16.6.1 Market Drivers
16.6.2 Market Limiters
16.6.3 Full In-Lab CAD/CAM Systems
16.6.4 Standalone Scanner CAD/CAM Systems
16.6.5 Chairside Systems
16.7 COMPETITIVE ANALYSIS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
EUROPEAN AND RUSSIAN FEDERATION MARKET FOR DENTAL PROSTHETICS
Figure 4-1: Exchanges Rates for the Euro (€), 2008
Figure 4-2: European Market for Dental Prosthetics (€), 2005 – 2015
Figure 4-3: European Market for Dental Prosthetics (US$), 2005 – 2015
Figure 4-4: Crown and Brdige Units Segmented by Material Type, Europe, 2005 – 2015
Figure 4-5: European Market for Crowns and Bridges (€), 2005 – 2015
Figure 4-6: European Market for Crowns and Bridges (US$), 2005 – 2015
Figure 4-7: Denture Units Segmented by Material Type, Europe, 2005 – 2015
Figure 4-8: Dentures Market (€), Europe 2005 – 2015
Figure 4-9: Dentures Market (US$), Europe, 2005 – 2015
Figure 4-10: CAD/CAM Systems Market (€), Europe, 2005 - 2015
Figure 4-11: Full In-Lab CAD/CAM Systems Market, Europe (€), 2005 – 2015
Figure 4-12: Full In-Lab CAD/CAM Systems Market, Europe (US$), 2005 – 201543
Figure 4-13: Market for Standalone Scanner In-Lab CAD/CAM Systems, Europe (€), 2005 – 2015
Figure 4-14: Market for Standalone Scanner In-Lab CAD/CAM Systems, Europe (US$), 2005 – 2015
Figure 4-15: Chairside CAD/CAM Systems Market, Europe (€), 2005 – 2015
Figure 4-16: Chairside CAD/CAM Systems Market, Europe ($), 2005 – 2015
Figure 4-17: Total Market Share of In-Lab CAD/CAM Systems, Europe, 2008
Figure 4-18: Total Market Share of CAD/CAM Systems, Europe, 2008
COUNTRY PROFILES
Figure 5-1: Price Index, Europe, 2008
Figure 5-2: Country Indicators, Europe, 2008
Figure 5-3: Population per Dentist, 2008
GERMAN MARKET FOR DENTAL PROSTHETICS
Figure 6-1: Dental Prosthetics Market (€), Germany, 2005 – 2015
Figure 6-2: Dental Prosthetics Market (US$), Germany, 2005–2015
Figure 6-3: Market Drivers and Limiters for Dental Prosthetics, Germany, 2008
Figure 6-4: Crowns and Bridges Market (€), Germany, 2005 – 2015
Figure 6-5: Crowns and Bridges Market (US$), Germany, 2005–2015
Figure 6-6: Crowns and Bridges Market Segmented by Material Type, Germany, 2005–2015
Figure 6-7: PFM Devices Market (€), Germany, 2005–2015
Figure 6-8: PFM Devices Market (US$), Germany, 2005–2015
Figure 6-9: Full-Cast Devices Market (€), Germany, 2005–2015
Figure 6-10: Full-Cast Devices Market (US$), Germany, 2005–2015
Figure 6-11: All-Ceramic Devices Market (€), Germany, 2005–2015
Figure 6-12: All-Ceramic Devices Market (US$), Germany, 2005–2015
Figure 6-13: Dentures Segment by Type, Germany, 2005 – 2015
Figure 6-14: Dentures Market (€), Germany, 2005–2015
Figure 6-15: Dentures Market (US$), Germany, 2005–2015
Figure 6-16: Dentures Market Segmented by Type, Germany, 2005–2015
Figure 6-17: CAD/CAM Systems, Germany (€ and US$), 2005 – 2015
Figure 6-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 6-19: Full In-Lab CAD/CAM Systems Market, Germany (€), 2005 – 2015104
Figure 6-20: Full In-Lab CAD/CAM Systems Market, Germany (US$), 2005 – 2015
Figure 6-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Germany, 2008
Figure 6-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Germany (€), 2005 – 2015
Figure 6-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Germany (US$), 2005 – 2015
Figure 6-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Germany, 2008
Figure 6-25: Chairside CAD/CAM Systems Market, Germany (€), 2005 – 2015
Figure 6-26: Chairside CAD/CAM Systems Market, Germany ($), 2005 – 2015
Figure 6-27: Total Market Share of In-Lab CAD/CAM Systems, Germany, 2008118
Figure 6-28: Total Market Share of CAD/CAM Systems, Germany, 2008
FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS120
Figure 7-1: Dental Prosthetics Market (€), France, 2005 – 2015
Figure 7-2: Dental Prosthetics Market (US$), France, 2005 – 2015
Figure 7-3: Market Drivers and Limiters for Dental Prosthetics, France, 2007
Figure 7-4: Crowns and Bridges Market (€), France, 2005 – 2015
Figure 7-5: Crowns and Bridges Market (US$), France, 2005 – 2015
Figure 7-6: Crowns and Bridges Segmented by Material Type, France, 2005 – 2015
Figure 7-7: PFM Devices Market (€), France, 2005 – 2015
Figure 7-8: PFM Devices Market (US$), France, 2005 – 2015
Figure 7-9: Full-Cast Devices Market (€), France, 2005 – 2015
Figure 7-10: Full-Cast Devices Market (US$), France, 2004 – 2014
Figure 7-11: All-Ceramic Devices Market (€), France, 2005 – 2015
Figure 7-12: All-Ceramic Devices Market (US$), France, 2005 – 2015
Figure 7-13: Dentures Segmented by Type, France, 2005 – 2015
Figure 7-14: Dentures Market (€), France, 2005 – 2015
Figure 7-15: Dentures Market (US$), France, 2005 – 2015
Figure 7-16: Dentures Market Segmented by Type, France, 2005 – 2015
Figure 7-17: CAD/CAM Systems, France (€ and US$), 2005 – 2015
Figure 7-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 7-19: Full In-Lab CAD/CAM Systems Market, France (€), 2005 – 2015
Figure 7-20: Full In-Lab CAD/CAM Systems Market, France (US$), 2005 – 2015150
Figure 7-21: Leading Competitors, Full In-Lab CAD/CAM Systems, France, 2008153
Figure 7-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, France (€), 2005 – 2015
Figure 7-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, France (US$), 2005 – 2015
Figure 7-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, France, 2008
Figure 7-25: Chairside CAD/CAM Systems Market, France (€), 2005 – 2015
Figure 7-26: Chairside CAD/CAM Systems Market, France ($), 2005 – 2015
Figure 7-27: Total Market Share of In-Lab CAD/CAM Systems, France, 2008
Figure 7-28: Total Market Share of CAD/CAM Systems, France, 2008
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 8-1: Dental Prosthetics Market (€), Italy, 2005 – 2015
Figure 8-2: Dental Prosthetics Market (US$), Italy, 2005 – 2015
Figure 8-3: Market Drivers and Limiters for Dental Prosthetics, Italy, 2007
Figure 8-4: Crowns and Bridges Market (€), Italy, 2005 – 2015
Figure 8-5: Crowns and Bridges Market (US$), Italy, 2005 – 2015
Figure 8-6: Crowns and Bridges Segmented by Material Type, Italy, 2005 – 2015179
Figure 8-7: PFM Devices Market (€), Italy, 2005 – 2015
Figure 8-8: PFM Devices Market (US$), Italy, 2005 – 2015
Figure 8-9: Full-Cast Devices Market (€), Italy, 2005 – 2015
Figure 8-10: Full-Cast Devices Market (US$), Italy, 2005 – 2015
Figure 8-11: All-Ceramic Devices Market (€), Italy, 2005 – 2015
Figure 8-12: All-Ceramic Devices Market (US$), Italy, 2005 – 2015
Figure 8-13: Dentures Market by Type, Italy, 2005 – 2015
Figure 8-14: Dentures Market (€), Italy, 2005 – 2015
Figure 8-15: Dentures Market (US$), Italy, 2005 – 2015
Figure 8-16: Dentures Market Segmented by Type, Italy, 2004 – 2014
Figure 8-17: CAD/CAM Systems, Italy (€ and US$), 2005 – 2015
Figure 8-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 8-19: Full In-Lab CAD/CAM Systems Market, Italy (€), 2005 – 2015
Figure 8-20: Full In-Lab CAD/CAM Systems Market, Italy (US$), 2005 – 2015
Figure 8-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Italy, 2008
Figure 8-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Italy (€), 2005 – 2015
Figure 8-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Italy (US$), 2005 – 2015
Figure 8-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Italy, 2008
Figure 8-25: Chairside CAD/CAM Systems Market, Italy (€), 2005 – 2015
Figure 8-26: Chairside CAD/CAM Systems Market, Italy (US$), 2005 – 2015
Figure 8-27: Total Market Share of In-Lab CAD/CAM Systems, Italy, 2008
Figure 8-28: Total Market Share of CAD/CAM Systems, Italy, 2008
U.K MARKET FOR DENTAL PROSTHETICS
Figure 9-1: Dental Prosthetics Market (€), U.K., 2005 – 2015
Figure 9-2: Dental Prosthetics Market (?), U.K., 2005 – 2015
Figure 9-3: Dental Prosthetics Market (US$), U.K., 2005 – 2015
Figure 9-4: Market Drivers and Limiters for Dental Prosthetics, U.K., 2008
Figure 9-5: Crowns and Bridges Market (€), U.K., 2005 – 2015
Figure 9-6: Crowns and Bridges Market (US$), U.K., 2005 – 2015
Figure 9-7: Crowns and Bridges Market (?), U.K., 2005 – 2015
Figure 9-8: Crowns and Bridges Segmented by Material Type, U.K., 2005 – 2015226
Figure 9-9: PFM Devices Market (€), U.K., 2005 – 2015
Figure 9-10: PFM Devices Market (US$), U.K., 2005 – 2015
Figure 9-11: PFM Devices Market (?), U.K., 2005 – 2015
Figure 9-12: Full-Cast Devices Market (€), U.K., 2004 – 2014
Figure 9-13: Full-Cast Devices Market (US$), U.K., 2004 – 2014
Figure 9-14: Full-Cast Devices Market (?), U.K., 2004 – 2014
Figure 9-15 All-Ceramic Devices Market (€), U.K., 2005 – 2015
Figure 9-16: All-Ceramic Devices Market (US$), U.K., 2005 – 2015
Figure 9-17: All-Ceramic Devices Market (?), U.K., 2005 – 2015
Figure 9-18: Dentures Segment by Type, U.K., 2005 – 2015
Figure 9-19: Dentures Market (€), U.K., 2005 – 2015
Figure 9-20: Dentures Market (US$), U.K., 2005 – 2015
Figure 9-21: Dentures Market (?), U.K., 2005 – 2015
Figure 9-22: Dentures Market Segmented by Type, U.K., 2005 – 2015
Figure 9-23: CAD/CAM Systems, U.K (€, US$ and ?), 2005 – 2015
Figure 9-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 9-25: Full In-Lab CAD/CAM Systems Market, U.K (€), 2005 – 2015
Figure 9-26: Full In-Lab CAD/CAM Systems Market, U.K (US$), 2005 – 2015
Figure 9-27: Full In-Lab CAD/CAM Systems Market, U.K (?), 2005 – 2015
Figure 9-28: Leading Competitors, Full In-Lab CAD/CAM Systems, U.K., 2008
Figure 9-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, U.K. (€), 2005 – 2015
Figure 9-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, U.K. (US$), 2005 – 2015
Figure 9-31: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, U.K., 2008
Figure 9-32: Chairside CAD/CAM Systems Market, U.K (€), 2005 – 2015
Figure 9-33: Chairside CAD/CAM Systems Market, U.K ($), 2005 – 2015
Figure 9-34: Chairside CAD/CAM Systems Market, U.K (?), 2005 – 2015
Figure 9-35: Total Market Share of In-Lab CAD/CAM Systems, U.K., 2008
Figure 9-36: Total Market Share of CAD/CAM Systems, U.K., 2008
SPANISH MARKET FOR DENTAL PROSTHETICS
Figure 10-1: Dental Prosthetics Market (€), Spain, 2005 – 2015
Figure 10-2: Dental Prosthetics Market (US$), Spain, 2005 – 2015
Figure 10-3: Market Drivers and Limiters for Dental Prosthetics, Spain, 2007
Figure 10-4: Crowns and Bridges Market (€), Spain, 2005 – 2015
Figure 10-5: Crowns and Bridges Market (US$), Spain, 2005 – 2015
Figure 10-6: Crown and Bridges Segmented by Material Type, Spain, 2005 – 2015
Figure 10-7: PFM Devices Market (€), Spain, 2005 – 2015
Figure 10-8: PFM Devices Market (US$), Spain, 2005 – 2015
Figure 10-9: Full-Cast Devices Market (€), Spain, 2005 – 2015
Figure 10-10: Full-Cast Devices Market (US$), Spain, 2005 – 2015
Figure 10-11: All-Ceramic Devices Market (€), Spain, 2005 – 2015
Figure 10-12: All-Ceramic Devices Market (US$), Spain, 2005 – 2015
