Dewatering Pumps Market Opportunity, Growth Drivers, Industry Trend Analysis, and Forecast 2024 to 2032
The Global Dewatering Pumps Market was valued at USD 7.3 billion in 2023 and is projected to grow at a 5% CAGR from 2024 to 2032. This growth is driven by increasing investments in infrastructure projects worldwide, including roads, bridges, and public transport systems, which require efficient dewatering solutions to ensure site safety and stability. Rising urbanization and the subsequent demand for residential and commercial spaces further boost construction activities. The mining sector is also a significant contributor to market expansion, as growing demand for minerals and resources prompts the expansion of mining operations. Dewatering pumps are essential in maintaining safe working conditions and optimizing resource extraction in these environments.
Additionally, these pumps play a critical role in agriculture, where they are used to regulate water levels during excessive rainfall, safeguarding crops and promoting productivity. Municipalities are increasingly investing in wastewater treatment solutions due to rapid urbanization, and dewatering pumps are essential for managing rising wastewater volumes. Furthermore, dewatering pumps are vital in the oil and gas industry, particularly for managing water in drilling operations, ensuring safety and efficiency. The market is segmented by pump type into submersible, centrifugal, diaphragm, wellpoint, and others.
Submersible pumps dominated the market in 2023 with a value of USD 3 billion and are expected to reach USD 4.7 billion by 2032. These pumps are highly efficient in removing large volumes of water from construction sites, mines, and flooded areas. Their versatility, operating across various depths and environments, enhances their appeal across a wide range of sectors. In terms of capacity, dewatering pumps are categorized into 0.5 to 3 HP, 3 to 10 HP, 10 to 50 HP, and above 50 HP. The 3 to 10 HP capacity pumps, which accounted for approximately 41% of the market in 2023, are anticipated to continue growing through 2032. These pumps are favored by contractors for small to medium-sized construction projects due to their efficiency and moderate power consumption.
North America held a significant portion of the market, valued at USD 1.5 billion in 2023, with expectations to reach USD 2.3 billion by 2032. Infrastructure improvement projects, supported by federal and state funding, are driving the demand for dewatering solutions in the region. The U.S. market is set to grow at a 5.4% CAGR, as government priorities focus on enhancing roads, bridges, and public transport systems, necessitating reliable groundwater management solutions during construction activities.
Additionally, these pumps play a critical role in agriculture, where they are used to regulate water levels during excessive rainfall, safeguarding crops and promoting productivity. Municipalities are increasingly investing in wastewater treatment solutions due to rapid urbanization, and dewatering pumps are essential for managing rising wastewater volumes. Furthermore, dewatering pumps are vital in the oil and gas industry, particularly for managing water in drilling operations, ensuring safety and efficiency. The market is segmented by pump type into submersible, centrifugal, diaphragm, wellpoint, and others.
Submersible pumps dominated the market in 2023 with a value of USD 3 billion and are expected to reach USD 4.7 billion by 2032. These pumps are highly efficient in removing large volumes of water from construction sites, mines, and flooded areas. Their versatility, operating across various depths and environments, enhances their appeal across a wide range of sectors. In terms of capacity, dewatering pumps are categorized into 0.5 to 3 HP, 3 to 10 HP, 10 to 50 HP, and above 50 HP. The 3 to 10 HP capacity pumps, which accounted for approximately 41% of the market in 2023, are anticipated to continue growing through 2032. These pumps are favored by contractors for small to medium-sized construction projects due to their efficiency and moderate power consumption.
North America held a significant portion of the market, valued at USD 1.5 billion in 2023, with expectations to reach USD 2.3 billion by 2032. Infrastructure improvement projects, supported by federal and state funding, are driving the demand for dewatering solutions in the region. The U.S. market is set to grow at a 5.4% CAGR, as government priorities focus on enhancing roads, bridges, and public transport systems, necessitating reliable groundwater management solutions during construction activities.
