Healthcare 3D Printing Market Analysis By Application (Surgical Guides, Implants, Surgical Instruments, Bioengineering), By Technology (Electron Beam Melting, Stereolithography, Droplet Deposition Manufacturing), By Raw Material (Metals, Biological Cells, Polymers, Ceramics) And Segment Forecast to 2020
The global market for healthcare 3D printing is expected to reach USD 1,129.8 million by 2020, growing at an estimated CAGR of 15.6% from 2014 to 2020. Growing need to produce automated products and increasing number of cost curbing initiatives undertaken by medical device manufacturers are expected to drive market growth during the forecast period. In addition, this technology serves as an effective tool in rendering simulations and clarity to healthcare practitioners while performing or preparing for complicated medical procedures.
Implants dominated the overall market in 2013, accounting for over 60.0% of global revenue, primarily owing to high procedure volumes. Growing demand for this technology as a cost effective and accurate tool is expected to drive segment growth during the forecast period.
Further key findings from the study suggest:
Polymers dominated the raw materials market in terms of share at over 35% in 2013 owing to their high usage rates in printing bio-models. The market for ceramics is expected to grow at a lucrative CAGR of 15.6% during the forecast period as it is widely used to manufacture the tooth or the mandible (jaw bone). Both these raw materials have been included in the U.S. FDA’s list of approved materials to be used for manufacturing implants that will be in contact with the body for long duration of time.
Photo-polymerization dominated the overall technology market and was valued at over USD 140 million in 2013. This technology is used widely by research organizations and companies to manufacture efficient and accurate bio-models.
Laser beam melting is expected to be the fastest growing technology, at an estimated CAGR of over 16% from 2014 to 2020 on account of its growing demand in manufacturing orthopedic implants and hip stems
North America was the largest regional market in 2013, accounting for over 35% of global revenue owing to the presence of high patient awareness levels, increasing healthcare expenditure, sophisticated healthcare infrastructure and increasing investment in R&D facilities pertaining to the development of 3D technologies based products
Europe is expected to be the fastest growing regional market over the forecast period. Presence of a large number of R&D funding programs and increasing demand for customized medical devices in this region is expected to drive market growth over the next six years
Key participants of this market include Envision TEC, Stratasys Inc., Materialise NV, 3D Systems Software, Bio-Rad Laboratories, Organovo, SOLS, Simbionix, Metamason, RegenHU Ltd., Youbionic, Bio3D Technologies Pte Ltd, 3D Matters Pte Ltd., 3D Systems Corporation (3DS), Ekso Bionics, Roche Pharmaceuticals, Renishaw plc., Robohand, Delcam India, Worrell, mobileOCT, Archam, Rainbow Biosciences, ALD Vacuum Technologies, and 3T RPD Ltd.
For the purpose of this study, Grand View Research has segmented the healthcare 3D printing market on the basis of application, technology, raw material and region:
Implants dominated the overall market in 2013, accounting for over 60.0% of global revenue, primarily owing to high procedure volumes. Growing demand for this technology as a cost effective and accurate tool is expected to drive segment growth during the forecast period.
Further key findings from the study suggest:
Polymers dominated the raw materials market in terms of share at over 35% in 2013 owing to their high usage rates in printing bio-models. The market for ceramics is expected to grow at a lucrative CAGR of 15.6% during the forecast period as it is widely used to manufacture the tooth or the mandible (jaw bone). Both these raw materials have been included in the U.S. FDA’s list of approved materials to be used for manufacturing implants that will be in contact with the body for long duration of time.
Photo-polymerization dominated the overall technology market and was valued at over USD 140 million in 2013. This technology is used widely by research organizations and companies to manufacture efficient and accurate bio-models.
Laser beam melting is expected to be the fastest growing technology, at an estimated CAGR of over 16% from 2014 to 2020 on account of its growing demand in manufacturing orthopedic implants and hip stems
North America was the largest regional market in 2013, accounting for over 35% of global revenue owing to the presence of high patient awareness levels, increasing healthcare expenditure, sophisticated healthcare infrastructure and increasing investment in R&D facilities pertaining to the development of 3D technologies based products
Europe is expected to be the fastest growing regional market over the forecast period. Presence of a large number of R&D funding programs and increasing demand for customized medical devices in this region is expected to drive market growth over the next six years
Key participants of this market include Envision TEC, Stratasys Inc., Materialise NV, 3D Systems Software, Bio-Rad Laboratories, Organovo, SOLS, Simbionix, Metamason, RegenHU Ltd., Youbionic, Bio3D Technologies Pte Ltd, 3D Matters Pte Ltd., 3D Systems Corporation (3DS), Ekso Bionics, Roche Pharmaceuticals, Renishaw plc., Robohand, Delcam India, Worrell, mobileOCT, Archam, Rainbow Biosciences, ALD Vacuum Technologies, and 3T RPD Ltd.