Figure 10-13: Dentures Segmented by Type, Spain, 2005 – 2015
Figure 10-14: Dentures Market (€), Spain, 2005 – 2015
Figure 10-15: Dentures Market (US$), Spain, 2005 – 2015
Figure 10-16: Dentures Market Segmented by Type, Spain, 2005 – 2015
Figure 10-17: CAD/CAM Systems, Spain (€ and US$), 2005 – 2015
Figure 10-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 10-19: Full In-Lab CAD/CAM Systems Market, Spain (€), 2005 – 2015
Figure 10-20: Full In-Lab CAD/CAM Systems Market, Spain (US$), 2005 – 2015293
Figure 10-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Spain, 2008296
Figure 10-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Spain (€), 2005 – 2015
Figure 10-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Spain (US$), 2005 – 2015
Figure 10-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Spain, 2008
Figure 10-25: Chairside CAD/CAM Systems Market, Spain (€), 2005 – 2015
Figure 10-26: Chairside CAD/CAM Systems Market, Spain (US$), 2005 – 2015
Figure 10-27: Total Market Share of In-Lab CAD/CAM Systems, Spain, 2008
Figure 10-28: Total Market Share of CAD/CAM Systems, Spain, 2008
BENELUXIAN MARKET FOR DENTAL PROSTHETICS
Figure 11-1: Dental Prosthetics Market (€), Benelux, 2005 – 2015
Figure 11-2: Dental Prosthetics Market (US$), Benelux, 2005 – 2015
Figure 11-3: Market Drivers and Limiters for Dental Prosthetics, Benelux, 2007
Figure 11-4: Crowns and Bridges Market (€), Benelux, 2005 – 2015
Figure 11-5: Crowns and Bridges Market (US$), Benelux, 2005 – 2015
Figure 11-6: Crown and Bridges Segmented by Material Type, Benelux, 2005 – 2015
Figure 11-7: PFM Devices Market (€), Benelux, 2005 – 2015
Figure 11-8 PFM Devices Market (US$), Benelux, 2005 – 2015
Figure 11-9: Full-Cast Devices Market (€), Benelux, 2005 – 2015
Figure 11-10: Full-Cast Devices Market (US$), Benelux, 2005 – 2015
Figure 11-11: All-Ceramic Devices Market (€), Benelux, 2005 – 2015
Figure 11-12: All-Ceramic Devices Market (US$), Benelux, 2005 – 2015
Figure 11-13: Dentures Segmented by Type, Benelux, 2005 – 2015
Figure 11-14: Dentures Market (€), Benelux, 2005 – 2015
Figure 11-15: Dentures Market (US$), Benelux, 2005 – 2015
Figure 11-16: Dentures Market Segmented by Type, Benelux, 2005 – 2015
Figure 11-17: CAD/CAM Systems, Benelux (€ and US$), 2005 – 2015
Figure 11-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 11-19: Full In-Lab CAD/CAM Systems Market, Benelux (€), 2005 – 2015338
Figure 11-20: Full In-Lab CAD/CAM Systems Market, Benelux (US$), 2005 – 2015
Figure 11-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Benelux, 2008
Figure 11-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Benelux (€), 2005 – 2015
Figure 11-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Benelux (US$), 2005 – 2015
Figure 11-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Benelux, 2008
Figure 11-25: Chairside CAD/CAM Systems Market, Benelux (€), 2005 – 2015
Figure 11-26: Chairside CAD/CAM Systems Market, Benelux (US$), 2005 – 2015
Figure 11-27: Total Market Share of In-Lab CAD/CAM Systems, Benelux, 2008352
Figure 11-28: Total Market Share of CAD/CAM Systems, Benelux, 2008
SCANDINAVIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 12-1: Dental Prosthetics Market (€), Scandinavia, 2005 – 2015
Figure 12-2: Dental Prosthetics Market (US$), Scandinavia, 2005 – 2015
Figure 12-3: Market Drivers and Limiters for Dental Prosthetics, Scandinavia, 2008
Figure 12-4: Crowns and Bridges Market (€), Scandinavia, 2005 – 2015
Figure 12-5: Crowns and Bridges Market (US$), Scandinavia, 2005 – 2015
Figure 12-6: Crowns and Bridges Market Segmented by Material Type, Scandinavia, 2005 – 2015
Figure 12-7: PFM Devices Market (€), Scandinavia, 2005 – 2015
Figure 12-8: PFM Devices Market (US$), Scandinavia, 2005 – 2015
Figure 12-9: Full-Cast Devices Market (€), Scandinavia, 2005 – 2015
Figure 12-10: Full-Cast Devices Market (US$), Scandinavia, 2005 – 2015
Figure 12-11: All-Ceramic Devices Market (€), Scandinavia, 2005 – 2015
Figure 12-12: All-Ceramic Devices Market (US$), Scandinavia, 2005 – 2015
Figure 12-13: Dentures Market Segmented by Type, Scandinavia, 2005 – 2015
Figure 12-14: Dentures Market (€), Scandinavia, 2005 – 2015
Figure 12-15: Dentures Market (US$), Scandinavia, 2005 – 2015
Figure 12-16: Dentures Segmented by Type, Scandinavia, 2005 – 2015
Figure 12-17: CAD/CAM Systems, Scandinavia (€ and US$), 2005 – 2015
Figure 12-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 12-19: Full In-Lab CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Figure 12-20: Full In-Lab CAD/CAM Systems Market, Scandinavia (US$), 2005 – 2015
Figure 12-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Scandinavia, 2008
Figure 12-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Scandinavia (€), 2005 – 2015
Figure 12-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Scandinavia (US$), 2005 – 2015
Figure 12-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Scandinavia, 2008
Figure 12-25: Chairside CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Figure 12-26: Chairside CAD/CAM Systems Market, Scandinavia (US$), 2005 – 2015
Figure 12-27: Total Market Share of In-Lab CAD/CAM Systems, Scandinavia, 2008
Figure 12-28: Total Market Share of CAD/CAM Systems, Scandinavia, 2008
SWISS MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 13-1: Dental Prosthetics Market (€), Switzerland, 2005 – 2015
Figure 13-2: Dental Prosthetics Market (US$), Switzerland, 2005 – 2015
Figure 13-3: Dental Prosthetics Market (CHF), Switzerland, 2005 – 2015
Figure 13-4: Market Drivers and Limiters for Dental Prosthetics, Switzerland, 2008
Figure 13-5: Crowns and Bridges Market (€), Switzerland, 2005 – 2015
Figure 13-6: Crowns and Bridges Market (US$), Switzerland, 2005 – 2015
Figure 13-7: Crowns and Bridges Market (CHF), Switzerland, 2005 – 2015
Figure 13-8: Crowns and Bridges Segmented by Material Type, Switzerland, 2005 – 2015
Figure 13-9: PFM Devices Market (€), Switzerland, 2005 – 2015
Figure 13-10: PFM Devices Market (US$), Switzerland, 2005 – 2015
Figure 13-11: PFM Devices Market (CHF), Switzerland, 2005 – 2015
Figure 13-12: Full-Cast Devices Market (€), Switzerland, 2005 – 2015
Figure 13-13: Full-Cast Devices Market (US$), Switzerland, 2005 – 2015
Figure 13-14: Full-Cast Devices Market (CHF), Switzerland, 2005 – 2015
Figure 13-15: All-Ceramic Devices Market (€), Switzerland, 2005 – 2015
Figure 13-16: All-Ceramic Devices Market (US$), Switzerland, 2005 – 2015
Figure 13-17: All-Ceramic Devices Market (CHF), Switzerland, 2005 – 2015
Figure 13-18: Dentures Segmented by Type, Switzerland, 2005 – 2015
Figure 13-19: Dentures Market (€), Switzerland, 2005 – 2015
Figure 13-20: Dentures Market (US$), Switzerland, 2005 – 2015
Figure 13-21: Dentures Market (CHF), Switzerland, 2005 – 2015
Figure 13-22: Dentures Segmented by Type, Switzerland, 2005 – 2015
Figure 13-23: CAD/CAM Systems, Switzerland (€, US$ and CHF), 2005 – 2015429
Figure 13-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 13-25: Full In-Lab CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Figure 13-26: Full In-Lab CAD/CAM Systems Market, Switzerland (US$), 2005 – 2015
Figure 13-27: Full In-Lab CAD/CAM Systems Market, Switzerland (CHF), 2005 – 2015
Figure 13-28: Leading Competitors, Full In-Lab CAD/CAM Systems, Switzerland, 2008
Figure 13-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, Switzerland (€), 2005 – 2015
Figure 13-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, Switzerland (US$), 2005 – 2015
Figure 13-31: Market for Standalone Scanner In-Lab CAD/CAM Systems, Switzerland (CHF), 2005 – 2015
Figure 13-32: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Switzerland, 2008
Figure 13-33: Chairside CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Figure 13-34: Chairside CAD/CAM Systems Market, Switzerland (US$), 2005 – 2015
Figure 13-35: Chairside CAD/CAM Systems Market, Switzerland (CHF), 2005 – 2015
Figure 13-36: Total Market Share of In-Lab CAD/CAM Systems, Switzerland, 2008
Figure 13-37: Total Market Share of CAD/CAM Systems, Switzerland, 2008
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 14-1: Dental Prosthetics Market (€), Austria, 2005 – 2015
Figure 14-2: Dental Prosthetics Market (US$), Austria, 2005 – 2015
Figure 14-3: Market Drivers and Limiters for Dental Prosthetics, Austria, 2007
Figure 14-4: Crowns and Bridges Market (€), Austria, 2005 – 2015
Figure 14-5: Crowns and Bridges Market (US$), Austria, 2005 – 2015Error! Bookmark not define
Figure 14-6: Crowns and Bridges Segmented by Material Type, Austria, 2005 – 2015
Figure 14-7: PFM Devices Market (€), Austria, 2005 – 2015
Figure 14-8: PFM Devices Market (US$), Austria, 2005 – 2015
Figure 14-9: Full-Cast Devices Market (€), Austria, 2005 – 2015
Figure 14-10: Full-Cast Devices Market (US$), Austria, 2005 – 2015
Figure 14-11: All-Ceramic Devices Market (€), Austria, 2005 – 2015
Figure 14-12: All-Ceramic Devices Market (US$), Austria, 2005 – 2015
Figure 14-13: Dentures Segmented by Type, Austria, 2008
Figure 14-14: Dentures Market (€), Austria, 2005 – 2015
Figure 14-15: Dentures Market (US$), Austria, 2005 – 2015
Figure 14-16: Dentures Segmented by Type, Austria, 2005 – 2015
Figure 14-17: CAD/CAM Systems, Austria (€ and US$), 2005 – 2015
Figure 14-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 14-19: Full In-Lab CAD/CAM Systems Market, Austria (€), 2005 – 2015485
Figure 14-20: Full In-Lab CAD/CAM Systems Market, Austria (US$), 2005 – 2015
Figure 14-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Austria, 2008
Figure 14-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Austria (€), 2005 – 2015
Figure 14-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Austria (US$), 2005 – 2015
Figure 14-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Austria, 2008
Figure 14-25: Chairside CAD/CAM Systems Market, Austria (€), 2005 – 2015
Figure 14-26: Chairside CAD/CAM Systems Market, Austria (US$), 2005 – 2015495
Figure 14-27: Total Market Share of In-Lab CAD/CAM Systems, Austria, 2008
Figure 14-28: Total Market Share of CAD/CAM Systems, Austria, 2008
PORTUGUESE MARKET FOR DENTAL PROSTHETICS
Figure 15-1: Dental Prosthetics Market (€), Portugal, 2005 – 2015
Figure 15-2: Dental Prosthetics Market (US$), 2005 – 2015
Figure 15-3: Market Drivers and Limiters for Dental Prosthetics, Portugal, 2007508
Figure 15-4: Crowns and Bridges Market (€), Portugal, 2005 – 2015
Figure 15-5: Crowns and Bridges Market (US$), Portugal, 2005 – 2015
Figure 15-6: Crown and Bridges Segmented by Material Type, Portugal, 2005 – 2015
Figure 15-7: PFM Devices Market (€), Portugal, 2005 – 2015
Figure 15-8: PFM Devices Market (US$), Portugal, 2005 – 2015
Figure 15-9: Full-Cast Devices Market (€), Portugal, 2005 – 2015
