U.S. Market for Dental Prosthetics and CAD/CAM Devices
This report measures and evaluates the U.S. market for crowns, bridges, inlays/onlays, veneers and dentures. These devices are classified as dental restorations. In dentistry, prosthetics are used for restoring damaged teeth or replacing a whole tooth, a set of teeth or a full dentition.
Scope of Report: This report pertains to a forecast period of 10 years (2010 – 2020) for the US market
Report Includes
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “ground up” approach, which includes primary and secondary research methods.
Scope of Report: This report pertains to a forecast period of 10 years (2010 – 2020) for the US market
Report Includes
- U.S. MARKET FOR DENTAL PROSTHETICS
- GROWTH TRENDS BY SEGMENT
- CROWN AND BRIDGE MARKET
- INLAY/ONLAY MARKET
- VENEER MARKET
- DENTURE AND DENTURE TEETH MARKET
- CAD/CAM SYSTEM MARKET
- CAD/CAM BLOCK AND PROSTHETIC MARKET
- INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET
- RAPID PROTOTYPING SYSTEM MARKET
- Dental Prosthetics Market
- CAD/CAM System and Rapid Prototyping Markets
This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our “ground up” approach, which includes primary and secondary research methods.
EXECUTIVE SUMMARY
1.1 U.S. MARKET FOR DENTAL PROSTHETICS
1.2 GROWTH TRENDS BY SEGMENT
1.3 CROWN AND BRIDGE MARKET
1.4 INLAY/ONLAY MARKET
1.5 VENEER MARKET
1.6 DENTURE AND DENTURE TEETH MARKET
1.7 CAD/CAM SYSTEM MARKET
1.8 CAD/CAM BLOCK AND PROSTHETIC MARKET
1.9 INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET
1.10 RAPID PROTOTYPING SYSTEM MARKET
1.11 COMPETITIVE ANALYSIS
1.11.1 Dental Prosthetics Market
1.11.2 CAD/CAM System and Rapid Prototyping Markets
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
U.S. DENTAL PROSTHETICS MARKET OVERVIEW
3.1 INTRODUCTION
3.1.1 Dental Health Statistics in the United States
3.1.2 Crowns and Bridges
3.1.2.1 Crowns
3.1.2.2 Bridges
3.1.2.3 Material Types
3.1.3 Inlays and Onlays
3.1.3.1 Material Types
3.1.4 Veneers
3.1.4.1 Material Types
3.1.5 Dentures
3.1.5.1 Full Dentures
3.1.5.2 Partial Dentures
3.1.6 Manufacturing Process and Technological Developments
3.1.6.1 Conventional Fabrication
3.1.6.2 CAD/CAM Technology
3.1.6.3 Intra-Oral Digital Impression-Taking
3.1.6.4 Rapid Prototyping
3.2 MARKET OVERVIEW
3.3 TREND ANALYSIS
3.4 DRIVERS AND LIMITERS
3.4.1 Market Drivers
3.4.2 Market Limiters
3.5 COMPETITIVE ANALYSIS
3.6 DENTAL LABORATORY INDUSTRY
3.7 MERGERS, ACQUISITIONS AND PARTNERSHIPS
3.7.1 Dental Prosthetics Market
3.7.2 CAD/CAM System Market
3.7.3 Intra-Oral Digital Impression-Taking System Market
3.7.4 Rapid Prototyping System Market
CROWN AND BRIDGE MARKET
4.1 INTRODUCTION
4.1.1 Crowns
4.1.2 Bridges
4.2 MARKET OVERVIEW
4.3 MARKET ANALYSIS AND FORECAST
4.3.1 Total Crown and Bridge Market
4.3.2 Total Crown Market
4.3.3 Total Bridge Market
4.3.4 Total Crown and Bridge Units Sold by Material Type
4.3.5 Total Full-Cast Crown and Bridge Market