For the purpose of this study, Grand View Research has segmented the healthcare 3D printing market on the basis of application, technology, raw material and region:
- Healthcare 3D Printing Application Outlook
- Surgical Guides
- Orthopedic Surgical Guides
- Crani-maxillofacial Surgical Guides
- Dental Surgical Guides
- Implants
- Orthopedic Implants
- Crani-maxillofacial Implants
- Dental Implants
- Surgical Instruments
- Bioengineering
- Healthcare 3D Printing Technology Outlook
- Electron Beam Melting
- Laser Beam Melting
- Photopolymerization
- Stereolithography
- Digital light processing (DLP)
- Two-Photon Polymerization (TPP)
- Droplet Deposition
- Inkjet Printing (IJP)
- Fused Deposition Modeling (FDM)
- Multiphase Jet Solidification (MJS)
- Healthcare 3D Printing Raw Material Outlook
- Metals Market
- Biological Cells
- Polymers
- Ceramics
- Healthcare 3D Printing Regional Outlook
- North America
- Europe
- Asia Pacific
- RoW
CHAPTER 1. EXECUTIVE SUMMARY
1.1. Healthcare 3D printing – Industry Summary and Critical Success Factors (CSFs)
CHAPTER 2. HEALTHCARE 3D PRINTING INDUSTRY OUTLOOK
2.1. Market Segmentation
2.2. Market Size and Growth Prospects
2.3. Healthcare 3D Printing Market Dynamics
2.3.1. Market Driver Analysis
2.3.2. Market Restraint Analysis
2.4. Key Opportunities Prioritized
2.5. Industry Analysis - Porter's
2.6. Healthcare 3D Printing - Company Market Share Analysis
2.7. Healthcare 3D Printing Market PESTEL Analysis, 2012
CHAPTER 3. HEALTHCARE 3D PRINTING APPLICATION OUTLOOK
3.1. Surgical Guides
3.1.1.Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.1.2.Orthopedic Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.1.3.Crani-maxillofacial Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.1.4.Dental Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2. Implants
3.2.1.Implants Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2.2.Orthopedic Implants Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2.3.Crani-maxillofacial Implants Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2.4.Dental Market Implants Estimates and Forecasts, 2012 – 2020 (USD Million)
3.3. Surgical Instruments Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.4. Bioengineering Market Estimates and Forecasts, 2012 – 2020 (USD Million)
CHAPTER 4. HEALTHCARE 3D PRINTING TECHNOLOGY OUTLOOK
4.1. Electron Beam Melting Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.2. Laser Beam Melting Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.3. Photo-polymerization Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.3.1. Stereolithography
4.3.2. Digital light processing (DLP)
4.3.3. Two-Photon Polymerization (TPP)
4.4. Droplet Deposition Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.4.1. Inkjet Printing (IJP)
4.4.2. Fused Deposition Modeling (FDM)
4.4.3. Multiphase Jet Solidification (MJS)
CHAPTER 5. HEALTHCARE 3D PRINTING RAW MATERIAL OUTLOOK
5.1. Metals Market Estimates and Forecasts, 2012 – 2020 (USD Million)
5.2. Biological Cells Market Estimates and Forecasts, 2012 – 2020 (USD Million)
5.3. Polymers Market Estimates and Forecasts, 2012 – 2020 (USD Million)
5.4. Ceramics Market Estimates and Forecasts, 2012 – 2020 (USD Million)
CHAPTER 6. HEALTHCARE 3D PRINTING REGIONAL OUTLOOK
6.1. North America Healthcare 3D Printing Market
6.1.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.1.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.1.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
6.2. Europe Healthcare 3D Printing Market
6.2.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.2.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.2.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
6.3. Asia Pacific Healthcare 3D Printing Market
6.3.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.3.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.3.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
6.4. RoW Healthcare 3D Printing Market
6.4.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.4.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.4.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