Figure 15-10: Full-Cast Devices Market (US$), Portugal, 2005 – 2015
Figure 15-11: All-Ceramic Devices Market (€), Portugal, 2005 – 2015
Figure 15-12: All-Ceramic Devices Market (US$), 2005 – 2015
Figure 15-13: Dentures Segmented by Type, Portugal, 2005 – 2015
Figure 15-14: Dentures Market (€), Portugal, 2005 – 2015
Figure 15-15: Dentures Market (US$), Portugal, 2005 – 2015
Figure 15-16: Dentures Segmented by Type, Portugal, 2005 – 2015
Figure 15-17: CAD/CAM Systems, Portugal (€ and US$), 2005 – 2015
Figure 15-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 15-19: Full In-Lab CAD/CAM Systems Market, Portugal (€), 2005 – 2015530
Figure 15-20: Full In-Lab CAD/CAM Systems Market, Portugal (US$), 2005 – 2015
Figure 15-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Portugal, 2008
Figure 15-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Portugal (€), 2005 – 2015
Figure 15-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Portugal (US$), 2005 – 2015
Figure 15-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Portugal, 2008
Figure 15-25: Chairside CAD/CAM Systems Market, Portugal (€), 2005 – 2015
Figure 15-26: Chairside CAD/CAM Systems Market, Portugal (US$), 2005 – 2015
Figure 15-27: Total Market Share of In-Lab CAD/CAM Systems, Portugal, 2008544
Figure 15-28: Total Market Share of CAD/CAM Systems, Portugal, 2008
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Figure 16-2: Dental Prosthetics Market (US$), Russian Federation, 2005 – 2015551
Figure 16-3: Dental Prosthetics Market (RUB), Russian Federation, 2005 – 2015552
Figure 16-4: Market Drivers and Limiters for Dental Prosthetics, Russian Federation, 2008
Figure 16-5: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Figure 16-6: Crowns and Bridges Market (US$), Russian Federation, 2005 – 2015557
Figure 16-7: Crowns and Bridges Market (RUB), Russian Federation, 2005 – 2015
Figure 16-8: Crowns and Bridges Segmented by Material Type, Russian Federation, 2005 – 2015
Figure 16-9: PFM Devices Market (€), Russian Federation 2005 – 2015
Figure 16-10: PFM Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-11: PFM Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-12: Full-Cast Devices Market (€), Russian Federation, 2005 – 2015
Figure 16-13: Full-Cast Devices Market (US$), Russian Federation, 2005 – 2015567
Figure 16-14: Full-Cast Devices Market (RUB), Russian Federation, 2005 – 2015567
Figure 16-15: All-Ceramic Devices Market (€), Russian Federation, 2005 – 2015569
Figure 16-16: All-Ceramic Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-17: All-Ceramic Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-18: Dentures Segmented by Type, Russian Federation, 2005 – 2015
Figure 16-19: Dentures Market (€), Russian Federation, 2005 – 2015
Figure 16-20: Dentures Market (US$), Russian Federation, 2005 – 2015
Figure 16-21: Dentures Market (RUB), Russian Federation, 2005 – 2015
Figure 16-22: Dentures Segmented By Type, Russian Federation, 2005 – 2015
Figure 16-23: CAD/CAM Systems, Russia (€, US$, RUB), 2005 – 2015
Figure 16-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 16-25: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-26: Full In-Lab CAD/CAM Systems Market, Russia (US$), 2005 – 2015
Figure 16-27: Full In-Lab CAD/CAM Systems Market, Russia (RUB), 2005 – 2015
Figure 16-28: Leading Competitors, Full In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (€), 2005 – 2015
Figure 16-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (US$), 2005 – 2015
Figure 16-31: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (RUB), 2005 – 2015
Figure 16-32: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-33: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-34: Chairside CAD/CAM Systems Market, Russia (US$), 2005 – 2015594
Figure 16-35: Chairside CAD/CAM Systems Market, Russia (US$), 2005 – 2015595
Figure 16-36: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-37: Total Market Share of CAD/CAM Systems, Russia, 2008
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market (€), Europe, 2005 – 2015
Chart 1-2: Market Value of Dental Prosthetics by Country, 20008
Chart 1-3: Full-Cast Crowns and Bridges Market (€), Europe, 2005 – 2015
Chart 1-4: Unit Share by Material Type for Crowns and Bridges, Europe, 2008
Chart 1-5: Dentures Market (€), Europe, 2005 – 2015
Chart 1-6: CAD/CAM Systems Market (€), Europe, 2005 – 2015
Chart 1-7: Market Share for In-Lab CAD/CAM Systems, Europe, 2008
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
EUROPEAN AND RUSSIAN FEDERATION MARKET FOR DENTAL
PROSTHETICS
Chart 4-1: Combined European Market for Dental Prosthetics (€), 2005 – 2015
Chart 4-2: Crown and Bridge Units Segmented by Material Type, Europe, 2005 – 2015
Chart 4-3: European Market for Crowns and Bridges, (€), 2005 – 2015
Chart 4-4: Dentures Market (€), Europe, 2005 – 2015
Chart 4-5: Overall CAD/CAM Market (€), Europe, 2005 – 2015
Chart 4-6: Full In-Lab CAD/CAM Systems Market, (€) Europe, 2005 – 2015
Chart 4-7: Market for Standalone Scanner CAD/CAM Systems, Europe (€), 2005 – 2015
Chart 4-8: Chairside CAD/CAM Systems Market, Europe (€), 2005 – 2015
Chart 4-9: Total Market Share of In-Lab CAD/CAM Systems, Europe, 2008
Chart 4-10: Total Market Share of CAD/CAM Systems, Europe, 2008
COUNTRY PROFILES
Chart 5-1: Country Statistics, Germany, 2008
Chart 5-2: Country Statistics, France, 2008
Chart 5-3: Country Statistics, Italy, 2008
Chart 5-4: Country Statistics, U.K., 2008
Chart 5-5: Country Statistics, Spain, 2008
Chart 5-6: Country Statistics, Benelux, 2008
Chart 5-7: Country Statistics, Scandinavia, 2008
Chart 5-8: Country Statistics, Switzerland, 2008
Chart 5-9: Country Statistics, Austria, 2008
Chart 5-10: Country Statistics, Portugal, 2008
Chart 5-11: Country Statistics, Russia, 2008
GERMAN MARKET FOR DENTAL PROSTHETICS
Chart 6-1: Dental Prosthetics Market (€), Germany, 2005–2015
Chart 6-2: Crowns and Bridges Market (€), Germany, 2005–2015
Chart 6-3: Crowns and Bridges Market Segmented by Material Type, Germany, 2008
Chart 6-4: Crowns and Bridges Unit Share by Material Type, Germany, 2005– 2015
Chart 6-5: Dentures Market (€), Germany, 2005–2015
Chart 6-6: CAD/CAM Systems Market (€), Germany, 2005 – 2015
Chart 6-7: Full In-Lab CAD/CAM Systems Market, (€) 2005 – 2015
Chart 6-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Germany, 2008
Chart 6-9: Market for Standalone Scanner CAD/CAM Systems, Germany (€), 2005 – 2015
Chart 6-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Germany, 2008
Chart 6-11: Chairside CAD/CAM Systems Market, Germany (€), 2005 – 2015
Chart 6-12: Total Market Share of In-Lab CAD/CAM Systems, Germany, 2008
Chart 6-13: Total Market Share of CAD/CAM Systems, Germany, 2008
FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 7-1: Dental Prosthetics Market (€), France, 2005 – 2015
Chart 7-2: Crowns and Bridges Market (€), France, 2005 – 2015
Chart 7-3: Crowns and Bridges Segmented by Material Type, France, 2008
Chart 7-4: Crowns and Bridges Unit Share by Material Type, France, 2005 – 2015
Chart 7-5: Dentures Market (€), France, 2005 – 2015
Chart 7-6: CAD/CAM Systems Market (€), France, 2005 - 2015
Chart 7-7: Full In-Lab CAD/CAM Systems Market, France (€), 2005 – 2015
Chart 7-8: Leading Competitors, Full In-Lab CAD/CAM System Units, France, 2008
Chart 7-9: Market for Standalone Scanner CAD/CAM Systems, France (€), 2005 – 2015
Chart 7-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, France, 2008
Chart 7-11: Chairside CAD/CAM Systems Market, France (€), 2005 – 2015
Chart 7-12: Total Market Share of In-Lab CAD/CAM Systems, France, 2008
Chart 7-13: Total Market Share of CAD/CAM Systems, France, 2008
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 8-1: Dental Prosthetics Market (€), Italy, 2005 – 2015
Chart 8-2: Crowns and Bridges Market (€), Italy, 2005 – 2015
Chart 8-3: Crowns and Bridges Segmented by Material Type, Italy, 2008
Chart 8-4: Crowns and Bridges Unit Share by Material Type, Italy, 2005 – 2015
Chart 8-5: Dentures Market (€), Italy, 2005 – 2015
Chart 8-6: CAD/CAM Systems Market (€), Italy, 2005 - 2015
Chart 8-7: Full In-Lab CAD/CAM Systems Market, Italy (€), 2005 – 2015
Chart 8-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Italy, 2008
Chart 8-9: Market for Standalone Scanner CAD/CAM Systems, Italy (€), 2005 – 2015
Chart 8-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Italy, 2008
Chart 8-11: Chairside CAD/CAM Systems Market, Italy (€), 2005 – 2015
Chart 8-12: Total Market Share of In-Lab CAD/CAM Systems, Italy, 2008
Chart 8-13: Total Market Share of CAD/CAM Systems, Italy, 2008
U.K MARKET FOR DENTAL PROSTHETICS
Chart 9-1: Dental Prosthetics Market (€), U.K., 2005 – 2015
Chart 9-2: Crowns and Bridges Market (€), U.K., 2005 – 2015
Chart 9-3: Crowns and Bridges Market Segmented by Material Type, 2008
Chart 9-4: Crowns and Bridges by Material Type, U.K., 2005 – 2015
Chart 9-5: Dentures Market (€), U.K., 2005 – 2015
Chart 9-6: CAD/CAM Systems Market (€), U.K., 2005 - 2015
Chart 9-7: Full In-Lab CAD/CAM Systems Market, U.K (€), 2005 – 2015
Chart 9-8: Leading Competitors, Full In-Lab CAD/CAM System Units, U.K., 2008
Chart 9-9: Market for Standalone Scanner CAD/CAM Systems, U.K (€), 2005 – 2015
Chart 9-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, U.K., 2008
Chart 9-11: Chairside CAD/CAM Systems Market, U.K (€), 2005 – 2015
Chart 9-12: Total Market Share of In-Lab CAD/CAM Systems, U.K., 2008
Chart 9-13: Total Market Share of CAD/CAM Systems, U.K., 2008
SPANISH MARKET FOR DENTAL PROSTHETICS
Chart 10-1: Dental Prosthetics Market (€), Spain, 2005 – 2015
Chart 10-2: Crowns and Bridges Market (€), Spain, 2005 – 2015
Chart 10-3: Crowns and Bridges Segmented by Material Type, Spain, 2008
Chart 10-4: Crowns and Bridges Unit Share by Material Type, Spain, 2005 – 2015
Chart 10-5: Dentures Market (€), Spain, 2005 – 2015
Chart 10-6: CAD/CAM Systems Market (€), Spain, 2005 - 2015
Chart 10-7: Full In-Lab CAD/CAM Systems Market, Spain (€), 2005 – 2015
Chart 10-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Spain, 2008
Chart 10-9: Market for Standalone Scanner CAD/CAM Systems, Spain (€), 2005 – 2015
Chart 10-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Spain, 2008
Chart 10-11: Chairside CAD/CAM Systems Market, Spain (€), 2005 – 2015
Chart 10-12: Total Market Share of In-Lab CAD/CAM Systems, Spain, 2008
Chart 10-13: Total Market Share of CAD/CAM Systems, Spain, 2008
BENELUXIAN MARKET FOR DENTAL PROSTHETICS
Chart 11-1: Dental Prosthetics Market (€), Benelux, 2005 – 2015
Chart 11-2: Crowns and Bridges Market (€), Benelux, 2005 – 2015
Chart 11-3: Crowns and Bridges Segmented by Material Type, Benelux, 2008
Chart 11-4: Crowns and Bridges Unit Share by Material Type, Benelux, 2005 – 2015
Chart 11-5: Dentures Market (€), Benelux, 2005 – 2015
