Japanese Market for Orthopedic Large Joint Reconstruction Devices
The Japanese orthopedic large joint reconstruction device market is expected to exceed $2.3 billion over the 2012–2019 forecast period. The orthopedic large joint reconstruction device market includes hip and knee implants, as well as bone cements used to help adhere the implants to bone. Demand is increasing for large joint arthroplasty, which is attributed to the aging Japanese population and a higher number of highly active individuals. Procedure growth will rise again over the forecast period as patients are no longer able to postpone the elective joint replacement procedure.
Knee reconstruction will continue to outpace hip reconstruction growth throughout the forecast period. Both the knee and hip markets experienced a slowdown in growth in 2012, caused by reimbursement protocols instituted by the Japanese government, which limited ASP growth. Unit volumes will continue to grow steadily over the forecast period due to the growing demand for arthroplasty as the aging Japanese population continues to grow.
Scope: This report pertains to a forecast period of 10 years (2009 - 2019) for Japan
Report Contents:
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “bottom up” approach, which includes primary and secondary research methods.
Knee reconstruction will continue to outpace hip reconstruction growth throughout the forecast period. Both the knee and hip markets experienced a slowdown in growth in 2012, caused by reimbursement protocols instituted by the Japanese government, which limited ASP growth. Unit volumes will continue to grow steadily over the forecast period due to the growing demand for arthroplasty as the aging Japanese population continues to grow.
Scope: This report pertains to a forecast period of 10 years (2009 - 2019) for Japan
Report Contents:
- Competitor Analysis
- Identified Strategic Opportunities
- Market Overview by Segment & Country
- Trend Analysis by Segment & Country
- Market Drivers & Limiters
- Mergers & Acquisitions
- Customer Feedback and Market Monitoring
- Knee Reconstruction Device Market
- Hip Reconstruction Device Market
- Bone Cement Market
- Computer-Assisted Navigation Systems
- Total Knee Replacement
- Partial Knee Replacement
- Patellofemoral Replacement
- Interpositional Knee Implants
- Knee Revision
- Fixation Method
- Bearing Surface
- Fixed versus Mobile Bearings
- Total Knee Reconstruction Device Market by Cementation Type
- Total Knee Reconstruction Market by Cruciate Construction
- Total Knee Reconstruction Device Market by Bearing Type
- Total Hip Joint Replacement
- Partial Hip Joint Replacement
- Resurfacing Hip Joint Replacement
- Fixation Method
- Implant Material
- Bearing Surface Technology
- Total Hip Reconstruction Device Market by Cementation Type
- Total Hip Implant Market by Bearing Type
- Ceramic-on-Highly Cross-Linked Polyethylene Bearing Market
- Biomet
- Smith & Nephew
- JMDM
- Zimmer
- Nakashima Medical
- Stryker
- DePuy Synthes
- Kyocera
- Wright Medical
- B.Braun
- Fujian Prosthetics Center
- Exactech
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “bottom up” approach, which includes primary and secondary research methods.
EXECUTIVE SUMMARY
1.1 ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICE MARKET
1.2 TOTAL KNEE RECONSTRUCTION DEVICE MARKET BY FIXATION TYPE
1.3 PARTIAL KNEE RECONSTRUCTION PROCEDURES
1.4 TOTAL HIP REPLACEMENT MARKET BY FIXATION TYPE
1.5 HIP REPLACEMENT MARKET BY BEARING TYPE
1.6 LARGE JOINT REVISION MARKET BY SEGMENT
1.7 LARGE JOINT RECONSTRUCTION DEVICE AVERAGE SELLING PRICES
1.8 BONE CEMENT MARKET
1.9 LEADING COMPETITORS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