CHAPTER 7. COMPETITIVE LANDSCAPE
7.1. 3D Systems Software
7.1.1. Company Overview
7.1.2. Financial Performance
7.1.3. Product Benchmarking
7.1.4. Strategic Initiatives
7.2. Bio-Rad Laboratories
7.2.1. Company Overview
7.2.2. Financial Performance
7.2.3. Product Benchmarking
7.2.4. Strategic Initiatives
7.3. EnvisionTEC
7.3.1. Company Overview
7.3.2. Financial Performance
7.3.3. Product Benchmarking
7.3.4. Strategic Initiatives
7.4. Materialise NV
7.4.1. Company Overview
7.4.2. Financial Performance
7.4.3. Product Benchmarking
7.4.4. Strategic Initiatives
7.5. Stratasys Inc.
7.5.1. Company Overview
7.5.2. Financial Performance
7.5.3. Product Benchmarking
7.5.4. Strategic Initiatives
7.6. Organovo
7.6.1. Company Overview
7.6.2. Financial Performance
7.6.3. Product Benchmarking
7.6.4. Strategic Initiatives
7.7. SOLS
7.7.1. Company Overview
7.7.2. Financial Performance
7.7.3. Product Benchmarking
7.7.4. Strategic Initiatives
7.8. Simbionix
7.8.1. Company Overview
7.8.2. Financial Performance
7.3.3. Product Benchmarking
7.8.4. Strategic Initiatives
7.9. Metamason
7.9.1. Company Overview
7.9.2. Financial Performance
7.9.3. Product Benchmarking
7.9.4. Strategic Initiatives
7.10. RegenHU Ltd.
7.10.1. Company Overview
7.10.2. Financial Performance
7.10.3. Product Benchmarking
7.10.4. Strategic Initiatives
7.11. Youbionic
7.11.1. Company Overview
7.11.2. Financial Performance
7.11.3. Product Benchmarking
7.11.4. Strategic Initiatives
7.12. Bio3D Technologies Pte Ltd
7.12.1. Company Overview
7.12.2. Financial Performance
7.12.3. Product Benchmarking
7.12.4. Strategic Initiatives
7.13. 3D Matters Pte Ltd.
7.13.1. Company Overview
7.13.2. Financial Performance
7.13.3. Product Benchmarking
7.13.4. Strategic Initiatives
7.14. 3D Systems Corporation (3DS)
7.14.1. Company Overview
7.14.2. Financial Performance
7.14.3. Product Benchmarking
7.14.4. Strategic Initiatives
7.15. Ekso Bionics
7.15.1. Company Overview
7.15.2. Financial Performance
7.15.3. Product Benchmarking
7.15.4. Strategic Initiatives
7.16. Roche Pharmaceuticals
7.16.1. Company Overview
7.16.2. Financial Performance
7.16.3. Product Benchmarking
7.16.4. Strategic Initiatives
7.17. Renishaw plc.
7.17.1. Company Overview
7.17.2. Financial Performance
7.17.3. Product Benchmarking
7.17.4. Strategic Initiatives
7.18. Robohand
7.18.1. Company Overview
7.18.2. Financial Performance
7.18.3. Product Benchmarking
7.18.4. Strategic Initiatives
7.19. Robohand
7.19.1. Company Overview
7.19.2. Financial Performance
7.19.3. Product Benchmarking
7.19.4. Strategic Initiatives
7.20. Delcam India
7.20.1 Company Overview
7.20.2 Financial Performance
7.20.3 Product Benchmarking
7.20.4 Strategic Initiatives
7.21. Worrell
7.21.1. Company Overview
7.21.2. Financial Performance
7.21.3. Product Benchmarking
7.21.4. Strategic Initiatives
7.22. MobileOCT
7.22.1. Company Overview
7.22.2. Financial Performance
7.22.3. Product Benchmarking
7.22.4. Strategic Initiatives
7.23. Rainbow Biosciences
7.23.1. Company Overview
7.23.2. Financial Performance
7.23.3. Product Benchmarking
7.23.4. Strategic Initiatives
7.24. ALD Vacuum Technologies
7.24.1. Company Overview
7.24.2. Financial Performance
7.24.3. Product Benchmarking
7.24.4. Strategic Initiatives
