Progressing Cavity Pump Market Report: Trends, Forecast and Competitive Analysis to 2030

September 2024 | 150 pages | ID: P8C4F1A8BCE1EN
Lucintel

Abstracts

2 – 3 business days after placing order

Progressing Cavity Pump Trends and Forecast

The future of the global progressing cavity pump market looks promising with opportunities in the oil & gas, water & wastewater treatment, food & beverage, and chemicals & petrochemical markets. The global progressing cavity pump market is expected to reach an estimated $3.4 billion by 2030 with a CAGR of 5.5% from 2024 to 2030. The major drivers for this market are Progressing cavity pumps are in demand for use in oil recovery and other upstream processes, water and wastewater treatment are becoming increasingly important in developed nations, and increase in investments in food & beverage industry.

Lucintel forecasts that up to 500 gpm is expected to witness highest growth over the forecast period because of their versatility in operations, mainly in food & beverages.

APAC is expected to witness highest growth over the forecast period due to the rapid growth and consistent rise in economic activities such as industrialization, modern agriculture, and urbanization, which exacerbated the demand for clean and reusable water.

Emerging Trends in the Progressing Cavity Pump Market

The progressing cavity pump (PCP) market is changing remarkably due to various technological advancements, changes in the industries, and growing focus on efficiency and sustainability. Oil & Gas, water treatment, and chemical processing industries continue to grow and hence, the need for new and effective pumps is on the rise. There are also new developments in the PCP market that suggest a trend toward better performance, greater use of digital technologies, and more rigorous compliance.

• Integration of Digital Technologies: Digital technologies enable real-time monitoring, predictive maintenance, and remote control of progressing cavity lamps. These innovations improve operational efficiency by providing data-driven insights into pump performance and potential issues before they become critical. This trend helps reduce downtime, optimize maintenance schedules, and enhance overall system reliability, making progressing cavity lamps more effective in demanding applications.
• Development of Energy-Efficient Pumps: Energy-efficient progressing cavity lamps help reduce operational costs and environmental impact by consuming less power while maintaining high performance. Advances in materials and engineering have led to more efficient motor designs and improved pump hydraulics. This trend supports sustainability goals and responds to increasing regulatory pressures for energy conservation in industrial processes.
• Enhanced Materials and Durability: Enhanced materials, such as high-grade alloys and composites, increase the resistance of progressing cavity lamps to wear, corrosion, and abrasion. This trend extends the lifespan of pumps and reduces the frequency of replacements or repairs. Improved durability is particularly important in harsh environments and for handling challenging fluids, thus enhancing overall system reliability and reducing maintenance costs.
• Adoption of Smart Pump Solutions: Smart pumps use AI and machine learning algorithms to analyze operational data, optimize performance, and predict failures. These solutions offer advanced diagnostics and real-time adjustments to improve efficiency and reliability. The integration of smart technology helps operators better manage pump systems, leading to enhanced operational control and reduced unplanned downtime.
• Focus on Environmental and Regulatory Compliance: Compliance with environmental regulations and industry standards drives the adoption of progressing cavity lamps that minimize environmental impact, such as reducing emissions and handling hazardous materials safely. Manufacturers are focusing on designing pumps that adhere to these regulations while maintaining high performance. This trend ensures that progressing cavity lamps can be used in various industries without compromising regulatory requirements or environmental responsibilities.

New breed of advancements in the swirling progression cavity pump market includes incorporation of digital technologies, creation of efficient pumps, increased strength and durability of components, greening of pump development, and incorporating smart pump systems, etc. These families of curves suggest a movement towards better, faster, and greener pumping systems. As the industry moves forward, these developments are bringing enhanced operational performance and cost effectiveness while addressing the regulatory compliance and environmental issues, leading to an escalation in the worth and operations of PCPs in different uses.

Recent Developments in the Progressing Cavity Pump Market

The progressing cavity pump (PCP) market observed some positive developments owing to technological modernization, the demand in the industry in terms of how things operate and how the operational demands change with time. New studies in this area have shown that there is great improvement of pumps regarding performance, efficiency, and operability. These shifts are necessitated by the increasing demand for pumpable fluid in the oil, gas, water, and chemical industries among others. Knowing these structural changes helps in comprehending how the progressing cavity pump is getting along with the realities of the modern industrial world and improving efficiency in all industrial processes using the said pump.