Chart 11-6: CAD/CAM Systems Market (€), Benelux, 2005 - 2015
Chart 11-7: Full In-Lab CAD/CAM Systems Market, Benelux (€), 2005 – 2015
Chart 11-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Benelux, 2008
Chart 11-9: Market for Standalone Scanner CAD/CAM Systems, Benelux (€), 2005 – 2015
Chart 11-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Benelux, 2008
Chart 11-11: Chairside CAD/CAM Systems Market, Benelux (€), 2005 – 2015
Chart 11-12: Total Market Share of In-Lab CAD/CAM Systems, Benelux, 2008
Chart 11-13: Total Market Share of CAD/CAM Systems, Benelux, 2008
SCANDINAVIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 12-1: Dental Prosthetics Market (€), Scandinavia, 2005 – 2015
Chart 12-2: Crowns and Bridges Market (€), Scandinavia, 2005 – 2015
Chart 12-3: Crowns and Bridges Market Segmented by Material Type, Scandinavia, 2008
Chart 12-4: Crowns and Bridges Unit Share by Material Type, Scandinavia, 2005 – 2015
Chart 12-5: Dentures Market (€), Scandinavia, 2005 – 2015
Chart 12-6: CAD/CAM Systems Market (€), Scandinavia, 2005 - 2015
Chart 12-7: Full In-Lab CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Chart 12-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Scandinavia, 2008
Chart 12-9: Market for Standalone Scanner CAD/CAM Systems, Scandinavia (€), 2005 – 2015
Chart 12-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Scandinavia, 2008
Chart 12-11: Chairside CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Chart 12-12: Total Market Share of In-Lab CAD/CAM Systems, Scandinavia, 2008
Chart 12-13: Total Market Share of CAD/CAM Systems, Scandinavia, 2008
SWISS MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 13-1: Dental Prosthetics Market (€), Switzerland, 2005 – 2015
Chart 13-2: Crowns and Bridges Market (€), Switzerland, 2005 – 2015
Chart 13-3: Crowns and Bridges Segmented by Material Type, Switzerland, 2008
Chart 13-4: Crowns and Bridges Unit Share by Material Type, Switzerland, 2005 – 2015
Chart 13-5: Dentures Market (€), Switzerland, 2005 – 2015
Chart 13-6: CAD/CAM Systems Market (€), Switzerland, 2005 - 2015
Chart 13-7: Full In-Lab CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Chart 13-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Switzerland, 2008
Chart 13-9: Market for Standalone Scanner CAD/CAM Systems, Switzerland (€), 2005 – 2015
Chart 13-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Switzerland, 2008
Chart 13-11: Chairside CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Chart 13-12: Total Market Share of In-Lab CAD/CAM Systems, Switzerland, 2008
Chart 13-13: Total Market Share of CAD/CAM Systems, Switzerland, 2008
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 14-1: Dental Prosthetics Market (€), Austria, 2005 – 2015
Chart 14-2: Crowns and Bridges Market (€), Austria, 2005 – 2015
Chart 14-3: Crowns and Bridges Market Segmented by Material Type, Austria, 2008
Chart 14-4: Crowns and Bridges Unit Share by Material Type, Austria, 2005 – 2015
Chart 14-5: Dentures Market (€), Austria, 2005 – 2015
Chart 14-6: CAD/CAM Systems Market (€), Austria, 2005 - 2015
Chart 14-7: Full In-Lab CAD/CAM Systems Market, Austria (€), 2005 – 2015
Chart 14-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Austria, 2008
Chart 14-9: Market for Standalone Scanner CAD/CAM Systems, Austria (€), 2005 – 2015
Chart 14-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Austria, 2008
Chart 14-11: Chairside CAD/CAM Systems Market, Austria (€), 2005 – 2015
Chart 14-12: Total Market Share of In-Lab CAD/CAM Systems, Austria, 2008
Chart 14-13: Total Market Share of CAD/CAM Systems, Austria, 2008
PORTUGUESE MARKET FOR DENTAL PROSTHETICS
Chart 15-1: Dental Prosthetics Market (€), Portugal, 2005 – 2015
Chart 15-2: Crowns and Bridges Market (€), Portugal, 2005 – 2015
Chart 15-3: Crowns and Bridges Segmented by Material Type, Portugal, 2008
Chart 15-4: Crowns and Bridges Unit Share by Material Type, Portugal, 2005 – 2015
Chart 15-5: Dentures Market (€), Portugal, 2005 – 2015
Chart 15-6: CAD/CAM Systems Market (€), Portugal, 2005 - 2015
Chart 15-7: Full In-Lab CAD/CAM Systems Market, Portugal (€), 2005 – 2015
Chart 15-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Portugal, 2008
Chart 15-9: Market for Standalone Scanner CAD/CAM Systems, Portugal (€), 2005 – 2015
Chart 15-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Portugal, 2008
Chart 15-11: Chairside CAD/CAM Systems Market, Portugal (€), 2005 – 2015
Chart 15-12: Total Market Share of In-Lab CAD/CAM Systems, Portugal, 2008
Chart 15-13: Total Market Share of CAD/CAM Systems, Portugal, 2008
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Chart 16-2: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Chart 16-3: Crowns and Bridges Market Segmented by Material Type, Russian Federation, 2008
Chart 16-4: Crowns and Bridges Unit Share by Material Type, Russian Federation, 2005 – 2015
Chart 16-5: Dentures Market (€), Russian Federation, 2015 – 2015
Chart 16-6: CAD/CAM Systems Market (€), Russia, 2005 - 2015
Chart 16-7: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-9: Market for Standalone Scanner CAD/CAM Systems, Russia (€), 2005 – 2015
Chart 16-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-11: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-12: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Chart 16-13: Total Market Share of CAD/CAM Systems, Russia, 2008 600
EXECUTIVE SUMMARY
1.1 OVERVIEW: EUROPEAN AND RUSSIAN FEDERATION MARKETS FOR DENTAL PROSTHETICS
1.2 TREND ANALYSIS BY COUNTRY
1.3 TREND ANALYSIS BY SEGMENT
1.4 MARKET FOR CROWNS AND BRIDGES
1.5 MARKET FOR DENTURES
1.6 CAD/CAM MARKET
1.7 COMPETITIVE ANALYSIS
1.7.1 Leading Dental CAD/CAM Competitors
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
2.2.1 Step 1: Project Initiation & Team Selection
2.2.2 Step 2: Prepare Data Systems and Perform Secondary Research
2.2.3 Step 3: Preparation for Interviews & Questionnaire Design
2.2.4 Step 4: Performing Primary Research
2.2.5 Step 5: Research Analysis: Establishing Baseline Estimates
2.2.6 Step 6: Market Forecast and Analysis
2.2.7 Step 7: Identify Strategic Opportunities
2.2.8 Step 8: Final Review and Market Release
2.2.9 Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 STATISTICS ON DENTAL HEALTH IN EUROPE AND THE RUSSIAN FEDERATION
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.3 Material Types
3.3 INLAYS AND ONLAYS
3.3.1 Material Types
3.4 DENTURES
3.4.1 Full Dentures
3.4.2 Partial Dentures
3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.5.1 Conventional Fabrication
3.5.2 CAD/CAM Technology
3.5.3 Three-Dimensional Printing
3.5.4 Digital Impression-Taking
EUROPEAN AND RUSSIAN FEDERATION MARKET FOR DENTAL PROSTHETICS
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET ANALYSIS AND FORECAST
4.4 MARKET BY SEGMENT
4.4.1 Market for Crowns and Bridges
4.4.2 Market for Dentures
4.4.3 Market for CAD/CAM Systems
4.4.4 Chairside Systems
4.4.5 Competitive Analysis
4.5 MERGERS AND ACQUISITIONS
4.5.1 3M Acquired Brontes Technologies Inc
4.5.2 Straumann Acquired Etkon AG
4.6 MARKET HIGHLIGHTS
4.6.1 Nobel Biocare’s Acquisition of BioCAD and Alliance with Optimet
4.6.2 Wieland’s Introduction of ZENOTEC T1 Milling System
4.6.3 Sirona Releases Own Digital Impression Taking System – CEREC Bluecam
4.6.4 3M Lava Chairside Oral Scanner (C.O.S.)
COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 Median Age
5.1.3 GDP Per Capita
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
5.1.5 Price Index
5.2 EUROPEAN DENTAL PROSTHETICS PER CAPITA SUMMARY
5.3 GERMANY
5.4 FRANCE
5.5 ITALY
5.6 U.K
5.7 SPAIN
5.8 BENELUX
5.9 SCANDINAVIA
5.10 SWITZERLAND
5.11 AUSTRIA
5.12 PORTUGAL
5.13 RUSSIA
5.14 DENTISTS PER POPULATION
GERMAN MARKET FOR DENTAL PROSTHETICS
6.1 INTRODUCTION
6.2 MARKET OVERVIEW FOR PROSTHETICS DEVICES
6.2.1 Market Analysis and Forecast
6.3 MARKET DRIVERS AND LIMITERS
6.3.1 Market Drivers
6.3.2 Market Limiters
6.4 MARKET FOR CROWNS AND BRIDGES
6.4.1 Market Analysis and Forecast
6.4.2 PFM Market
6.4.3 Full-Cast Market
6.4.4 All-Ceramic Market
6.5 MARKET FOR DENTURES
6.5.1 Market Analysis and Forecast
6.5.2 Market for Full Dentures
6.5.3 Market for Partial Dentures
6.6 MARKET FOR CAD/CAM SYSTEMS
6.6.1 Market Analysis and Forecast
6.7 MARKET DRIVERS AND LIMITERS
6.7.1 Market Drivers
6.7.2 Market Limiters
6.7.3 Full In-Lab CAD/CAM Systems
6.7.4 Standalone Scanner CAD/CAM Systems
6.7.5 Chairside Systems
6.7.6 Competitive Analysis
FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
7.1 INTRODUCTION
7.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
7.2.1 Market Analysis and Forecast
7.3 MARKET DRIVERS AND LIMITERS
7.3.1 Market Drivers
7.3.2 Market Limiters
7.4 MARKET FOR CROWNS AND BRIDGES
7.4.1 Market Analysis and Forecast
7.4.2 Porcelain-Fused-To-Metal
7.4.3 Full-Cast Market
7.4.4 All-Ceramic Market
7.5 MARKET FOR DENTURES
7.5.1 Market Analysis and Forecast
7.5.2 Market for Full Dentures
7.5.3 Market for Partial Dentures
7.6 MARKET FOR CAD/CAM SYSTEMS
7.6.1 Market Analysis and Forecast
7.7 MARKET DRIVERS AND LIMITERS
7.7.1 Market Drivers
7.7.2 Market Limiters
7.7.3 Full In-Lab CAD/CAM Systems
7.7.4 Standalone Scanner CAD/CAM Systems
7.7.5 Chairside Systems
7.8 COMPETITIVE ANALYSIS
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
8.1 INTRODUCTION
8.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
8.2.1 Market Analysis and Forecast
8.3 MARKET DRIVERS AND LIMITERS
8.3.1 Market Drivers
8.3.2 Market Limiters
8.4 MARKET FOR CROWNS AND BRIDGES
8.4.1 Market Analysis and Forecast
8.4.2 Porcelain-Fused-To-Metal Market
8.4.3 Full-Cast Market
8.4.4 All-Ceramic Market
8.5 MARKET FOR DENTURES
8.5.1 Market Analysis and Forecast
8.5.2 Market for Full Dentures
8.5.3 Market for Partial Dentures
8.6 MARKET FOR CAD/CAM SYSTEMS
8.6.1 Market Analysis and Forecast
8.7 MARKET DRIVERS AND LIMITERS
8.7.1 Market Drivers
8.7.2 Market Limiters
8.7.3 Full In-Lab CAD/CAM Systems
8.7.4 Standalone Scanner CAD/CAM Systems
8.7.5 Chairside Systems
8.8 COMPETITIVE ANALYSIS
U.K MARKET FOR DENTAL PROSTHETICS
9.1 INTRODUCTION
9.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
9.2.1 Market Analysis and Forecast
9.3 MARKET DRIVERS AND LIMITERS
9.3.1 Market Drivers
9.3.2 Market Limiters
9.4 MARKET FOR CROWNS AND BRIDGES
9.4.1 Market Analysis and Forecast
9.4.2 Porcelain-Fused-To-Metal Market
9.4.3 Full-Cast Market
9.4.4 All-Ceramic Market
9.5 MARKET FOR DENTURES
9.5.1 Market Analysis and Forecast
9.5.2 Market for Full Dentures
9.5.3 Market for Partial Dentures
9.6 MARKET FOR CAD/CAM SYSTEMS
9.6.1 Market Analysis and Forecast
9.7 MARKET DRIVERS AND LIMITERS
9.7.1 Market Drivers
9.7.2 Market Limiters
9.7.3 Full In-Lab CAD/CAM Systems
9.7.4 Standalone Scanner CAD/CAM Systems