7.25. Arcam
7.25.1. Company Overview
7.25.2. Financial Performance
7.25.3. Product Benchmarking
7.25.4. Strategic Initiatives
CHAPTER 8. METHODOLOGY AND SCOPE
8.1. Research Methodology
8.2. Research Scope & Assumption
8.3. List of Data Sources
1.1. Healthcare 3D printing – Industry Summary and Critical Success Factors (CSFs)
CHAPTER 2. HEALTHCARE 3D PRINTING INDUSTRY OUTLOOK
2.1. Market Segmentation
2.2. Market Size and Growth Prospects
2.3. Healthcare 3D Printing Market Dynamics
2.3.1. Market Driver Analysis
2.3.2. Market Restraint Analysis
2.4. Key Opportunities Prioritized
2.5. Industry Analysis - Porter's
2.6. Healthcare 3D Printing - Company Market Share Analysis
2.7. Healthcare 3D Printing Market PESTEL Analysis, 2012
CHAPTER 3. HEALTHCARE 3D PRINTING APPLICATION OUTLOOK
3.1. Surgical Guides
3.1.1.Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.1.2.Orthopedic Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.1.3.Crani-maxillofacial Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.1.4.Dental Surgical Guides Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2. Implants
3.2.1.Implants Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2.2.Orthopedic Implants Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2.3.Crani-maxillofacial Implants Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.2.4.Dental Market Implants Estimates and Forecasts, 2012 – 2020 (USD Million)
3.3. Surgical Instruments Market Estimates and Forecasts, 2012 – 2020 (USD Million)
3.4. Bioengineering Market Estimates and Forecasts, 2012 – 2020 (USD Million)
CHAPTER 4. HEALTHCARE 3D PRINTING TECHNOLOGY OUTLOOK
4.1. Electron Beam Melting Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.2. Laser Beam Melting Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.3. Photo-polymerization Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.3.1. Stereolithography
4.3.2. Digital light processing (DLP)
4.3.3. Two-Photon Polymerization (TPP)
4.4. Droplet Deposition Market Estimates and Forecasts, 2012 – 2020 (USD Million)
4.4.1. Inkjet Printing (IJP)
4.4.2. Fused Deposition Modeling (FDM)
4.4.3. Multiphase Jet Solidification (MJS)
CHAPTER 5. HEALTHCARE 3D PRINTING RAW MATERIAL OUTLOOK
5.1. Metals Market Estimates and Forecasts, 2012 – 2020 (USD Million)
5.2. Biological Cells Market Estimates and Forecasts, 2012 – 2020 (USD Million)
5.3. Polymers Market Estimates and Forecasts, 2012 – 2020 (USD Million)
5.4. Ceramics Market Estimates and Forecasts, 2012 – 2020 (USD Million)
CHAPTER 6. HEALTHCARE 3D PRINTING REGIONAL OUTLOOK
6.1. North America Healthcare 3D Printing Market
6.1.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.1.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.1.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
6.2. Europe Healthcare 3D Printing Market
6.2.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.2.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.2.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
6.3. Asia Pacific Healthcare 3D Printing Market
6.3.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.3.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.3.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