Report Content
CHAPTER 1 METHODOLOGY & SCOPE
1.1 Market scope & definitions
1.2 Base estimates & calculations
1.3 Forecast calculations
1.4 Data sources
1.4.1 Primary
1.4.2 Secondary
1.4.2.1 Paid sources
1.4.2.2 Public sources
CHAPTER 2 EXECUTIVE SUMMARY
2.1 Industry 360° synopsis, 2021-2032
CHAPTER 3 INDUSTRY INSIGHTS
3.1 Industry ecosystem analysis
3.1.1 Factor affecting the value chain
3.1.2 Disruptions
3.1.3 Future outlook
3.1.4 Manufacturers
3.1.5 Distributors
3.2 Technological overview
3.3 Key news & initiatives
3.4 Regulatory landscape
3.5 Impact forces
3.5.1 Growth drivers
3.5.1.1 Rapid urbanization and growing construction
3.5.1.2 Growing mining sector
3.5.1.3 Expanding oil and gas industry
3.5.1.4 Increasing manufacturing activities
3.5.2 Industry pitfalls & challenges
3.5.2.1 Market saturation and intense competition
3.5.2.2 Regulatory compliance
3.6 Growth potential analysis
3.7 Porter’s analysis
3.8 PESTEL analysis
CHAPTER 4 COMPETITIVE LANDSCAPE, 2023
4.1 Introduction
4.2 Company market share analysis
4.3 Competitive positioning matrix
4.4 Strategic outlook matrix
CHAPTER 5 MARKET ESTIMATES & FORECAST, BY PUMP TYPE, 2021-2032 (USD BILLION) (MILLION UNITS)
5.1 Key trends
5.2 Submersible pumps
5.3 Centrifugal pumps
5.4 Diaphragm pumps
5.5 Wellpoint pumps
5.6 Others (trash pump, etc.)
CHAPTER 6 MARKET ESTIMATES & FORECAST, BY CAPACITY, 2021-2032 (USD BILLION) (MILLION UNITS)
6.1 Key trends
6.2 0.5 to 3 HP
6.3 3 to 10 HP
6.4 10 to 50 HP
6.5 Above 50 HP
CHAPTER 7 MARKET ESTIMATES & FORECAST, BY END USE SECTOR, 2021-2032 (USD BILLION) (MILLION UNITS)
7.1 Key trends
7.2 Construction
7.3 Mining & metals
7.4 Municipal
7.5 Chemicals
7.6 Power generation
7.7 Agriculture
7.8 Others (food and beverage, etc.)
CHAPTER 8 MARKET ESTIMATES & FORECAST, BY DISTRIBUTION CHANNEL, 2021-2032 (USD BILLION) (MILLION UNITS)
8.1 Key trends
8.2 Direct
8.3 Indirect
CHAPTER 9 MARKET ESTIMATES & FORECAST, BY REGION, 2021-2032 (USD BILLION) (MILLION UNITS)