4.3.5.1 Full-Cast Crown Market
4.3.5.2 Full-Cast Bridge Market
4.3.6 Total All-Ceramic Crown and Bridge Market
4.3.6.1 All-Ceramic Crown Market
4.3.6.2 All-Ceramic Bridge Market
4.3.7 Total Zirconia Crown and Bridge Market
4.3.7.1 Layered Zirconia Crown and Bridge Market
4.3.7.2 Monolithic Zirconia Crown and Bridge Market
4.3.8 All-Ceramic Glass Ceramic Crown and Bridge Market
4.3.8.1 Layered Glass Ceramic Crown and Bridge Market
4.3.8.2 Monolithic Glass Ceramic Crown and Bridge Market
4.3.8.3 All-Ceramics - Other Ceramics
4.3.9 Total Non-Precious PFM Crown and Bridge Market
4.3.9.1 Non-Precious PFM Crown Market
4.3.9.2 Non-Precious PFM Bridge Market
4.3.10 Total Semi-Precious PFM Crown and Bridge Market
4.3.10.1 Semi-Precious PFM Crown Market
4.3.10.2 Semi-Precious PFM Bridge Market
4.3.11 Total Precious PFM Crown and Bridge Market
4.3.11.1 Precious PFM Crown Market
4.3.11.2 Precious PFM Bridge Market
4.4 DRIVERS AND LIMITERS
4.4.1 Market Drivers
4.4.2 Market Limiters
4.5 COMPETITIVE ANALYSIS
INLAY AND ONLAY MARKET
5.1 INTRODUCTION
5.2 MARKET ANALYSIS AND FORECAST
5.2.1 Total Inlay and Onlay Market
5.3 INLAYS AND ONLAY MARKET BY MATERIAL TYPE
5.3.1 Gold Inlays and Onlays
5.3.2 Porcelain Inlays and Onlays
5.3.3 Composite Resin Inlays and Onlays
5.4 DRIVERS AND LIMITERS
5.4.1 Market Drivers
5.4.2 Market Limiters
5.5 COMPETITIVE ANALYSIS
VENEER MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.2.1 Total Veneer Market
6.3 UNITS SOLD BY MATERIAL TYPE
6.3.1 Porcelain Veneers
6.3.2 Composite Resin Veneers
6.4 DRIVERS AND LIMITERS
6.4.1 Market Drivers
6.4.2 Market Limiters
6.5 COMPETITIVE ANALYSIS
DENTURE AND DENTURE TEETH MARKET
7.1 INTRODUCTION
7.2 MARKET OVERVIEW
7.3 MARKET ANALYSIS AND FORECAST
7.3.1 Total Denture Market
7.3.1.1 Full Denture Market
7.3.1.2 Partial Denture Market
7.3.2 Denture Teeth Market
7.3.2.1 Units Sold by Material Type
7.4 DRIVERS AND LIMITERS
7.4.1 Market Drivers
7.4.2 Market Limiters
7.5 COMPETITIVE ANALYSIS
7.5.1 Denture Market
7.5.2 Denture Teeth Market
7.6 TECHNOLOGICAL ADVANCES
7.6.1 Digitized Dentures
CAD/CAM SYSTEM MARKET
8.1 INTRODUCTION
8.1.1 Full In-Lab Systems
8.1.2 Standalone Desktop Scanners
8.1.3 Chairside Systems
8.1.4 System Architecture
8.1.5 Manufacturing Flexibility
8.2 MARKET OVERVIEW
8.3 MARKET ANALYSIS AND FORECAST
8.3.1 Total CAD/CAM System Market
8.3.2 Full In-Lab System Market
8.3.3 Standalone Desktop Scanner Market
8.3.4 Chairside System Market
8.4 DRIVERS AND LIMITERS
8.4.1 Market Drivers
8.4.2 Market Limiters
8.5 COMPETITIVE ANALYSIS
CAD/CAM BLOCK AND PROSTHETIC MARKET
9.1 INTRODUCTION
9.2 MARKET ANALYSIS AND FORECAST
9.2.1 CAD/CAM Block Market
9.2.2 CAD/CAM Block Market by Material Type
9.2.2.1 Zirconia CAD/CAM Blocks
9.2.2.2 Porcelain CAD/CAM Blocks
9.2.2.3 Acrylic/Composite CAD/CAM Blocks
9.2.2.4 Metal CAD/CAM Blocks
9.2.3 Total CAD/CAM Prosthetic Market
9.2.3.1 Chairside CAD/CAM Prosthetic Market
9.2.3.2 In-Lab CAD/CAM Prosthetic Market
9.2.3.3 CAD/CAM Block Units Sold Versus CAD/CAM Prosthetic Units Sold