6.4. RoW Healthcare 3D Printing Market
6.4.1. Market Estimates and Forecasts, by Application, 2012 – 2020 (USD Million)
6.4.2. Market Estimates and Forecasts, by Technology, 2012 – 2020 (USD Million)
6.4.3. Market Estimates and Forecasts, by Raw Materials, 2012 – 2020 (USD Million)
CHAPTER 7. COMPETITIVE LANDSCAPE
7.1. 3D Systems Software
7.1.1. Company Overview
7.1.2. Financial Performance
7.1.3. Product Benchmarking
7.1.4. Strategic Initiatives
7.2. Bio-Rad Laboratories
7.2.1. Company Overview
7.2.2. Financial Performance
7.2.3. Product Benchmarking
7.2.4. Strategic Initiatives
7.3. EnvisionTEC
7.3.1. Company Overview
7.3.2. Financial Performance
7.3.3. Product Benchmarking
7.3.4. Strategic Initiatives
7.4. Materialise NV
7.4.1. Company Overview
7.4.2. Financial Performance
7.4.3. Product Benchmarking
7.4.4. Strategic Initiatives
7.5. Stratasys Inc.
7.5.1. Company Overview
7.5.2. Financial Performance
7.5.3. Product Benchmarking
7.5.4. Strategic Initiatives
7.6. Organovo
7.6.1. Company Overview
7.6.2. Financial Performance
7.6.3. Product Benchmarking
7.6.4. Strategic Initiatives
7.7. SOLS
7.7.1. Company Overview
7.7.2. Financial Performance
7.7.3. Product Benchmarking
7.7.4. Strategic Initiatives
7.8. Simbionix
7.8.1. Company Overview
7.8.2. Financial Performance
7.3.3. Product Benchmarking
7.8.4. Strategic Initiatives
7.9. Metamason
7.9.1. Company Overview
7.9.2. Financial Performance
7.9.3. Product Benchmarking
7.9.4. Strategic Initiatives
7.10. RegenHU Ltd.
7.10.1. Company Overview
7.10.2. Financial Performance
7.10.3. Product Benchmarking
7.10.4. Strategic Initiatives
7.11. Youbionic
7.11.1. Company Overview
7.11.2. Financial Performance
7.11.3. Product Benchmarking
7.11.4. Strategic Initiatives
7.12. Bio3D Technologies Pte Ltd
7.12.1. Company Overview
7.12.2. Financial Performance
7.12.3. Product Benchmarking
7.12.4. Strategic Initiatives
7.13. 3D Matters Pte Ltd.
7.13.1. Company Overview
7.13.2. Financial Performance
7.13.3. Product Benchmarking
7.13.4. Strategic Initiatives
7.14. 3D Systems Corporation (3DS)
7.14.1. Company Overview
7.14.2. Financial Performance
7.14.3. Product Benchmarking
7.14.4. Strategic Initiatives
7.15. Ekso Bionics
7.15.1. Company Overview
7.15.2. Financial Performance
7.15.3. Product Benchmarking
7.15.4. Strategic Initiatives
7.16. Roche Pharmaceuticals
7.16.1. Company Overview
7.16.2. Financial Performance
7.16.3. Product Benchmarking
7.16.4. Strategic Initiatives
7.17. Renishaw plc.
7.17.1. Company Overview
7.17.2. Financial Performance
7.17.3. Product Benchmarking
7.17.4. Strategic Initiatives
7.18. Robohand
7.18.1. Company Overview
7.18.2. Financial Performance
7.18.3. Product Benchmarking
7.18.4. Strategic Initiatives
7.19. Robohand
7.19.1. Company Overview
7.19.2. Financial Performance
7.19.3. Product Benchmarking
7.19.4. Strategic Initiatives
7.20. Delcam India
7.20.1 Company Overview
7.20.2 Financial Performance
7.20.3 Product Benchmarking
7.20.4 Strategic Initiatives
7.21. Worrell
7.21.1. Company Overview
7.21.2. Financial Performance
7.21.3. Product Benchmarking
7.21.4. Strategic Initiatives
7.22. MobileOCT
7.22.1. Company Overview
7.22.2. Financial Performance
7.22.3. Product Benchmarking
7.22.4. Strategic Initiatives
7.23. Rainbow Biosciences
7.23.1. Company Overview
7.23.2. Financial Performance
7.23.3. Product Benchmarking
7.23.4. Strategic Initiatives
7.24. ALD Vacuum Technologies
7.24.1. Company Overview
7.24.2. Financial Performance
7.24.3. Product Benchmarking
7.24.4. Strategic Initiatives
7.25. Arcam
7.25.1. Company Overview
7.25.2. Financial Performance
7.25.3. Product Benchmarking
7.25.4. Strategic Initiatives
CHAPTER 8. METHODOLOGY AND SCOPE
8.1. Research Methodology
8.2. Research Scope & Assumption
8.3. List of Data Sources
LIST OF TABLES
1. Healthcare 3D printing – Industry summary & Critical Success Factors (CSFs)
2. Global healthcare 3D printing revenue, 2012 - 2020
3. Global healthcare 3D printing market revenue by region, (USD million), 2012 - 2020
4. Global healthcare 3D printing market revenue by application, (USD million), 2012 - 2020
5. Global surgical guides market, 2012 to 2020 (USD million)
6. Global orthopedic surgical guides market, 2012 to 2020 (USD million)
7. Global crani-maxillofacial surgical guides market, 2012 to 2020 (USD million)
8. Global dental surgical guides market, 2012 to 2020 (USD million)
9. Global implants market, 2012 to 2020 (USD million)
10. Global orthopedic implants market, 2012 to 2020 (USD million)
11. Global crani-maxillofacial implants market, 2012 to 2020 (USD million)
12. Global dental implants market, 2012 to 2020 (USD million)