9.7.5 Chairside Systems
9.8 COMPETITIVE ANALYSIS
SPANISH MARKET FOR DENTAL PROSTHETICS
10.1 INTRODUCTION
10.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
10.2.1 Market Analysis and Forecast
10.3 MARKET DRIVERS AND LIMITERS
10.3.1 Market Drivers
10.3.2 Market Limiters
10.4 MARKET FOR CROWNS AND BRIDGES
10.4.1 Market Analysis and Forecast
10.4.2 Porcelain-Fused-to-Metal Market
10.4.3 Full-Cast Market
10.4.4 All-Ceramic Market
10.5 MARKET FOR DENTURES
10.5.1 Market Analysis and Forecast
10.5.2 Market for Full Dentures
10.5.3 Market for Partial Dentures
10.6 MARKET FOR CAD/CAM SYSTEMS
10.6.1 Market Analysis and Forecast
10.7 MARKET DRIVERS AND LIMITERS
10.7.1 Market Drivers
10.7.2 Market Limiters
10.7.3 Full In-Lab CAD/CAM Systems
10.7.4 Standalone Scanner CAD/CAM Systems
10.7.5 Chairside Systems
10.8 COMPETITIVE ANALYSIS
BENELUXIAN MARKET FOR DENTAL PROSTHETICS
11.1 INTRODUCTION
11.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
11.2.1 Market Analysis and Forecast
11.3 MARKET DRIVERS AND LIMITERS
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 MARKET FOR CROWNS AND BRIDGES
11.4.1 Market Analysis and Forecast
11.4.2 Porcelain-Fused-To-Metal Market
11.4.3 Full-Cast Market
11.4.4 All-Ceramic Market
11.5 MARKET FOR DENTURES
11.5.1 Market Analysis and Forecast
11.5.2 Market for Full Dentures
11.5.3 Market for Partial Dentures
11.6 MARKET FOR CAD/CAM SYSTEMS
11.6.1 Market Analysis and Forecast
11.7 MARKET DRIVERS AND LIMITERS
11.7.1 Market Drivers
11.7.2 Market Limiters
11.7.3 Full In-Lab CAD/CAM Systems
11.7.4 Standalone Scanner CAD/CAM Systems
11.7.5 Chairside Systems
11.8 COMPETITIVE ANALYSIS
SCANDINAVIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
12.1 INTRODUCTION
12.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
12.2.1 Market Analysis and Forecast
12.2.2 Market Drivers
12.2.3 Market Limiters
12.3 MARKET FOR CROWNS AND BRIDGES
12.3.1 Market Analysis and Forecast
12.3.2 Porcelain-Fused-To-Metal Market
12.3.3 Full-Cast Market
12.3.4 All-Ceramic Market
12.4 MARKET FOR DENTURES
12.4.1 Market Analysis and Forecast
12.4.2 Market for Full Dentures
12.4.3 Market for Partial Dentures
12.5 MARKET FOR CAD/CAM SYSTEMS
12.5.1 Market Analysis and Forecast
12.6 MARKET DRIVERS AND LIMITERS
12.6.1 Market Drivers
12.6.2 Market Limiters
12.6.3 Full In-Lab CAD/CAM Systems
12.6.4 Standalone Scanner CAD/CAM Systems
12.6.5 Chairside Systems
12.7 COMPETITIVE ANALYSIS
SWISS MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
13.1 INTRODUCTION
13.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
13.2.1 Market Analysis and Forecast
13.2.2 Market Drivers
13.2.3 Market Limiters
13.3 MARKET FOR CROWNS AND BRIDGES
13.3.1 Market Analysis and Forecast
13.3.2 Porcelain-Fused-To-Metal Market
13.3.3 Full-Cast Market
13.3.4 All-Ceramic Market
13.4 MARKET FOR DENTURES
13.4.1 Market Analysis and Forecast
13.4.2 Market for Full Dentures
13.4.3 Market for Partial Dentures
13.5 MARKET FOR CAD/CAM SYSTEMS
13.5.1 Market Analysis and Forecast
13.6 MARKET DRIVERS AND LIMITERS
13.6.1 Market Drivers
13.6.2 Market Limiters
13.6.3 Full In-Lab CAD/CAM Systems
13.6.4 Standalone Scanner CAD/CAM Systems
13.6.5 Chairside Systems
13.7 COMPETITIVE ANALYSIS
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
14.1 INTRODUCTION
14.2 MARKET OVERVIEW
14.2.1 Market Analysis and Forecast
14.2.2 Market Drivers
14.2.3 Market Limiters
14.3 MARKET FOR CROWNS AND BRIDGES
14.3.1 Market Analysis and Forecast
14.3.2 Porcelain-Fused-To-Metal Market
14.3.3 Full-Cast Market
14.3.4 All-Ceramic Market
14.4 MARKET FOR DENTURES
14.4.1 Market Analysis and Forecast
14.4.2 Market for Full Dentures
14.4.3 Market for Partial Dentures
14.5 MARKET FOR CAD/CAM SYSTEMS
14.5.1 Market Analysis and Forecast
14.6 MARKET DRIVERS AND LIMITERS
14.6.1 Market Drivers
14.6.2 Market Limiters
14.6.3 Full In-Lab CAD/CAM Systems
14.6.4 Standalone Scanner CAD/CAM Systems
14.6.5 Chairside Systems
14.7 COMPETITIVE ANALYSIS
PORTUGUESE MARKET FOR DENTAL PROSTHETICS
15.1 INTRODUCTION
15.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
15.2.1 Market Analysis and Forecast
15.2.2 Market Drivers
15.2.3 Market Limiters
15.3 MARKET FOR CROWNS AND BRIDGES
15.3.1 Market Analysis and Forecast
15.3.2 Porcelain-Fused-to-Metal Market
15.3.3 Full-Cast Market
15.3.4 All-Ceramic Market
15.4 MARKET FOR DENTURES
15.4.1 Market Analysis and Forecast
15.4.2 Market for Full Dentures
15.4.3 Market for Partial Dentures
15.5 MARKET FOR CAD/CAM SYSTEMS
15.5.1 Market Analysis and Forecast
15.6 MARKET DRIVERS AND LIMITERS
15.6.1 Market Drivers
15.6.2 Market Limiters
15.6.3 Full In-Lab CAD/CAM Systems
15.6.4 Standalone Scanner CAD/CAM Systems
15.6.5 Chairside Systems
15.7 COMPETITIVE ANALYSIS
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
16.1 INTRODUCTION
16.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
16.2.1 Market Analysis and Forecast
16.2.2 Market Drivers
16.2.3 Market Limiters
16.3 MARKET FOR CROWNS AND BRIDGES
16.3.1 Market Analysis and Forecast
16.3.2 Porcelain-Fused-To-Metal Market
16.3.3 Full-Cast Market
16.3.4 All-Ceramic Market
16.4 MARKET FOR DENTURES
16.4.1 Market Analysis and Forecast
16.4.2 Market for Full Dentures
16.4.3 Market for Partial Dentures
16.5 MARKET FOR CAD/CAM SYSTEMS
16.5.1 Market Analysis and Forecast
16.6 MARKET DRIVERS AND LIMITERS
16.6.1 Market Drivers
16.6.2 Market Limiters
16.6.3 Full In-Lab CAD/CAM Systems
16.6.4 Standalone Scanner CAD/CAM Systems
16.6.5 Chairside Systems
16.7 COMPETITIVE ANALYSIS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
EUROPEAN AND RUSSIAN FEDERATION MARKET FOR DENTAL PROSTHETICS
Figure 4-1: Exchanges Rates for the Euro (€), 2008
Figure 4-2: European Market for Dental Prosthetics (€), 2005 – 2015
Figure 4-3: European Market for Dental Prosthetics (US$), 2005 – 2015
Figure 4-4: Crown and Brdige Units Segmented by Material Type, Europe, 2005 – 2015
Figure 4-5: European Market for Crowns and Bridges (€), 2005 – 2015
Figure 4-6: European Market for Crowns and Bridges (US$), 2005 – 2015
Figure 4-7: Denture Units Segmented by Material Type, Europe, 2005 – 2015
Figure 4-8: Dentures Market (€), Europe 2005 – 2015
Figure 4-9: Dentures Market (US$), Europe, 2005 – 2015
Figure 4-10: CAD/CAM Systems Market (€), Europe, 2005 - 2015
Figure 4-11: Full In-Lab CAD/CAM Systems Market, Europe (€), 2005 – 2015
Figure 4-12: Full In-Lab CAD/CAM Systems Market, Europe (US$), 2005 – 201543
Figure 4-13: Market for Standalone Scanner In-Lab CAD/CAM Systems, Europe (€), 2005 – 2015
Figure 4-14: Market for Standalone Scanner In-Lab CAD/CAM Systems, Europe (US$), 2005 – 2015
Figure 4-15: Chairside CAD/CAM Systems Market, Europe (€), 2005 – 2015
Figure 4-16: Chairside CAD/CAM Systems Market, Europe ($), 2005 – 2015
Figure 4-17: Total Market Share of In-Lab CAD/CAM Systems, Europe, 2008
Figure 4-18: Total Market Share of CAD/CAM Systems, Europe, 2008
COUNTRY PROFILES
Figure 5-1: Price Index, Europe, 2008
Figure 5-2: Country Indicators, Europe, 2008
Figure 5-3: Population per Dentist, 2008
GERMAN MARKET FOR DENTAL PROSTHETICS
Figure 6-1: Dental Prosthetics Market (€), Germany, 2005 – 2015
Figure 6-2: Dental Prosthetics Market (US$), Germany, 2005–2015
Figure 6-3: Market Drivers and Limiters for Dental Prosthetics, Germany, 2008
Figure 6-4: Crowns and Bridges Market (€), Germany, 2005 – 2015
Figure 6-5: Crowns and Bridges Market (US$), Germany, 2005–2015
Figure 6-6: Crowns and Bridges Market Segmented by Material Type, Germany, 2005–2015
Figure 6-7: PFM Devices Market (€), Germany, 2005–2015
Figure 6-8: PFM Devices Market (US$), Germany, 2005–2015
Figure 6-9: Full-Cast Devices Market (€), Germany, 2005–2015
Figure 6-10: Full-Cast Devices Market (US$), Germany, 2005–2015
Figure 6-11: All-Ceramic Devices Market (€), Germany, 2005–2015
Figure 6-12: All-Ceramic Devices Market (US$), Germany, 2005–2015
Figure 6-13: Dentures Segment by Type, Germany, 2005 – 2015
Figure 6-14: Dentures Market (€), Germany, 2005–2015
Figure 6-15: Dentures Market (US$), Germany, 2005–2015
Figure 6-16: Dentures Market Segmented by Type, Germany, 2005–2015
Figure 6-17: CAD/CAM Systems, Germany (€ and US$), 2005 – 2015
Figure 6-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 6-19: Full In-Lab CAD/CAM Systems Market, Germany (€), 2005 – 2015104
Figure 6-20: Full In-Lab CAD/CAM Systems Market, Germany (US$), 2005 – 2015
Figure 6-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Germany, 2008
Figure 6-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Germany (€), 2005 – 2015
Figure 6-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Germany (US$), 2005 – 2015
Figure 6-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Germany, 2008
Figure 6-25: Chairside CAD/CAM Systems Market, Germany (€), 2005 – 2015
Figure 6-26: Chairside CAD/CAM Systems Market, Germany ($), 2005 – 2015
Figure 6-27: Total Market Share of In-Lab CAD/CAM Systems, Germany, 2008118
Figure 6-28: Total Market Share of CAD/CAM Systems, Germany, 2008
FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS120
Figure 7-1: Dental Prosthetics Market (€), France, 2005 – 2015
Figure 7-2: Dental Prosthetics Market (US$), France, 2005 – 2015
Figure 7-3: Market Drivers and Limiters for Dental Prosthetics, France, 2007
Figure 7-4: Crowns and Bridges Market (€), France, 2005 – 2015
Figure 7-5: Crowns and Bridges Market (US$), France, 2005 – 2015
Figure 7-6: Crowns and Bridges Segmented by Material Type, France, 2005 – 2015
Figure 7-7: PFM Devices Market (€), France, 2005 – 2015
Figure 7-8: PFM Devices Market (US$), France, 2005 – 2015
Figure 7-9: Full-Cast Devices Market (€), France, 2005 – 2015
Figure 7-10: Full-Cast Devices Market (US$), France, 2004 – 2014
Figure 7-11: All-Ceramic Devices Market (€), France, 2005 – 2015
Figure 7-12: All-Ceramic Devices Market (US$), France, 2005 – 2015
Figure 7-13: Dentures Segmented by Type, France, 2005 – 2015
Figure 7-14: Dentures Market (€), France, 2005 – 2015
Figure 7-15: Dentures Market (US$), France, 2005 – 2015
Figure 7-16: Dentures Market Segmented by Type, France, 2005 – 2015
Figure 7-17: CAD/CAM Systems, France (€ and US$), 2005 – 2015
Figure 7-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 7-19: Full In-Lab CAD/CAM Systems Market, France (€), 2005 – 2015
Figure 7-20: Full In-Lab CAD/CAM Systems Market, France (US$), 2005 – 2015150
Figure 7-21: Leading Competitors, Full In-Lab CAD/CAM Systems, France, 2008153
Figure 7-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, France (€), 2005 – 2015
Figure 7-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, France (US$), 2005 – 2015
Figure 7-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, France, 2008
Figure 7-25: Chairside CAD/CAM Systems Market, France (€), 2005 – 2015
