Brazilian Large Bone & Joint Orthopedic Devices Market
The Brazilian orthopedic large joint reconstruction device market is expected to reach $502.4 million by 2019.
The orthopedic large joint reconstruction device market includes hip reconstruction devices, knee reconstruction devices and bone cements used to help adhere the implants to bone. Large joint arthroplasty experienced a continued increase in demand in 2012, attributed to the aging Brazilian population and an increased number of patients able to afford these procedures. Procedure growth will rise over the forecast period as older patients are no longer able to postpone elective joint replacement. Hip reconstruction market growth will continue to outpace knee reconstruction market growth throughout the forecast period. Both the knee and hip markets experienced a steep increase in growth in 2012, as more orthopedic products continued to be introduced into Brazil. Unit volumes will continue to grow steadily over the forecast period due to the growing demand for arthroplasty.
Scope: This report pertains to a forecast period of 10 years (2009 – 2019) for Brazil.
Report Contents:
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “bottom up” approach, which includes primary and secondary research methods.
The orthopedic large joint reconstruction device market includes hip reconstruction devices, knee reconstruction devices and bone cements used to help adhere the implants to bone. Large joint arthroplasty experienced a continued increase in demand in 2012, attributed to the aging Brazilian population and an increased number of patients able to afford these procedures. Procedure growth will rise over the forecast period as older patients are no longer able to postpone elective joint replacement. Hip reconstruction market growth will continue to outpace knee reconstruction market growth throughout the forecast period. Both the knee and hip markets experienced a steep increase in growth in 2012, as more orthopedic products continued to be introduced into Brazil. Unit volumes will continue to grow steadily over the forecast period due to the growing demand for arthroplasty.
Scope: This report pertains to a forecast period of 10 years (2009 – 2019) for Brazil.
Report Contents:
- Competitor Analysis
- Identified Strategic Opportunities
- Market Overview by Segment & Country
- Trend Analysis by Segment & Country
- Market Drivers & Limiters
- Mergers & Acquisitions
- Customer Feedback and Market Monitoring
- Knee Reconstruction Device Market
- Hip Reconstruction Device Market
- Bone Cement Market
- Computer-Assisted Navigation Systems
- Total Knee Replacement
- Partial Knee Replacement
- Patellofemoral Replacement
- Interpositional Knee Implants
- Knee Revision
- Fixation Method
- Bearing Surface
- Fixed versus Mobile Bearings
- Total Knee Reconstruction Device Market by Cementation Type
- Total Knee Reconstruction Market by Cruciate Construction
- Total Knee Reconstruction Device Market by Bearing Type
- Total Hip Joint Replacement
- Partial Hip Joint Replacement
- Resurfacing Hip Joint Replacement
- Fixation Method
- Implant Material
- Bearing Surface Technology
- Total Hip Reconstruction Device Market by Cementation Type
- Total Hip Implant Market by Bearing Type
- Ceramic-on-Highly Cross-Linked Polyethylene Bearing Market
- Biomecânica
- Ortobio
- Exactech
- Smith & Nephew
- Stryker
- DePuy
- Zimmer
- Ortosintese
- Baumer
- IMPOL
- Wright Medical
- MDT
- B. Braun
- Biomet
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “bottom up” approach, which includes primary and secondary research methods.