13. Global surgical instruments market, 2012 to 2020 (USD million)
14. Global bioengineering market, 2012 to 2020 (USD million)
15. Global healthcare 3D printing market revenue by technology, (USD million), 2012 - 2020
16. Global electron beam melting (EBM) market, 2012 to 2020 (USD million)
17. Photopolymerization market, 2012 to 2020 (USD million)
18. Laser beam melting (LBM) market, 2012 to 2020 (USD million)
19. Global stereolithography (SLA) market, 2012 to 2020 (USD million)
20. Digital light processing market, 2012 to 2020 (USD million)
21. Two photon polymerization market, 2012 to 2020 (USD million)
22. Global droplet deposition manufacturing market, 2012 to 2020 (USD million)
23. Inkjet printing market, 2012 to 2020 (USD million)
24. Multiphase jet solidification market, 2012 to 2020 (USD million)
25. Fused deposition modeling market, 2012 to 2020 (USD million)
26. Healthcare 3D printing market, by raw materials, 2012 to 2020 (USD million)
27. Global healthcare 3D printing market, by region, 2012 to 2020 (USD million)
28. North America healthcare 3D printing demand, by application, (USD million), 2012 – 2020
29. North America healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
30. North America healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
31. Europe healthcare 3D printing demand, by application, (USD million), 2012 – 2020
32. Europe healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
33. Europe healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
34. Asia Pacific healthcare 3D printing demand, by application, (USD million), 2012 – 2020
35. Asia Pacific healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
36. Asia Pacific healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
37. RoW healthcare 3D printing demand, by application, (USD million), 2012 – 2020
38. RoW healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
39. RoW healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
40. Global healthcare 3D printing Market - Competitive Landscape
1. Healthcare 3D printing – Industry summary & Critical Success Factors (CSFs)
2. Global healthcare 3D printing revenue, 2012 - 2020
3. Global healthcare 3D printing market revenue by region, (USD million), 2012 - 2020
4. Global healthcare 3D printing market revenue by application, (USD million), 2012 - 2020
5. Global surgical guides market, 2012 to 2020 (USD million)
6. Global orthopedic surgical guides market, 2012 to 2020 (USD million)
7. Global crani-maxillofacial surgical guides market, 2012 to 2020 (USD million)
8. Global dental surgical guides market, 2012 to 2020 (USD million)
9. Global implants market, 2012 to 2020 (USD million)
10. Global orthopedic implants market, 2012 to 2020 (USD million)
11. Global crani-maxillofacial implants market, 2012 to 2020 (USD million)
12. Global dental implants market, 2012 to 2020 (USD million)
13. Global surgical instruments market, 2012 to 2020 (USD million)
14. Global bioengineering market, 2012 to 2020 (USD million)
15. Global healthcare 3D printing market revenue by technology, (USD million), 2012 - 2020
16. Global electron beam melting (EBM) market, 2012 to 2020 (USD million)
17. Photopolymerization market, 2012 to 2020 (USD million)
18. Laser beam melting (LBM) market, 2012 to 2020 (USD million)
19. Global stereolithography (SLA) market, 2012 to 2020 (USD million)
20. Digital light processing market, 2012 to 2020 (USD million)
21. Two photon polymerization market, 2012 to 2020 (USD million)
22. Global droplet deposition manufacturing market, 2012 to 2020 (USD million)
23. Inkjet printing market, 2012 to 2020 (USD million)
24. Multiphase jet solidification market, 2012 to 2020 (USD million)
25. Fused deposition modeling market, 2012 to 2020 (USD million)
26. Healthcare 3D printing market, by raw materials, 2012 to 2020 (USD million)
27. Global healthcare 3D printing market, by region, 2012 to 2020 (USD million)
28. North America healthcare 3D printing demand, by application, (USD million), 2012 – 2020
29. North America healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
30. North America healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
31. Europe healthcare 3D printing demand, by application, (USD million), 2012 – 2020
32. Europe healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
33. Europe healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
34. Asia Pacific healthcare 3D printing demand, by application, (USD million), 2012 – 2020
35. Asia Pacific healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
36. Asia Pacific healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