Figure 7-26: Chairside CAD/CAM Systems Market, France ($), 2005 – 2015
Figure 7-27: Total Market Share of In-Lab CAD/CAM Systems, France, 2008
Figure 7-28: Total Market Share of CAD/CAM Systems, France, 2008
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 8-1: Dental Prosthetics Market (€), Italy, 2005 – 2015
Figure 8-2: Dental Prosthetics Market (US$), Italy, 2005 – 2015
Figure 8-3: Market Drivers and Limiters for Dental Prosthetics, Italy, 2007
Figure 8-4: Crowns and Bridges Market (€), Italy, 2005 – 2015
Figure 8-5: Crowns and Bridges Market (US$), Italy, 2005 – 2015
Figure 8-6: Crowns and Bridges Segmented by Material Type, Italy, 2005 – 2015179
Figure 8-7: PFM Devices Market (€), Italy, 2005 – 2015
Figure 8-8: PFM Devices Market (US$), Italy, 2005 – 2015
Figure 8-9: Full-Cast Devices Market (€), Italy, 2005 – 2015
Figure 8-10: Full-Cast Devices Market (US$), Italy, 2005 – 2015
Figure 8-11: All-Ceramic Devices Market (€), Italy, 2005 – 2015
Figure 8-12: All-Ceramic Devices Market (US$), Italy, 2005 – 2015
Figure 8-13: Dentures Market by Type, Italy, 2005 – 2015
Figure 8-14: Dentures Market (€), Italy, 2005 – 2015
Figure 8-15: Dentures Market (US$), Italy, 2005 – 2015
Figure 8-16: Dentures Market Segmented by Type, Italy, 2004 – 2014
Figure 8-17: CAD/CAM Systems, Italy (€ and US$), 2005 – 2015
Figure 8-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 8-19: Full In-Lab CAD/CAM Systems Market, Italy (€), 2005 – 2015
Figure 8-20: Full In-Lab CAD/CAM Systems Market, Italy (US$), 2005 – 2015
Figure 8-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Italy, 2008
Figure 8-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Italy (€), 2005 – 2015
Figure 8-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Italy (US$), 2005 – 2015
Figure 8-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Italy, 2008
Figure 8-25: Chairside CAD/CAM Systems Market, Italy (€), 2005 – 2015
Figure 8-26: Chairside CAD/CAM Systems Market, Italy (US$), 2005 – 2015
Figure 8-27: Total Market Share of In-Lab CAD/CAM Systems, Italy, 2008
Figure 8-28: Total Market Share of CAD/CAM Systems, Italy, 2008
U.K MARKET FOR DENTAL PROSTHETICS
Figure 9-1: Dental Prosthetics Market (€), U.K., 2005 – 2015
Figure 9-2: Dental Prosthetics Market (?), U.K., 2005 – 2015
Figure 9-3: Dental Prosthetics Market (US$), U.K., 2005 – 2015
Figure 9-4: Market Drivers and Limiters for Dental Prosthetics, U.K., 2008
Figure 9-5: Crowns and Bridges Market (€), U.K., 2005 – 2015
Figure 9-6: Crowns and Bridges Market (US$), U.K., 2005 – 2015
Figure 9-7: Crowns and Bridges Market (?), U.K., 2005 – 2015
Figure 9-8: Crowns and Bridges Segmented by Material Type, U.K., 2005 – 2015226
Figure 9-9: PFM Devices Market (€), U.K., 2005 – 2015
Figure 9-10: PFM Devices Market (US$), U.K., 2005 – 2015
Figure 9-11: PFM Devices Market (?), U.K., 2005 – 2015
Figure 9-12: Full-Cast Devices Market (€), U.K., 2004 – 2014
Figure 9-13: Full-Cast Devices Market (US$), U.K., 2004 – 2014
Figure 9-14: Full-Cast Devices Market (?), U.K., 2004 – 2014
Figure 9-15 All-Ceramic Devices Market (€), U.K., 2005 – 2015
Figure 9-16: All-Ceramic Devices Market (US$), U.K., 2005 – 2015
Figure 9-17: All-Ceramic Devices Market (?), U.K., 2005 – 2015
Figure 9-18: Dentures Segment by Type, U.K., 2005 – 2015
Figure 9-19: Dentures Market (€), U.K., 2005 – 2015
Figure 9-20: Dentures Market (US$), U.K., 2005 – 2015
Figure 9-21: Dentures Market (?), U.K., 2005 – 2015
Figure 9-22: Dentures Market Segmented by Type, U.K., 2005 – 2015
Figure 9-23: CAD/CAM Systems, U.K (€, US$ and ?), 2005 – 2015
Figure 9-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 9-25: Full In-Lab CAD/CAM Systems Market, U.K (€), 2005 – 2015
Figure 9-26: Full In-Lab CAD/CAM Systems Market, U.K (US$), 2005 – 2015
Figure 9-27: Full In-Lab CAD/CAM Systems Market, U.K (?), 2005 – 2015
Figure 9-28: Leading Competitors, Full In-Lab CAD/CAM Systems, U.K., 2008
Figure 9-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, U.K. (€), 2005 – 2015
Figure 9-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, U.K. (US$), 2005 – 2015
Figure 9-31: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, U.K., 2008
Figure 9-32: Chairside CAD/CAM Systems Market, U.K (€), 2005 – 2015
Figure 9-33: Chairside CAD/CAM Systems Market, U.K ($), 2005 – 2015
Figure 9-34: Chairside CAD/CAM Systems Market, U.K (?), 2005 – 2015
Figure 9-35: Total Market Share of In-Lab CAD/CAM Systems, U.K., 2008
Figure 9-36: Total Market Share of CAD/CAM Systems, U.K., 2008
SPANISH MARKET FOR DENTAL PROSTHETICS
Figure 10-1: Dental Prosthetics Market (€), Spain, 2005 – 2015
Figure 10-2: Dental Prosthetics Market (US$), Spain, 2005 – 2015
Figure 10-3: Market Drivers and Limiters for Dental Prosthetics, Spain, 2007
Figure 10-4: Crowns and Bridges Market (€), Spain, 2005 – 2015
Figure 10-5: Crowns and Bridges Market (US$), Spain, 2005 – 2015
Figure 10-6: Crown and Bridges Segmented by Material Type, Spain, 2005 – 2015
Figure 10-7: PFM Devices Market (€), Spain, 2005 – 2015
Figure 10-8: PFM Devices Market (US$), Spain, 2005 – 2015
Figure 10-9: Full-Cast Devices Market (€), Spain, 2005 – 2015
Figure 10-10: Full-Cast Devices Market (US$), Spain, 2005 – 2015
Figure 10-11: All-Ceramic Devices Market (€), Spain, 2005 – 2015
Figure 10-12: All-Ceramic Devices Market (US$), Spain, 2005 – 2015
Figure 10-13: Dentures Segmented by Type, Spain, 2005 – 2015
Figure 10-14: Dentures Market (€), Spain, 2005 – 2015
Figure 10-15: Dentures Market (US$), Spain, 2005 – 2015
Figure 10-16: Dentures Market Segmented by Type, Spain, 2005 – 2015
Figure 10-17: CAD/CAM Systems, Spain (€ and US$), 2005 – 2015
Figure 10-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 10-19: Full In-Lab CAD/CAM Systems Market, Spain (€), 2005 – 2015
Figure 10-20: Full In-Lab CAD/CAM Systems Market, Spain (US$), 2005 – 2015293
Figure 10-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Spain, 2008296
Figure 10-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Spain (€), 2005 – 2015
Figure 10-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Spain (US$), 2005 – 2015
Figure 10-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Spain, 2008
Figure 10-25: Chairside CAD/CAM Systems Market, Spain (€), 2005 – 2015
Figure 10-26: Chairside CAD/CAM Systems Market, Spain (US$), 2005 – 2015
Figure 10-27: Total Market Share of In-Lab CAD/CAM Systems, Spain, 2008
Figure 10-28: Total Market Share of CAD/CAM Systems, Spain, 2008
BENELUXIAN MARKET FOR DENTAL PROSTHETICS
Figure 11-1: Dental Prosthetics Market (€), Benelux, 2005 – 2015
Figure 11-2: Dental Prosthetics Market (US$), Benelux, 2005 – 2015
Figure 11-3: Market Drivers and Limiters for Dental Prosthetics, Benelux, 2007
Figure 11-4: Crowns and Bridges Market (€), Benelux, 2005 – 2015
Figure 11-5: Crowns and Bridges Market (US$), Benelux, 2005 – 2015
Figure 11-6: Crown and Bridges Segmented by Material Type, Benelux, 2005 – 2015
Figure 11-7: PFM Devices Market (€), Benelux, 2005 – 2015
Figure 11-8 PFM Devices Market (US$), Benelux, 2005 – 2015
Figure 11-9: Full-Cast Devices Market (€), Benelux, 2005 – 2015
Figure 11-10: Full-Cast Devices Market (US$), Benelux, 2005 – 2015
Figure 11-11: All-Ceramic Devices Market (€), Benelux, 2005 – 2015
Figure 11-12: All-Ceramic Devices Market (US$), Benelux, 2005 – 2015
Figure 11-13: Dentures Segmented by Type, Benelux, 2005 – 2015
Figure 11-14: Dentures Market (€), Benelux, 2005 – 2015
Figure 11-15: Dentures Market (US$), Benelux, 2005 – 2015
Figure 11-16: Dentures Market Segmented by Type, Benelux, 2005 – 2015
Figure 11-17: CAD/CAM Systems, Benelux (€ and US$), 2005 – 2015
Figure 11-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 11-19: Full In-Lab CAD/CAM Systems Market, Benelux (€), 2005 – 2015338
Figure 11-20: Full In-Lab CAD/CAM Systems Market, Benelux (US$), 2005 – 2015
Figure 11-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Benelux, 2008
Figure 11-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Benelux (€), 2005 – 2015
Figure 11-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Benelux (US$), 2005 – 2015
Figure 11-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Benelux, 2008
Figure 11-25: Chairside CAD/CAM Systems Market, Benelux (€), 2005 – 2015
Figure 11-26: Chairside CAD/CAM Systems Market, Benelux (US$), 2005 – 2015
Figure 11-27: Total Market Share of In-Lab CAD/CAM Systems, Benelux, 2008352
Figure 11-28: Total Market Share of CAD/CAM Systems, Benelux, 2008
SCANDINAVIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 12-1: Dental Prosthetics Market (€), Scandinavia, 2005 – 2015
Figure 12-2: Dental Prosthetics Market (US$), Scandinavia, 2005 – 2015
Figure 12-3: Market Drivers and Limiters for Dental Prosthetics, Scandinavia, 2008
Figure 12-4: Crowns and Bridges Market (€), Scandinavia, 2005 – 2015
Figure 12-5: Crowns and Bridges Market (US$), Scandinavia, 2005 – 2015
Figure 12-6: Crowns and Bridges Market Segmented by Material Type, Scandinavia, 2005 – 2015
Figure 12-7: PFM Devices Market (€), Scandinavia, 2005 – 2015
Figure 12-8: PFM Devices Market (US$), Scandinavia, 2005 – 2015
Figure 12-9: Full-Cast Devices Market (€), Scandinavia, 2005 – 2015
Figure 12-10: Full-Cast Devices Market (US$), Scandinavia, 2005 – 2015
Figure 12-11: All-Ceramic Devices Market (€), Scandinavia, 2005 – 2015
Figure 12-12: All-Ceramic Devices Market (US$), Scandinavia, 2005 – 2015
Figure 12-13: Dentures Market Segmented by Type, Scandinavia, 2005 – 2015
Figure 12-14: Dentures Market (€), Scandinavia, 2005 – 2015
Figure 12-15: Dentures Market (US$), Scandinavia, 2005 – 2015
Figure 12-16: Dentures Segmented by Type, Scandinavia, 2005 – 2015
Figure 12-17: CAD/CAM Systems, Scandinavia (€ and US$), 2005 – 2015
Figure 12-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 12-19: Full In-Lab CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Figure 12-20: Full In-Lab CAD/CAM Systems Market, Scandinavia (US$), 2005 – 2015
Figure 12-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Scandinavia, 2008
Figure 12-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Scandinavia (€), 2005 – 2015
Figure 12-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Scandinavia (US$), 2005 – 2015
Figure 12-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Scandinavia, 2008
Figure 12-25: Chairside CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Figure 12-26: Chairside CAD/CAM Systems Market, Scandinavia (US$), 2005 – 2015
Figure 12-27: Total Market Share of In-Lab CAD/CAM Systems, Scandinavia, 2008
Figure 12-28: Total Market Share of CAD/CAM Systems, Scandinavia, 2008
SWISS MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 13-1: Dental Prosthetics Market (€), Switzerland, 2005 – 2015
Figure 13-2: Dental Prosthetics Market (US$), Switzerland, 2005 – 2015