9.2.3.4 CAD/CAM Prosthetic Penetration Rate
9.3 DRIVERS AND LIMITERS
9.3.1 Market Drivers
9.3.2 Market Limiters
9.4 COMPETITIVE ANALYSIS
9.4.1 CAD/CAM Block Market
INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET
10.1 INTRODUCTION
10.2 MARKET ANALYSIS AND FORECAST
10.3 DRIVERS AND LIMITERS
10.3.1 Market Drivers
10.3.2 Market Limiters
10.4 COMPETITIVE ANALYSIS
10.5 NEW PRODUCTS AND DEVELOPMENTS
RAPID PROTOTYPING SYSTEM MARKET
11.1 INTRODUCTION
11.2 MARKET ANALYSIS AND FORECAST
11.3 DRIVERS AND LIMITERS
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 COMPETITIVE ANALYSIS
ABBREVIATIONS
1.1 U.S. MARKET FOR DENTAL PROSTHETICS
1.2 GROWTH TRENDS BY SEGMENT
1.3 CROWN AND BRIDGE MARKET
1.4 INLAY/ONLAY MARKET
1.5 VENEER MARKET
1.6 DENTURE AND DENTURE TEETH MARKET
1.7 CAD/CAM SYSTEM MARKET
1.8 CAD/CAM BLOCK AND PROSTHETIC MARKET
1.9 INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET
1.10 RAPID PROTOTYPING SYSTEM MARKET
1.11 COMPETITIVE ANALYSIS
1.11.1 Dental Prosthetics Market
1.11.2 CAD/CAM System and Rapid Prototyping Markets
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
U.S. DENTAL PROSTHETICS MARKET OVERVIEW
3.1 INTRODUCTION
3.1.1 Dental Health Statistics in the United States
3.1.2 Crowns and Bridges
3.1.2.1 Crowns
3.1.2.2 Bridges
3.1.2.3 Material Types
3.1.3 Inlays and Onlays
3.1.3.1 Material Types
3.1.4 Veneers
3.1.4.1 Material Types
3.1.5 Dentures
3.1.5.1 Full Dentures
3.1.5.2 Partial Dentures
3.1.6 Manufacturing Process and Technological Developments
3.1.6.1 Conventional Fabrication
3.1.6.2 CAD/CAM Technology
3.1.6.3 Intra-Oral Digital Impression-Taking
3.1.6.4 Rapid Prototyping
3.2 MARKET OVERVIEW
3.3 TREND ANALYSIS
3.4 DRIVERS AND LIMITERS
3.4.1 Market Drivers
3.4.2 Market Limiters
3.5 COMPETITIVE ANALYSIS
3.6 DENTAL LABORATORY INDUSTRY
3.7 MERGERS, ACQUISITIONS AND PARTNERSHIPS
3.7.1 Dental Prosthetics Market
3.7.2 CAD/CAM System Market
3.7.3 Intra-Oral Digital Impression-Taking System Market
3.7.4 Rapid Prototyping System Market
CROWN AND BRIDGE MARKET
4.1 INTRODUCTION
4.1.1 Crowns
4.1.2 Bridges
4.2 MARKET OVERVIEW
4.3 MARKET ANALYSIS AND FORECAST
4.3.1 Total Crown and Bridge Market
4.3.2 Total Crown Market
4.3.3 Total Bridge Market
4.3.4 Total Crown and Bridge Units Sold by Material Type
4.3.5 Total Full-Cast Crown and Bridge Market
4.3.5.1 Full-Cast Crown Market
4.3.5.2 Full-Cast Bridge Market
4.3.6 Total All-Ceramic Crown and Bridge Market
4.3.6.1 All-Ceramic Crown Market
4.3.6.2 All-Ceramic Bridge Market
4.3.7 Total Zirconia Crown and Bridge Market
4.3.7.1 Layered Zirconia Crown and Bridge Market
4.3.7.2 Monolithic Zirconia Crown and Bridge Market
4.3.8 All-Ceramic Glass Ceramic Crown and Bridge Market
4.3.8.1 Layered Glass Ceramic Crown and Bridge Market
4.3.8.2 Monolithic Glass Ceramic Crown and Bridge Market
4.3.8.3 All-Ceramics - Other Ceramics
4.3.9 Total Non-Precious PFM Crown and Bridge Market
4.3.9.1 Non-Precious PFM Crown Market
4.3.9.2 Non-Precious PFM Bridge Market