JAPANESE MARKET FOR ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICES
3.1 INTRODUCTION
3.1.1 Anatomy and Pathology
3.1.2 Treatment
3.1.3 Treatment Complications
3.1.4 General Product Classifications
3.1.5 Implant Wear and Durability
3.1.6 Patient-Specific Products and Consumer Awareness
3.1.7 Press-Fitted versus Cemented Implantation
3.1.8 Simultaneous Bilateral Implantation
3.1.9 Minimally Invasive Surgery
3.1.10 Computer-Assisted Navigation Systems
3.1.11 Emerging Technologies
3.2 CURRENCY EXCHANGE RATE
3.3 MARKET OVERVIEW
3.4 TREND ANALYSIS BY SEGMENT
3.5 MARKET DRIVERS AND LIMITERS
3.5.1 Market Drivers
3.5.2 Market Limiters
3.6 COMPETITIVE ANALYSIS
3.6.1 Overview
3.6.2 Leading Competitors
3.6.3 Other Notable Competitors
3.6.4 Market Concentration
3.7 MERGERS AND ACQUISITIONS
KNEE RECONSTRUCTION DEVICE MARKET
4.1 INTRODUCTION
4.1.1 Anatomy
4.1.2 Pathology
4.1.3 Treatment
4.1.4 Implant Types
4.1.4.1 Total Knee Replacement
4.1.4.2 Partial Knee Replacement
4.1.4.3 Patellofemoral Replacement
4.1.4.4 Interpositional Knee Implants
4.1.4.5 Knee Revision
4.1.5 Fixation Method
4.1.6 Bearing Surface
4.1.7 Fixed versus Mobile Bearings
4.2 MARKET OVERVIEW
4.3 MARKET ANALYSIS AND FORECAST
4.3.1 Total Knee Reconstruction Device Market by Cementation Type
4.3.1.1 Cemented Total Knee Implant Market
4.3.1.2 Cementless Total Knee Implant Market
4.3.1.3 Hybrid Cemented Total Knee Implant Market
4.3.1.4 Total Knee Reconstruction Market by Cruciate Construction
4.3.1.5 Cruciate-Retaining Device Market
4.3.1.6 Cruciate-Sacrificing Device Market
4.3.2 Total Knee Reconstruction Device Market by Bearing Type
4.3.2.1 Fixed-Bearing Total Knee Replacement Market
4.3.2.2 Mobile-Bearing Total Knee Replacement Market
4.3.3 Partial Knee Implant Market
4.3.3.1 Revision Knee Implant Market
4.4 MARKET DRIVERS AND LIMITERS
4.4.1 Market Drivers
4.4.2 Market Limiters
4.5 COMPETITIVE ANALYSIS
4.5.1 Leading Competitors
HIP RECONSTRUCTION DEVICE MARKET
5.1 INTRODUCTION
5.1.1 Anatomy
5.1.2 Pathology
5.1.3 Treatment
5.1.4 Implant Types
5.1.4.1 Total Hip Joint Replacement
5.1.4.2 Partial Hip Joint Replacement
5.1.4.3 Resurfacing Hip Joint Replacement
5.1.4.4 Revision
5.1.5 Fixation Method
5.1.6 Implant Material
5.1.7 Bearing Surface Technology
5.1.7.1 Polyethylene Bearings
5.1.7.2 Highly Cross-Linked Polyethylene
5.1.7.3 Metal Bearings
5.1.7.4 Ceramic Bearings
5.2 MARKET OVERVIEW
5.3 MARKET ANALYSIS & FORECAST
5.3.1 Total Hip Reconstruction Device Market by Cementation Type
5.3.1.1 Cemented Total Hip Reconstruction Device Market
5.3.1.2
5.3.1.3 Cementless Total Hip Reconstruction Device Market
5.3.1.4 Hybrid Cemented Total Hip Reconstruction Device Market
5.3.2 Total Hip Implant Market by Bearing Type
5.3.2.1 Metal-on-Highly Cross-Linked Polyethylene Bearing Market
5.3.2.2 Metal-on-Metal Bearing Market
5.3.2.3 Ceramic-on-Ceramic Bearing Market
5.3.2.4 Ceramic-on-Highly Cross-Linked Polyethylene Bearing Market
5.3.3 Combined Partial Hip Implant Market
5.3.3.1 Bipolar Partial Hip Implant Market
5.3.3.2 Unipolar Partial Hip Implant Market
5.3.3.3 Resurfacing Hip Implant Market
5.3.3.4 Revision Hip Implant Market
5.4 MARKET DRIVERS AND LIMITERS
5.4.1 Market Drivers
5.4.2 Market Limiters
5.5 COMPETITIVE ANALYSIS
5.5.1 Leading Competitors
5.5.2 Other Notable Competitors
BONE CEMENT MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.3 MARKET DRIVERS AND LIMITERS
6.3.1 Market Drivers
6.3.2 Market Limiters
6.4 COMPETITIVE ANALYSIS
6.4.1 Leading Competitors
ABBREVIATIONS
1.1 ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICE MARKET
1.2 TOTAL KNEE RECONSTRUCTION DEVICE MARKET BY FIXATION TYPE
1.3 PARTIAL KNEE RECONSTRUCTION PROCEDURES
1.4 TOTAL HIP REPLACEMENT MARKET BY FIXATION TYPE