Figure 13-3: Dental Prosthetics Market (CHF), Switzerland, 2005 – 2015
Figure 13-4: Market Drivers and Limiters for Dental Prosthetics, Switzerland, 2008
Figure 13-5: Crowns and Bridges Market (€), Switzerland, 2005 – 2015
Figure 13-6: Crowns and Bridges Market (US$), Switzerland, 2005 – 2015
Figure 13-7: Crowns and Bridges Market (CHF), Switzerland, 2005 – 2015
Figure 13-8: Crowns and Bridges Segmented by Material Type, Switzerland, 2005 – 2015
Figure 13-9: PFM Devices Market (€), Switzerland, 2005 – 2015
Figure 13-10: PFM Devices Market (US$), Switzerland, 2005 – 2015
Figure 13-11: PFM Devices Market (CHF), Switzerland, 2005 – 2015
Figure 13-12: Full-Cast Devices Market (€), Switzerland, 2005 – 2015
Figure 13-13: Full-Cast Devices Market (US$), Switzerland, 2005 – 2015
Figure 13-14: Full-Cast Devices Market (CHF), Switzerland, 2005 – 2015
Figure 13-15: All-Ceramic Devices Market (€), Switzerland, 2005 – 2015
Figure 13-16: All-Ceramic Devices Market (US$), Switzerland, 2005 – 2015
Figure 13-17: All-Ceramic Devices Market (CHF), Switzerland, 2005 – 2015
Figure 13-18: Dentures Segmented by Type, Switzerland, 2005 – 2015
Figure 13-19: Dentures Market (€), Switzerland, 2005 – 2015
Figure 13-20: Dentures Market (US$), Switzerland, 2005 – 2015
Figure 13-21: Dentures Market (CHF), Switzerland, 2005 – 2015
Figure 13-22: Dentures Segmented by Type, Switzerland, 2005 – 2015
Figure 13-23: CAD/CAM Systems, Switzerland (€, US$ and CHF), 2005 – 2015429
Figure 13-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 13-25: Full In-Lab CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Figure 13-26: Full In-Lab CAD/CAM Systems Market, Switzerland (US$), 2005 – 2015
Figure 13-27: Full In-Lab CAD/CAM Systems Market, Switzerland (CHF), 2005 – 2015
Figure 13-28: Leading Competitors, Full In-Lab CAD/CAM Systems, Switzerland, 2008
Figure 13-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, Switzerland (€), 2005 – 2015
Figure 13-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, Switzerland (US$), 2005 – 2015
Figure 13-31: Market for Standalone Scanner In-Lab CAD/CAM Systems, Switzerland (CHF), 2005 – 2015
Figure 13-32: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Switzerland, 2008
Figure 13-33: Chairside CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Figure 13-34: Chairside CAD/CAM Systems Market, Switzerland (US$), 2005 – 2015
Figure 13-35: Chairside CAD/CAM Systems Market, Switzerland (CHF), 2005 – 2015
Figure 13-36: Total Market Share of In-Lab CAD/CAM Systems, Switzerland, 2008
Figure 13-37: Total Market Share of CAD/CAM Systems, Switzerland, 2008
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 14-1: Dental Prosthetics Market (€), Austria, 2005 – 2015
Figure 14-2: Dental Prosthetics Market (US$), Austria, 2005 – 2015
Figure 14-3: Market Drivers and Limiters for Dental Prosthetics, Austria, 2007
Figure 14-4: Crowns and Bridges Market (€), Austria, 2005 – 2015
Figure 14-5: Crowns and Bridges Market (US$), Austria, 2005 – 2015Error! Bookmark not define
Figure 14-6: Crowns and Bridges Segmented by Material Type, Austria, 2005 – 2015
Figure 14-7: PFM Devices Market (€), Austria, 2005 – 2015
Figure 14-8: PFM Devices Market (US$), Austria, 2005 – 2015
Figure 14-9: Full-Cast Devices Market (€), Austria, 2005 – 2015
Figure 14-10: Full-Cast Devices Market (US$), Austria, 2005 – 2015
Figure 14-11: All-Ceramic Devices Market (€), Austria, 2005 – 2015
Figure 14-12: All-Ceramic Devices Market (US$), Austria, 2005 – 2015
Figure 14-13: Dentures Segmented by Type, Austria, 2008
Figure 14-14: Dentures Market (€), Austria, 2005 – 2015
Figure 14-15: Dentures Market (US$), Austria, 2005 – 2015
Figure 14-16: Dentures Segmented by Type, Austria, 2005 – 2015
Figure 14-17: CAD/CAM Systems, Austria (€ and US$), 2005 – 2015
Figure 14-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 14-19: Full In-Lab CAD/CAM Systems Market, Austria (€), 2005 – 2015485
Figure 14-20: Full In-Lab CAD/CAM Systems Market, Austria (US$), 2005 – 2015
Figure 14-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Austria, 2008
Figure 14-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Austria (€), 2005 – 2015
Figure 14-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Austria (US$), 2005 – 2015
Figure 14-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Austria, 2008
Figure 14-25: Chairside CAD/CAM Systems Market, Austria (€), 2005 – 2015
Figure 14-26: Chairside CAD/CAM Systems Market, Austria (US$), 2005 – 2015495
Figure 14-27: Total Market Share of In-Lab CAD/CAM Systems, Austria, 2008
Figure 14-28: Total Market Share of CAD/CAM Systems, Austria, 2008
PORTUGUESE MARKET FOR DENTAL PROSTHETICS
Figure 15-1: Dental Prosthetics Market (€), Portugal, 2005 – 2015
Figure 15-2: Dental Prosthetics Market (US$), 2005 – 2015
Figure 15-3: Market Drivers and Limiters for Dental Prosthetics, Portugal, 2007508
Figure 15-4: Crowns and Bridges Market (€), Portugal, 2005 – 2015
Figure 15-5: Crowns and Bridges Market (US$), Portugal, 2005 – 2015
Figure 15-6: Crown and Bridges Segmented by Material Type, Portugal, 2005 – 2015
Figure 15-7: PFM Devices Market (€), Portugal, 2005 – 2015
Figure 15-8: PFM Devices Market (US$), Portugal, 2005 – 2015
Figure 15-9: Full-Cast Devices Market (€), Portugal, 2005 – 2015
Figure 15-10: Full-Cast Devices Market (US$), Portugal, 2005 – 2015
Figure 15-11: All-Ceramic Devices Market (€), Portugal, 2005 – 2015
Figure 15-12: All-Ceramic Devices Market (US$), 2005 – 2015
Figure 15-13: Dentures Segmented by Type, Portugal, 2005 – 2015
Figure 15-14: Dentures Market (€), Portugal, 2005 – 2015
Figure 15-15: Dentures Market (US$), Portugal, 2005 – 2015
Figure 15-16: Dentures Segmented by Type, Portugal, 2005 – 2015
Figure 15-17: CAD/CAM Systems, Portugal (€ and US$), 2005 – 2015
Figure 15-18: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 15-19: Full In-Lab CAD/CAM Systems Market, Portugal (€), 2005 – 2015530
Figure 15-20: Full In-Lab CAD/CAM Systems Market, Portugal (US$), 2005 – 2015
Figure 15-21: Leading Competitors, Full In-Lab CAD/CAM Systems, Portugal, 2008
Figure 15-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Portugal (€), 2005 – 2015
Figure 15-23: Market for Standalone Scanner In-Lab CAD/CAM Systems, Portugal (US$), 2005 – 2015
Figure 15-24: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Portugal, 2008
Figure 15-25: Chairside CAD/CAM Systems Market, Portugal (€), 2005 – 2015
Figure 15-26: Chairside CAD/CAM Systems Market, Portugal (US$), 2005 – 2015
Figure 15-27: Total Market Share of In-Lab CAD/CAM Systems, Portugal, 2008544
Figure 15-28: Total Market Share of CAD/CAM Systems, Portugal, 2008
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Figure 16-2: Dental Prosthetics Market (US$), Russian Federation, 2005 – 2015551
Figure 16-3: Dental Prosthetics Market (RUB), Russian Federation, 2005 – 2015552
Figure 16-4: Market Drivers and Limiters for Dental Prosthetics, Russian Federation, 2008
Figure 16-5: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Figure 16-6: Crowns and Bridges Market (US$), Russian Federation, 2005 – 2015557
Figure 16-7: Crowns and Bridges Market (RUB), Russian Federation, 2005 – 2015
Figure 16-8: Crowns and Bridges Segmented by Material Type, Russian Federation, 2005 – 2015
Figure 16-9: PFM Devices Market (€), Russian Federation 2005 – 2015
Figure 16-10: PFM Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-11: PFM Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-12: Full-Cast Devices Market (€), Russian Federation, 2005 – 2015
Figure 16-13: Full-Cast Devices Market (US$), Russian Federation, 2005 – 2015567
Figure 16-14: Full-Cast Devices Market (RUB), Russian Federation, 2005 – 2015567
Figure 16-15: All-Ceramic Devices Market (€), Russian Federation, 2005 – 2015569
Figure 16-16: All-Ceramic Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-17: All-Ceramic Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-18: Dentures Segmented by Type, Russian Federation, 2005 – 2015
Figure 16-19: Dentures Market (€), Russian Federation, 2005 – 2015
Figure 16-20: Dentures Market (US$), Russian Federation, 2005 – 2015
Figure 16-21: Dentures Market (RUB), Russian Federation, 2005 – 2015
Figure 16-22: Dentures Segmented By Type, Russian Federation, 2005 – 2015
Figure 16-23: CAD/CAM Systems, Russia (€, US$, RUB), 2005 – 2015
Figure 16-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 16-25: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-26: Full In-Lab CAD/CAM Systems Market, Russia (US$), 2005 – 2015
Figure 16-27: Full In-Lab CAD/CAM Systems Market, Russia (RUB), 2005 – 2015
Figure 16-28: Leading Competitors, Full In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (€), 2005 – 2015
Figure 16-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (US$), 2005 – 2015
Figure 16-31: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (RUB), 2005 – 2015
Figure 16-32: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-33: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-34: Chairside CAD/CAM Systems Market, Russia (US$), 2005 – 2015594
Figure 16-35: Chairside CAD/CAM Systems Market, Russia (US$), 2005 – 2015595
Figure 16-36: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-37: Total Market Share of CAD/CAM Systems, Russia, 2008
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market (€), Europe, 2005 – 2015
Chart 1-2: Market Value of Dental Prosthetics by Country, 20008
Chart 1-3: Full-Cast Crowns and Bridges Market (€), Europe, 2005 – 2015
Chart 1-4: Unit Share by Material Type for Crowns and Bridges, Europe, 2008
Chart 1-5: Dentures Market (€), Europe, 2005 – 2015
Chart 1-6: CAD/CAM Systems Market (€), Europe, 2005 – 2015
Chart 1-7: Market Share for In-Lab CAD/CAM Systems, Europe, 2008
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
EUROPEAN AND RUSSIAN FEDERATION MARKET FOR DENTAL
PROSTHETICS
Chart 4-1: Combined European Market for Dental Prosthetics (€), 2005 – 2015
Chart 4-2: Crown and Bridge Units Segmented by Material Type, Europe, 2005 – 2015
Chart 4-3: European Market for Crowns and Bridges, (€), 2005 – 2015
Chart 4-4: Dentures Market (€), Europe, 2005 – 2015
Chart 4-5: Overall CAD/CAM Market (€), Europe, 2005 – 2015
Chart 4-6: Full In-Lab CAD/CAM Systems Market, (€) Europe, 2005 – 2015
Chart 4-7: Market for Standalone Scanner CAD/CAM Systems, Europe (€), 2005 – 2015
Chart 4-8: Chairside CAD/CAM Systems Market, Europe (€), 2005 – 2015
Chart 4-9: Total Market Share of In-Lab CAD/CAM Systems, Europe, 2008
Chart 4-10: Total Market Share of CAD/CAM Systems, Europe, 2008
COUNTRY PROFILES
Chart 5-1: Country Statistics, Germany, 2008
Chart 5-2: Country Statistics, France, 2008
Chart 5-3: Country Statistics, Italy, 2008
Chart 5-4: Country Statistics, U.K., 2008