37. RoW healthcare 3D printing demand, by application, (USD million), 2012 – 2020
38. RoW healthcare 3D printing demand, by technology, (USD million), 2012 – 2020
39. RoW healthcare 3D printing demand, by raw materials, (USD million), 2012 – 2020
40. Global healthcare 3D printing Market - Competitive Landscape
LIST OF FIGURES
1. Healthcare 3D printing - Market Segmentation
2. Global healthcare 3D Printing Market Revenue, 2012 - 2020
3. Healthcare 3D Printing Market Dynamics
4. Healthcare 3D Printing Company Market Share Analysis, 2012
5. Key Opportunities Prioritized
6. Industry Analysis - Porter's
7. Healthcare 3D Printing PESTEL Analysis, 2012
8. Global healthcare 3D printing market, by application, (USD million), 2012 – 2020
9. Global surgical guides market, by region, (USD million), 2012 – 2020
10. Global orthopedic surgical guides market, by region, (USD million), 2012 - 2020
11. Global crani-maxillofacial surgical guides market, by region, (USD million), 2012 - 2020
12. Global dental surgical guides market, by region, (USD million), 2012 – 2020
13. Global implants market, by region, (USD million), 2012 – 2020
14. Global orthopedic implants market, by region, (USD million), 2012 – 2020
15. Global crani-maxillofacial implants market, by region, (USD million), 2012 – 2020
16. Global dental implants market, by region, (USD million), 2012 – 2020
17. Global surgical instruments market, by region, (USD million), 2012 – 2020
18. Global bioengineering market, by region, (USD million), 2012 – 2020
19. Global healthcare 3D printing market, by technology, (USD million), 2012 – 2020
20. Global electron beam melting (EBM) market, by region, (USD million), 2012 – 2020
21. Global photopolymerization market, by region, (USD million), 2012 - 2020
22. Global laser beam melting (LBM) market, by region, (USD million), 2012 - 2020
23. Global stereolithography market, by region, (USD million), 2012 – 2020
24. Global digital light processing market, by region, (USD million), 2012 – 2020
25. Global two photon polymerization market, by region, (USD million), 2012 – 2020
26. Global droplet deposition manufacturing market, by region, (USD million), 2012 – 2020
27. Global inkjet printing market, by region, (USD million), 2012 - 2020
28. Global multiphase jet solidification market, by region, (USD million), 2012 - 2020
29. Global fused deposition modeling market, by region, (USD million), 2012 - 2020
30. Healthcare 3D printing market - company market share analysis, 2013 (%)
1. Healthcare 3D printing - Market Segmentation
2. Global healthcare 3D Printing Market Revenue, 2012 - 2020
3. Healthcare 3D Printing Market Dynamics
4. Healthcare 3D Printing Company Market Share Analysis, 2012
5. Key Opportunities Prioritized
6. Industry Analysis - Porter's
7. Healthcare 3D Printing PESTEL Analysis, 2012
8. Global healthcare 3D printing market, by application, (USD million), 2012 – 2020
9. Global surgical guides market, by region, (USD million), 2012 – 2020
10. Global orthopedic surgical guides market, by region, (USD million), 2012 - 2020
11. Global crani-maxillofacial surgical guides market, by region, (USD million), 2012 - 2020
12. Global dental surgical guides market, by region, (USD million), 2012 – 2020
13. Global implants market, by region, (USD million), 2012 – 2020
14. Global orthopedic implants market, by region, (USD million), 2012 – 2020
15. Global crani-maxillofacial implants market, by region, (USD million), 2012 – 2020
16. Global dental implants market, by region, (USD million), 2012 – 2020
17. Global surgical instruments market, by region, (USD million), 2012 – 2020
18. Global bioengineering market, by region, (USD million), 2012 – 2020
19. Global healthcare 3D printing market, by technology, (USD million), 2012 – 2020
20. Global electron beam melting (EBM) market, by region, (USD million), 2012 – 2020
21. Global photopolymerization market, by region, (USD million), 2012 - 2020
22. Global laser beam melting (LBM) market, by region, (USD million), 2012 - 2020
23. Global stereolithography market, by region, (USD million), 2012 – 2020
24. Global digital light processing market, by region, (USD million), 2012 – 2020
25. Global two photon polymerization market, by region, (USD million), 2012 – 2020
26. Global droplet deposition manufacturing market, by region, (USD million), 2012 – 2020
27. Global inkjet printing market, by region, (USD million), 2012 - 2020
28. Global multiphase jet solidification market, by region, (USD million), 2012 - 2020
29. Global fused deposition modeling market, by region, (USD million), 2012 - 2020
30. Healthcare 3D printing market - company market share analysis, 2013 (%)