EXECUTIVE SUMMARY
1.1 ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICE MARKET
1.2 TOTAL KNEE RECONSTRUCTION DEVICE MARKET BY FIXATION TYPE
1.3 TOTAL KNEE RECONSTRUCTION DEVICE MARKET BY BEARING TYPE
1.4 TOTAL HIP REPLACEMENT MARKET BY CEMENTATION TYPE
1.5 HIP REPLACEMENT MARKET BY BEARING TYPE
1.6 LARGE JOINT REVISION MARKET BY SEGMENT
1.7 BONE CEMENT MARKET
1.8 LEADING COMPETITORS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
BRAZILIAN MARKET FOR ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICES
3.1 INTRODUCTION
3.1.1 Anatomy and Pathology
3.1.2 Treatment
3.1.3 Treatment Complications
3.1.4 General Product Classifications
3.1.5 Implant Wear and Durability
3.1.6 Patient-Specific Products and Consumer Awareness
3.1.7 Press-Fitted versus Cemented Implantation
3.1.8 Simultaneous Bilateral Implantation
3.1.9 Minimally Invasive Surgery
3.1.10 Emerging Technologies
3.2 CURRENCY EXCHANGE RATE
3.3 MARKET OVERVIEW
3.4 TREND ANALYSIS BY SEGMENT
3.5 MARKET DRIVERS AND LIMITERS
3.5.1 Market Drivers
3.5.2 Market Limiters
3.6 COMPETITIVE ANALYSIS
3.6.1 Overview
3.6.2 Leading Competitors
3.6.3 Market Concentration
3.7 MERGERS AND ACQUISITIONS
KNEE RECONSTRUCTION DEVICE MARKET
4.1 INTRODUCTION
4.1.1 Anatomy
4.1.2 Pathology
4.1.3 Treatment
4.1.4 Implant Types
4.1.4.1 Total Knee Replacement
4.1.4.2 Partial Knee Replacement
4.1.4.3 Knee Revision
4.1.5 Fixation Method
4.1.6 Bearing Surface
4.1.7 Fixed versus Mobile Bearings
4.2 MARKET OVERVIEW
4.3 MARKET ANALYSIS AND FORECAST
4.3.1 Total Knee Reconstruction Device Market by Cementation Type
4.3.1.1 Cemented Total Knee Implant Market
4.3.1.2 Cementless Total Knee Implant Market
4.3.2 Total Knee Reconstruction Device Market by Cruciate Construction
4.3.2.1 Cruciate-Retaining Device Market
4.3.2.2 Cruciate-Sacrificing Device Market
4.3.3 Total Knee Reconstruction Device Market by Bearing Type
4.3.3.1 Fixed-Bearing Total Knee Implant Market
4.3.3.2 Mobile-Bearing Total Knee Replacement Market
4.3.4 Revision Knee Implant Market
4.4 MARKET DRIVERS AND LIMITERS
4.4.1 Market Drivers
4.4.2 Market Limiters
HIP RECONSTRUCTION DEVICE MARKET
5.1 INTRODUCTION
5.1.1 Anatomy
5.1.2 Pathology
5.1.3 Treatment
5.1.4 Implant Types
5.1.4.1 Total Hip Joint Replacement
5.1.4.2 Partial Hip Joint Replacement
5.1.4.3 Resurfacing Hip Joint Replacement
5.1.4.4 Revision
5.1.5 Fixation Method
5.1.6 Implant Material
5.1.7 Bearing Surface Technology
5.1.7.1 Polyethylene Bearings
5.1.7.2 Highly Cross-Linked Polyethylene
5.1.7.3 Metal Bearings
5.1.7.4 Ceramic Bearings
5.2 MARKET OVERVIEW
5.3 MARKET ANALYSIS & FORECAST
5.3.1 Total Hip Reconstruction Device Market by Cementation Type
5.3.1.1 Cemented Total Hip Implant Market
5.3.1.2 Cementless Total Hip Implant Market
5.3.1.3 Hybrid Total Hip Implant Market
5.3.2 Total Hip Replacement Market by Bearing Type
5.3.2.1 Metal-on-Highly Cross-Linked Polyethylene Bearing Market
5.3.2.2 Metal-on-Metal Bearing Market
5.3.2.3 Ceramic-on-Ceramic Bearing Market
5.3.2.4 Ceramic-on-Highly Cross-linked Polyethylene Bearing Market
5.3.3 Partial Hip Reconstruction Device Market
5.3.4 Resurfacing Hip Implant Market
5.3.5 Revision Hip Implant Market
5.4 MARKET DRIVERS AND LIMITERS
5.4.1 Market Drivers
5.4.2 Market Limiters
BONE CEMENT MARKET
6.1 INTRODUCTION
6.2 MARKET OVERVIEW
6.3 MARKET ANALYSIS AND FORECAST
6.3.1.1 Traditional Bone Cement Market
6.3.1.2 Premixed Antibiotic Bone Cement Market
6.4 MARKET DRIVERS AND LIMITERS
6.4.1 Market Drivers
6.4.2 Market Limiters