Chart 5-5: Country Statistics, Spain, 2008
Chart 5-6: Country Statistics, Benelux, 2008
Chart 5-7: Country Statistics, Scandinavia, 2008
Chart 5-8: Country Statistics, Switzerland, 2008
Chart 5-9: Country Statistics, Austria, 2008
Chart 5-10: Country Statistics, Portugal, 2008
Chart 5-11: Country Statistics, Russia, 2008
GERMAN MARKET FOR DENTAL PROSTHETICS
Chart 6-1: Dental Prosthetics Market (€), Germany, 2005–2015
Chart 6-2: Crowns and Bridges Market (€), Germany, 2005–2015
Chart 6-3: Crowns and Bridges Market Segmented by Material Type, Germany, 2008
Chart 6-4: Crowns and Bridges Unit Share by Material Type, Germany, 2005– 2015
Chart 6-5: Dentures Market (€), Germany, 2005–2015
Chart 6-6: CAD/CAM Systems Market (€), Germany, 2005 – 2015
Chart 6-7: Full In-Lab CAD/CAM Systems Market, (€) 2005 – 2015
Chart 6-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Germany, 2008
Chart 6-9: Market for Standalone Scanner CAD/CAM Systems, Germany (€), 2005 – 2015
Chart 6-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Germany, 2008
Chart 6-11: Chairside CAD/CAM Systems Market, Germany (€), 2005 – 2015
Chart 6-12: Total Market Share of In-Lab CAD/CAM Systems, Germany, 2008
Chart 6-13: Total Market Share of CAD/CAM Systems, Germany, 2008
FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 7-1: Dental Prosthetics Market (€), France, 2005 – 2015
Chart 7-2: Crowns and Bridges Market (€), France, 2005 – 2015
Chart 7-3: Crowns and Bridges Segmented by Material Type, France, 2008
Chart 7-4: Crowns and Bridges Unit Share by Material Type, France, 2005 – 2015
Chart 7-5: Dentures Market (€), France, 2005 – 2015
Chart 7-6: CAD/CAM Systems Market (€), France, 2005 - 2015
Chart 7-7: Full In-Lab CAD/CAM Systems Market, France (€), 2005 – 2015
Chart 7-8: Leading Competitors, Full In-Lab CAD/CAM System Units, France, 2008
Chart 7-9: Market for Standalone Scanner CAD/CAM Systems, France (€), 2005 – 2015
Chart 7-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, France, 2008
Chart 7-11: Chairside CAD/CAM Systems Market, France (€), 2005 – 2015
Chart 7-12: Total Market Share of In-Lab CAD/CAM Systems, France, 2008
Chart 7-13: Total Market Share of CAD/CAM Systems, France, 2008
ITALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 8-1: Dental Prosthetics Market (€), Italy, 2005 – 2015
Chart 8-2: Crowns and Bridges Market (€), Italy, 2005 – 2015
Chart 8-3: Crowns and Bridges Segmented by Material Type, Italy, 2008
Chart 8-4: Crowns and Bridges Unit Share by Material Type, Italy, 2005 – 2015
Chart 8-5: Dentures Market (€), Italy, 2005 – 2015
Chart 8-6: CAD/CAM Systems Market (€), Italy, 2005 - 2015
Chart 8-7: Full In-Lab CAD/CAM Systems Market, Italy (€), 2005 – 2015
Chart 8-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Italy, 2008
Chart 8-9: Market for Standalone Scanner CAD/CAM Systems, Italy (€), 2005 – 2015
Chart 8-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Italy, 2008
Chart 8-11: Chairside CAD/CAM Systems Market, Italy (€), 2005 – 2015
Chart 8-12: Total Market Share of In-Lab CAD/CAM Systems, Italy, 2008
Chart 8-13: Total Market Share of CAD/CAM Systems, Italy, 2008
U.K MARKET FOR DENTAL PROSTHETICS
Chart 9-1: Dental Prosthetics Market (€), U.K., 2005 – 2015
Chart 9-2: Crowns and Bridges Market (€), U.K., 2005 – 2015
Chart 9-3: Crowns and Bridges Market Segmented by Material Type, 2008
Chart 9-4: Crowns and Bridges by Material Type, U.K., 2005 – 2015
Chart 9-5: Dentures Market (€), U.K., 2005 – 2015
Chart 9-6: CAD/CAM Systems Market (€), U.K., 2005 - 2015
Chart 9-7: Full In-Lab CAD/CAM Systems Market, U.K (€), 2005 – 2015
Chart 9-8: Leading Competitors, Full In-Lab CAD/CAM System Units, U.K., 2008
Chart 9-9: Market for Standalone Scanner CAD/CAM Systems, U.K (€), 2005 – 2015
Chart 9-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, U.K., 2008
Chart 9-11: Chairside CAD/CAM Systems Market, U.K (€), 2005 – 2015
Chart 9-12: Total Market Share of In-Lab CAD/CAM Systems, U.K., 2008
Chart 9-13: Total Market Share of CAD/CAM Systems, U.K., 2008
SPANISH MARKET FOR DENTAL PROSTHETICS
Chart 10-1: Dental Prosthetics Market (€), Spain, 2005 – 2015
Chart 10-2: Crowns and Bridges Market (€), Spain, 2005 – 2015
Chart 10-3: Crowns and Bridges Segmented by Material Type, Spain, 2008
Chart 10-4: Crowns and Bridges Unit Share by Material Type, Spain, 2005 – 2015
Chart 10-5: Dentures Market (€), Spain, 2005 – 2015
Chart 10-6: CAD/CAM Systems Market (€), Spain, 2005 - 2015
Chart 10-7: Full In-Lab CAD/CAM Systems Market, Spain (€), 2005 – 2015
Chart 10-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Spain, 2008
Chart 10-9: Market for Standalone Scanner CAD/CAM Systems, Spain (€), 2005 – 2015
Chart 10-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Spain, 2008
Chart 10-11: Chairside CAD/CAM Systems Market, Spain (€), 2005 – 2015
Chart 10-12: Total Market Share of In-Lab CAD/CAM Systems, Spain, 2008
Chart 10-13: Total Market Share of CAD/CAM Systems, Spain, 2008
BENELUXIAN MARKET FOR DENTAL PROSTHETICS
Chart 11-1: Dental Prosthetics Market (€), Benelux, 2005 – 2015
Chart 11-2: Crowns and Bridges Market (€), Benelux, 2005 – 2015
Chart 11-3: Crowns and Bridges Segmented by Material Type, Benelux, 2008
Chart 11-4: Crowns and Bridges Unit Share by Material Type, Benelux, 2005 – 2015
Chart 11-5: Dentures Market (€), Benelux, 2005 – 2015
Chart 11-6: CAD/CAM Systems Market (€), Benelux, 2005 - 2015
Chart 11-7: Full In-Lab CAD/CAM Systems Market, Benelux (€), 2005 – 2015
Chart 11-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Benelux, 2008
Chart 11-9: Market for Standalone Scanner CAD/CAM Systems, Benelux (€), 2005 – 2015
Chart 11-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Benelux, 2008
Chart 11-11: Chairside CAD/CAM Systems Market, Benelux (€), 2005 – 2015
Chart 11-12: Total Market Share of In-Lab CAD/CAM Systems, Benelux, 2008
Chart 11-13: Total Market Share of CAD/CAM Systems, Benelux, 2008
SCANDINAVIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 12-1: Dental Prosthetics Market (€), Scandinavia, 2005 – 2015
Chart 12-2: Crowns and Bridges Market (€), Scandinavia, 2005 – 2015
Chart 12-3: Crowns and Bridges Market Segmented by Material Type, Scandinavia, 2008
Chart 12-4: Crowns and Bridges Unit Share by Material Type, Scandinavia, 2005 – 2015
Chart 12-5: Dentures Market (€), Scandinavia, 2005 – 2015
Chart 12-6: CAD/CAM Systems Market (€), Scandinavia, 2005 - 2015
Chart 12-7: Full In-Lab CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Chart 12-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Scandinavia, 2008
Chart 12-9: Market for Standalone Scanner CAD/CAM Systems, Scandinavia (€), 2005 – 2015
Chart 12-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Scandinavia, 2008
Chart 12-11: Chairside CAD/CAM Systems Market, Scandinavia (€), 2005 – 2015
Chart 12-12: Total Market Share of In-Lab CAD/CAM Systems, Scandinavia, 2008
Chart 12-13: Total Market Share of CAD/CAM Systems, Scandinavia, 2008
SWISS MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 13-1: Dental Prosthetics Market (€), Switzerland, 2005 – 2015
Chart 13-2: Crowns and Bridges Market (€), Switzerland, 2005 – 2015
Chart 13-3: Crowns and Bridges Segmented by Material Type, Switzerland, 2008
Chart 13-4: Crowns and Bridges Unit Share by Material Type, Switzerland, 2005 – 2015
Chart 13-5: Dentures Market (€), Switzerland, 2005 – 2015
Chart 13-6: CAD/CAM Systems Market (€), Switzerland, 2005 - 2015
Chart 13-7: Full In-Lab CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Chart 13-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Switzerland, 2008
Chart 13-9: Market for Standalone Scanner CAD/CAM Systems, Switzerland (€), 2005 – 2015
Chart 13-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Switzerland, 2008
Chart 13-11: Chairside CAD/CAM Systems Market, Switzerland (€), 2005 – 2015
Chart 13-12: Total Market Share of In-Lab CAD/CAM Systems, Switzerland, 2008
Chart 13-13: Total Market Share of CAD/CAM Systems, Switzerland, 2008
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 14-1: Dental Prosthetics Market (€), Austria, 2005 – 2015
Chart 14-2: Crowns and Bridges Market (€), Austria, 2005 – 2015
Chart 14-3: Crowns and Bridges Market Segmented by Material Type, Austria, 2008
Chart 14-4: Crowns and Bridges Unit Share by Material Type, Austria, 2005 – 2015
Chart 14-5: Dentures Market (€), Austria, 2005 – 2015
Chart 14-6: CAD/CAM Systems Market (€), Austria, 2005 - 2015
Chart 14-7: Full In-Lab CAD/CAM Systems Market, Austria (€), 2005 – 2015
Chart 14-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Austria, 2008
Chart 14-9: Market for Standalone Scanner CAD/CAM Systems, Austria (€), 2005 – 2015
Chart 14-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Austria, 2008
Chart 14-11: Chairside CAD/CAM Systems Market, Austria (€), 2005 – 2015
Chart 14-12: Total Market Share of In-Lab CAD/CAM Systems, Austria, 2008
Chart 14-13: Total Market Share of CAD/CAM Systems, Austria, 2008
PORTUGUESE MARKET FOR DENTAL PROSTHETICS
Chart 15-1: Dental Prosthetics Market (€), Portugal, 2005 – 2015
Chart 15-2: Crowns and Bridges Market (€), Portugal, 2005 – 2015
Chart 15-3: Crowns and Bridges Segmented by Material Type, Portugal, 2008
Chart 15-4: Crowns and Bridges Unit Share by Material Type, Portugal, 2005 – 2015
Chart 15-5: Dentures Market (€), Portugal, 2005 – 2015
Chart 15-6: CAD/CAM Systems Market (€), Portugal, 2005 - 2015
Chart 15-7: Full In-Lab CAD/CAM Systems Market, Portugal (€), 2005 – 2015
Chart 15-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Portugal, 2008
Chart 15-9: Market for Standalone Scanner CAD/CAM Systems, Portugal (€), 2005 – 2015
Chart 15-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Portugal, 2008
Chart 15-11: Chairside CAD/CAM Systems Market, Portugal (€), 2005 – 2015
Chart 15-12: Total Market Share of In-Lab CAD/CAM Systems, Portugal, 2008
Chart 15-13: Total Market Share of CAD/CAM Systems, Portugal, 2008
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Chart 16-2: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Chart 16-3: Crowns and Bridges Market Segmented by Material Type, Russian Federation, 2008
Chart 16-4: Crowns and Bridges Unit Share by Material Type, Russian Federation, 2005 – 2015
Chart 16-5: Dentures Market (€), Russian Federation, 2015 – 2015
Chart 16-6: CAD/CAM Systems Market (€), Russia, 2005 - 2015
Chart 16-7: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-9: Market for Standalone Scanner CAD/CAM Systems, Russia (€), 2005 – 2015
Chart 16-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-11: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-12: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Chart 16-13: Total Market Share of CAD/CAM Systems, Russia, 2008 600