9.1 Key trends
9.2 North America
9.2.1 U.S.
9.2.2 Canada
9.3 Europe
9.3.1 UK
9.3.2 Germany
9.3.3 France
9.3.4 Italy
9.3.5 Spain
9.3.6 Russia
9.4 Asia Pacific
9.4.1 China
9.4.2 India
9.4.3 Japan
9.4.4 South Korea
9.4.5 Australia
9.5 Latin America
9.5.1 Brazil
9.5.2 Mexico
9.6 MEA
9.6.1 South Africa
9.6.2 Saudi Arabia
9.6.3 UAE
CHAPTER 10 COMPANY PROFILES
10.1 Alfa Laval
10.2 Atlas Copco
10.3 Dewatering Solutions
10.4 Ebara
10.5 Flowserve
10.6 Franklin Electric
10.7 Grundfos
10.8 Homa Pumps
10.9 KSB
10.10 Mody Pumps
10.11 Parker Hannifin
10.12 Sulzer
10.13 Wacker Neuson
10.14 Weir Group
10.15 Xylem
CHAPTER 1 METHODOLOGY & SCOPE
1.1 Market scope & definitions
1.2 Base estimates & calculations
1.3 Forecast calculations
1.4 Data sources
1.4.1 Primary
1.4.2 Secondary
1.4.2.1 Paid sources
1.4.2.2 Public sources
CHAPTER 2 EXECUTIVE SUMMARY
2.1 Industry 360° synopsis, 2021-2032
CHAPTER 3 INDUSTRY INSIGHTS
3.1 Industry ecosystem analysis
3.1.1 Factor affecting the value chain
3.1.2 Disruptions
3.1.3 Future outlook
3.1.4 Manufacturers
3.1.5 Distributors
3.2 Technological overview
3.3 Key news & initiatives
3.4 Regulatory landscape
3.5 Impact forces
3.5.1 Growth drivers
3.5.1.1 Rapid urbanization and growing construction
3.5.1.2 Growing mining sector
3.5.1.3 Expanding oil and gas industry
3.5.1.4 Increasing manufacturing activities
3.5.2 Industry pitfalls & challenges
3.5.2.1 Market saturation and intense competition
3.5.2.2 Regulatory compliance
3.6 Growth potential analysis
3.7 Porter’s analysis
3.8 PESTEL analysis
CHAPTER 4 COMPETITIVE LANDSCAPE, 2023
4.1 Introduction
4.2 Company market share analysis
4.3 Competitive positioning matrix
4.4 Strategic outlook matrix
CHAPTER 5 MARKET ESTIMATES & FORECAST, BY PUMP TYPE, 2021-2032 (USD BILLION) (MILLION UNITS)
5.1 Key trends
5.2 Submersible pumps
5.3 Centrifugal pumps
5.4 Diaphragm pumps
5.5 Wellpoint pumps
5.6 Others (trash pump, etc.)
CHAPTER 6 MARKET ESTIMATES & FORECAST, BY CAPACITY, 2021-2032 (USD BILLION) (MILLION UNITS)
6.1 Key trends
6.2 0.5 to 3 HP
6.3 3 to 10 HP
6.4 10 to 50 HP
6.5 Above 50 HP
CHAPTER 7 MARKET ESTIMATES & FORECAST, BY END USE SECTOR, 2021-2032 (USD BILLION) (MILLION UNITS)
7.1 Key trends
7.2 Construction
7.3 Mining & metals
7.4 Municipal
7.5 Chemicals
7.6 Power generation
7.7 Agriculture
7.8 Others (food and beverage, etc.)
CHAPTER 8 MARKET ESTIMATES & FORECAST, BY DISTRIBUTION CHANNEL, 2021-2032 (USD BILLION) (MILLION UNITS)
8.1 Key trends
8.2 Direct
8.3 Indirect
CHAPTER 9 MARKET ESTIMATES & FORECAST, BY REGION, 2021-2032 (USD BILLION) (MILLION UNITS)
9.1 Key trends
9.2 North America
9.2.1 U.S.
9.2.2 Canada
9.3 Europe
9.3.1 UK
9.3.2 Germany
9.3.3 France
9.3.4 Italy
9.3.5 Spain
9.3.6 Russia
9.4 Asia Pacific
9.4.1 China
9.4.2 India
9.4.3 Japan
9.4.4 South Korea
9.4.5 Australia
9.5 Latin America
9.5.1 Brazil
9.5.2 Mexico
9.6 MEA
9.6.1 South Africa
9.6.2 Saudi Arabia
9.6.3 UAE
CHAPTER 10 COMPANY PROFILES
10.1 Alfa Laval
10.2 Atlas Copco
10.3 Dewatering Solutions
10.4 Ebara
10.5 Flowserve
10.6 Franklin Electric
10.7 Grundfos
10.8 Homa Pumps
10.9 KSB
10.10 Mody Pumps
10.11 Parker Hannifin
10.12 Sulzer
10.13 Wacker Neuson
10.14 Weir Group
10.15 Xylem