ABBREVIATIONS
1.1 ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICE MARKET
1.2 TOTAL KNEE RECONSTRUCTION DEVICE MARKET BY FIXATION TYPE
1.3 TOTAL KNEE RECONSTRUCTION DEVICE MARKET BY BEARING TYPE
1.4 TOTAL HIP REPLACEMENT MARKET BY CEMENTATION TYPE
1.5 HIP REPLACEMENT MARKET BY BEARING TYPE
1.6 LARGE JOINT REVISION MARKET BY SEGMENT
1.7 BONE CEMENT MARKET
1.8 LEADING COMPETITORS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
BRAZILIAN MARKET FOR ORTHOPEDIC LARGE JOINT RECONSTRUCTION DEVICES
3.1 INTRODUCTION
3.1.1 Anatomy and Pathology
3.1.2 Treatment
3.1.3 Treatment Complications
3.1.4 General Product Classifications
3.1.5 Implant Wear and Durability
3.1.6 Patient-Specific Products and Consumer Awareness
3.1.7 Press-Fitted versus Cemented Implantation
3.1.8 Simultaneous Bilateral Implantation
3.1.9 Minimally Invasive Surgery
3.1.10 Emerging Technologies
3.2 CURRENCY EXCHANGE RATE
3.3 MARKET OVERVIEW
3.4 TREND ANALYSIS BY SEGMENT
3.5 MARKET DRIVERS AND LIMITERS
3.5.1 Market Drivers
3.5.2 Market Limiters
3.6 COMPETITIVE ANALYSIS
3.6.1 Overview
3.6.2 Leading Competitors
3.6.3 Market Concentration
3.7 MERGERS AND ACQUISITIONS
KNEE RECONSTRUCTION DEVICE MARKET
4.1 INTRODUCTION
4.1.1 Anatomy
4.1.2 Pathology
4.1.3 Treatment
4.1.4 Implant Types
4.1.4.1 Total Knee Replacement
4.1.4.2 Partial Knee Replacement
4.1.4.3 Knee Revision
4.1.5 Fixation Method
4.1.6 Bearing Surface
4.1.7 Fixed versus Mobile Bearings
4.2 MARKET OVERVIEW
4.3 MARKET ANALYSIS AND FORECAST
4.3.1 Total Knee Reconstruction Device Market by Cementation Type
4.3.1.1 Cemented Total Knee Implant Market
4.3.1.2 Cementless Total Knee Implant Market
4.3.2 Total Knee Reconstruction Device Market by Cruciate Construction
4.3.2.1 Cruciate-Retaining Device Market
4.3.2.2 Cruciate-Sacrificing Device Market
4.3.3 Total Knee Reconstruction Device Market by Bearing Type
4.3.3.1 Fixed-Bearing Total Knee Implant Market
4.3.3.2 Mobile-Bearing Total Knee Replacement Market
4.3.4 Revision Knee Implant Market
4.4 MARKET DRIVERS AND LIMITERS
4.4.1 Market Drivers
4.4.2 Market Limiters
HIP RECONSTRUCTION DEVICE MARKET
5.1 INTRODUCTION
5.1.1 Anatomy
5.1.2 Pathology
5.1.3 Treatment
5.1.4 Implant Types
5.1.4.1 Total Hip Joint Replacement
5.1.4.2 Partial Hip Joint Replacement
5.1.4.3 Resurfacing Hip Joint Replacement
5.1.4.4 Revision
5.1.5 Fixation Method
5.1.6 Implant Material
5.1.7 Bearing Surface Technology
5.1.7.1 Polyethylene Bearings
5.1.7.2 Highly Cross-Linked Polyethylene
5.1.7.3 Metal Bearings
5.1.7.4 Ceramic Bearings
5.2 MARKET OVERVIEW
5.3 MARKET ANALYSIS & FORECAST
5.3.1 Total Hip Reconstruction Device Market by Cementation Type
5.3.1.1 Cemented Total Hip Implant Market
5.3.1.2 Cementless Total Hip Implant Market
5.3.1.3 Hybrid Total Hip Implant Market
5.3.2 Total Hip Replacement Market by Bearing Type
5.3.2.1 Metal-on-Highly Cross-Linked Polyethylene Bearing Market
5.3.2.2 Metal-on-Metal Bearing Market
5.3.2.3 Ceramic-on-Ceramic Bearing Market
5.3.2.4 Ceramic-on-Highly Cross-linked Polyethylene Bearing Market
5.3.3 Partial Hip Reconstruction Device Market
5.3.4 Resurfacing Hip Implant Market
5.3.5 Revision Hip Implant Market
5.4 MARKET DRIVERS AND LIMITERS
5.4.1 Market Drivers
5.4.2 Market Limiters
BONE CEMENT MARKET
6.1 INTRODUCTION
6.2 MARKET OVERVIEW
6.3 MARKET ANALYSIS AND FORECAST
6.3.1.1 Traditional Bone Cement Market
6.3.1.2 Premixed Antibiotic Bone Cement Market
6.4 MARKET DRIVERS AND LIMITERS
6.4.1 Market Drivers
6.4.2 Market Limiters
ABBREVIATIONS