1.5 HIP REPLACEMENT MARKET BY BEARING TYPE
1.6 LARGE JOINT REVISION MARKET BY SEGMENT
1.7 LARGE JOINT RECONSTRUCTION DEVICE AVERAGE SELLING PRICES
1.8 BONE CEMENT MARKET
1.9 LEADING COMPETITORS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
JAPANESE MARKET FOR ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICES
3.1 INTRODUCTION
3.1.1 Anatomy and Pathology
3.1.2 Treatment
3.1.3 Treatment Complications
3.1.4 General Product Classifications
3.1.5 Implant Wear and Durability
3.1.6 Patient-Specific Products and Consumer Awareness
3.1.7 Press-Fitted versus Cemented Implantation
3.1.8 Simultaneous Bilateral Implantation
3.1.9 Minimally Invasive Surgery
3.1.10 Computer-Assisted Navigation Systems
3.1.11 Emerging Technologies
3.2 CURRENCY EXCHANGE RATE
3.3 MARKET OVERVIEW
3.4 TREND ANALYSIS BY SEGMENT
3.5 MARKET DRIVERS AND LIMITERS
3.5.1 Market Drivers
3.5.2 Market Limiters
3.6 COMPETITIVE ANALYSIS
3.6.1 Overview
3.6.2 Leading Competitors
3.6.3 Other Notable Competitors
3.6.4 Market Concentration
3.7 MERGERS AND ACQUISITIONS
KNEE RECONSTRUCTION DEVICE MARKET
4.1 INTRODUCTION
4.1.1 Anatomy
4.1.2 Pathology
4.1.3 Treatment
4.1.4 Implant Types
4.1.4.1 Total Knee Replacement
4.1.4.2 Partial Knee Replacement
4.1.4.3 Patellofemoral Replacement
4.1.4.4 Interpositional Knee Implants
4.1.4.5 Knee Revision
4.1.5 Fixation Method
4.1.6 Bearing Surface
4.1.7 Fixed versus Mobile Bearings
4.2 MARKET OVERVIEW
4.3 MARKET ANALYSIS AND FORECAST
4.3.1 Total Knee Reconstruction Device Market by Cementation Type
4.3.1.1 Cemented Total Knee Implant Market
4.3.1.2 Cementless Total Knee Implant Market
4.3.1.3 Hybrid Cemented Total Knee Implant Market
4.3.1.4 Total Knee Reconstruction Market by Cruciate Construction
4.3.1.5 Cruciate-Retaining Device Market
4.3.1.6 Cruciate-Sacrificing Device Market
4.3.2 Total Knee Reconstruction Device Market by Bearing Type
4.3.2.1 Fixed-Bearing Total Knee Replacement Market
4.3.2.2 Mobile-Bearing Total Knee Replacement Market
4.3.3 Partial Knee Implant Market
4.3.3.1 Revision Knee Implant Market
4.4 MARKET DRIVERS AND LIMITERS
4.4.1 Market Drivers
4.4.2 Market Limiters
4.5 COMPETITIVE ANALYSIS
4.5.1 Leading Competitors
HIP RECONSTRUCTION DEVICE MARKET
5.1 INTRODUCTION
5.1.1 Anatomy
5.1.2 Pathology
5.1.3 Treatment
5.1.4 Implant Types
5.1.4.1 Total Hip Joint Replacement
5.1.4.2 Partial Hip Joint Replacement
5.1.4.3 Resurfacing Hip Joint Replacement
5.1.4.4 Revision
5.1.5 Fixation Method
5.1.6 Implant Material
5.1.7 Bearing Surface Technology
5.1.7.1 Polyethylene Bearings
5.1.7.2 Highly Cross-Linked Polyethylene
5.1.7.3 Metal Bearings
5.1.7.4 Ceramic Bearings
5.2 MARKET OVERVIEW
5.3 MARKET ANALYSIS & FORECAST
5.3.1 Total Hip Reconstruction Device Market by Cementation Type
5.3.1.1 Cemented Total Hip Reconstruction Device Market
5.3.1.2
5.3.1.3 Cementless Total Hip Reconstruction Device Market
5.3.1.4 Hybrid Cemented Total Hip Reconstruction Device Market
5.3.2 Total Hip Implant Market by Bearing Type
5.3.2.1 Metal-on-Highly Cross-Linked Polyethylene Bearing Market
5.3.2.2 Metal-on-Metal Bearing Market
5.3.2.3 Ceramic-on-Ceramic Bearing Market
5.3.2.4 Ceramic-on-Highly Cross-Linked Polyethylene Bearing Market
5.3.3 Combined Partial Hip Implant Market
5.3.3.1 Bipolar Partial Hip Implant Market
5.3.3.2 Unipolar Partial Hip Implant Market
5.3.3.3 Resurfacing Hip Implant Market
5.3.3.4 Revision Hip Implant Market
5.4 MARKET DRIVERS AND LIMITERS
5.4.1 Market Drivers
5.4.2 Market Limiters
5.5 COMPETITIVE ANALYSIS
5.5.1 Leading Competitors
5.5.2 Other Notable Competitors
BONE CEMENT MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.3 MARKET DRIVERS AND LIMITERS
6.3.1 Market Drivers
6.3.2 Market Limiters
6.4 COMPETITIVE ANALYSIS
6.4.1 Leading Competitors
ABBREVIATIONS