4.3.10 Total Semi-Precious PFM Crown and Bridge Market
4.3.10.1 Semi-Precious PFM Crown Market
4.3.10.2 Semi-Precious PFM Bridge Market
4.3.11 Total Precious PFM Crown and Bridge Market
4.3.11.1 Precious PFM Crown Market
4.3.11.2 Precious PFM Bridge Market
4.4 DRIVERS AND LIMITERS
4.4.1 Market Drivers
4.4.2 Market Limiters
4.5 COMPETITIVE ANALYSIS
INLAY AND ONLAY MARKET
5.1 INTRODUCTION
5.2 MARKET ANALYSIS AND FORECAST
5.2.1 Total Inlay and Onlay Market
5.3 INLAYS AND ONLAY MARKET BY MATERIAL TYPE
5.3.1 Gold Inlays and Onlays
5.3.2 Porcelain Inlays and Onlays
5.3.3 Composite Resin Inlays and Onlays
5.4 DRIVERS AND LIMITERS
5.4.1 Market Drivers
5.4.2 Market Limiters
5.5 COMPETITIVE ANALYSIS
VENEER MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.2.1 Total Veneer Market
6.3 UNITS SOLD BY MATERIAL TYPE
6.3.1 Porcelain Veneers
6.3.2 Composite Resin Veneers
6.4 DRIVERS AND LIMITERS
6.4.1 Market Drivers
6.4.2 Market Limiters
6.5 COMPETITIVE ANALYSIS
DENTURE AND DENTURE TEETH MARKET
7.1 INTRODUCTION
7.2 MARKET OVERVIEW
7.3 MARKET ANALYSIS AND FORECAST
7.3.1 Total Denture Market
7.3.1.1 Full Denture Market
7.3.1.2 Partial Denture Market
7.3.2 Denture Teeth Market
7.3.2.1 Units Sold by Material Type
7.4 DRIVERS AND LIMITERS
7.4.1 Market Drivers
7.4.2 Market Limiters
7.5 COMPETITIVE ANALYSIS
7.5.1 Denture Market
7.5.2 Denture Teeth Market
7.6 TECHNOLOGICAL ADVANCES
7.6.1 Digitized Dentures
CAD/CAM SYSTEM MARKET
8.1 INTRODUCTION
8.1.1 Full In-Lab Systems
8.1.2 Standalone Desktop Scanners
8.1.3 Chairside Systems
8.1.4 System Architecture
8.1.5 Manufacturing Flexibility
8.2 MARKET OVERVIEW
8.3 MARKET ANALYSIS AND FORECAST
8.3.1 Total CAD/CAM System Market
8.3.2 Full In-Lab System Market
8.3.3 Standalone Desktop Scanner Market
8.3.4 Chairside System Market
8.4 DRIVERS AND LIMITERS
8.4.1 Market Drivers
8.4.2 Market Limiters
8.5 COMPETITIVE ANALYSIS
CAD/CAM BLOCK AND PROSTHETIC MARKET
9.1 INTRODUCTION
9.2 MARKET ANALYSIS AND FORECAST
9.2.1 CAD/CAM Block Market
9.2.2 CAD/CAM Block Market by Material Type
9.2.2.1 Zirconia CAD/CAM Blocks
9.2.2.2 Porcelain CAD/CAM Blocks
9.2.2.3 Acrylic/Composite CAD/CAM Blocks
9.2.2.4 Metal CAD/CAM Blocks
9.2.3 Total CAD/CAM Prosthetic Market
9.2.3.1 Chairside CAD/CAM Prosthetic Market
9.2.3.2 In-Lab CAD/CAM Prosthetic Market
9.2.3.3 CAD/CAM Block Units Sold Versus CAD/CAM Prosthetic Units Sold
9.2.3.4 CAD/CAM Prosthetic Penetration Rate
9.3 DRIVERS AND LIMITERS
9.3.1 Market Drivers
9.3.2 Market Limiters
9.4 COMPETITIVE ANALYSIS
9.4.1 CAD/CAM Block Market
INTRA-ORAL DIGITAL IMPRESSION-TAKING SYSTEM MARKET
10.1 INTRODUCTION
10.2 MARKET ANALYSIS AND FORECAST
10.3 DRIVERS AND LIMITERS
10.3.1 Market Drivers
10.3.2 Market Limiters
10.4 COMPETITIVE ANALYSIS
10.5 NEW PRODUCTS AND DEVELOPMENTS
RAPID PROTOTYPING SYSTEM MARKET
11.1 INTRODUCTION
11.2 MARKET ANALYSIS AND FORECAST
11.3 DRIVERS AND LIMITERS
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 COMPETITIVE ANALYSIS
ABBREVIATIONS