• Advanced Materials and Coatings: Application of advanced materials, coatings, and other developments over the years has translated to better operation scanty of PCPs. High-grade alloys and composite coatings offer increased abrasion, corrosion resistance, and chemical degradation. Such advances increase pump life and reduce the need for maintenance. Progressing cavity pump have also been made more resistant to extreme working conditions which enable manufacturers to come up with inexpensive and reliable products for application in an aggressive working environment such as chemical, mining and other industries.
• In terms of IOT and smart technologies: The use of Internet of Things (IoT), amongst other devices has helped improved the operation as well as the management of progressing cavity pump . The pumps connected to the IoT can be used continuously, as performance data can be remotely accessed and reported in real time, thereby obviating problems of candid performance measurement and distant diagnosis. Other intelligent mechanisms, such as AI and machine learning, allow for managing risk through predictive maintenance of systems by processing historical data and anticipating potential breakdowns. This provides the ability to manage a pump system proactively, which leads to improved operational performance by delivering lower downtime and decrease maintenance expenditure.
• Construction of Appliance of Energy Efficient Pumps: A major emphasis has also been put on construction of such energy efficient progressing cavity pump that while operating at the prescribed performance, there is a reduction in power use. Innovative designs of the motor as well as the hydraulic endurance improvements and the system compatibility have produced pumps achieving lower energy consumption whilst yielding the same or higher performance. This development does not only bring down the cost of operations but is also helpful in advancing the aims of sustainability by minimizing pollution that would have been caused by the pumping activities. Energy efficient progressing cavity pump with energy conserving capabilities are now in demand by industries looking forward optimizing energy use in a bid to lessen their carbon emissions
• Improved Customization and Modular Designs: More advanced and hyper-optimized configurable policymaking designs are being provided by the manufacturers so as to fulfill particular application requirements. Improvement on customization: there are provisions to change the pump volume, pump design, and even the pump materials depending on the particular fluids and working environments. A modular design presents low maintenance and easy replacement of components thus lower service visits and reduced operational costs. This adaptability particularly comes in most useful to sectors that are broad and variable in nature and hence require more efficient working pump solutions for discrete operational needs.
• Greater Importance for Regulatory Compliance: Value-adding activities recently embarked on in the progressing cavity pump markets places a great deal of attention on compliance to regulation standards in health and environmental protection. There is a tendency for the manufacturers to make pumps which meet regulatory requirements on emissions, safety, and environmental protection. This focus also addresses relevant concerns of features such as leakage, controlling dangerous substances and pollution of the environment. Adhering to these regulations not only safeguards legal and operational compliance but also increases the commercial viability of progressing cavity pump especially in regions where there are stringent governance policies thereby broadening the uses of such devices in various fields.

In the progressing cavity pump market, there are new improvements such as new materials and coatings, IoT and smart technology integration, energy-saving mode for pump development, better customization and designs, and greater attention to regulatory compliance more than ever before indicating advancements in pump technology. These changes aim to cope with the changing demand of industries seeking reliable, efficient, and flexible pumping solutions. As these advancements are made, the market will become even more active than the current state, improvement of pumping performance efficiency, operational effectiveness and compliance will be enhanced resulting in more expectations in pumping innovation and expansion in different industries.

Strategic Growth Opportunities for Progressing Cavity Pump Market

The demand for and supply of markets enhancing the performance of progressing cavity pump (PCP) owing to increased order in a variety of applications, mainly due to the improved technological and the growing industrial requirements. The vast versatility in design makes it advantageous in most sectors including the oil and gas, the water treatment, the chemical processing and so forth. Therefore, identifying strategical opportunities for further development in the key application areas is crucial for the players of the market keen on acquiring development trends and market demands. Companies can enhance their offerings in the progressing cavity pump market by focusing on particular applications which helps to address the demands and requirements of niche markets.

• Oil and Gas Industry: This The oil and gas industry offers a considerable market opportunity for fleece since they are better capable of managing, thick, and erosive liquids that are frequently found in extraction and processing industries. There is growing demand for exploratory and production activities for example unconventional oil fields like shale which in turn increases the requirement of efficient, reliable and better pumps. Improvements in the efficiency of the progressing cavity pump , as well as in the materials used to manufacture them, have made it possible to operate under more severe conditions with reduced maintenance and at extended periods. This growth opportunity is crucial to back up the increasing development of oil and gas activities around the world.
• Water and Wastewater Treatment: The ROM industries also involve the use of progressive cavity pumps in the water and wastewater treatment sector as these provide scope for pumping sludges, slurries, and other difficult fluids. There is a current demand for better pumping solutions owing to the increased emphasis on the environmental sustainability and progress of infrastructure works. The rationale for the positive regard given to PC pumps is that they are able to maintain the constant flow and the ability to deal with high solids, which is necessary in most of the treatment processes. There are possibilities in designing the pumps with higher performance and less energy consumption because of the growing requirements for modern water and wastewater treatment plants in terms of efficiency and eco-friendliness.
• Chemical Processing: In chemical processing, the pumping of corrosive, abrasive and viscous fluids is quite common which necessitates use of special pumps. There are other benefits of progressing cavity pump such as the ability to maintain constant flow and pumping of different formulations of chemicals. With the more growth of the chemicals industry as a result of production increase and more regulations, there comes a need for standards in excellence and performance for the pumps. Recent materials development and sealing technologies in the design of progressing cavity pump will solve these problems and there is a good chance of growth in the chemical processing market as this will enhance safety, efficiency and compliance.
• Gymnastics of pumps, “Food and Beverage Industry”: In the foods and beverages markets, active cavity pumps are used for moving thick and fragile products like sauces, pastes or dairy. However, the requirements for food hight sanitary standards and good flow rate control will be positive when considering hight sanitary and easy to clean progressing cavity pump . Further developments in pumping methods in order to match the food regulation efficiency requirements can contribute to the growth of this segment. Focusing on food quality and safety requirements will bring plenty of market opportunities in food and beverages.
• Mining and Minerals Processing: The domain of mining and minerals processing includes the creation of pumps for pumping abrasive and high-density slurries. And because there is continuous flow with the use of progressing cavity pump , they are being employed in this application despite the harsh conditions. But with the expansion and the growing complexities of the mining operations there will be an increased demand for pumping systems that are more efficient and stronger. There is a scope for improvement in the existing development of progressing cavity pump in terms of wear and durability to cut the constraints in the operations of mineral processing and the future trend of the mining business.

Over the years, the progressing cavity pumps Market has developed and expanded significant growth opportunities in the whole industry with respect to oil and gas, water and waste treatment, chemical, food and beverage and mining sectors. In their quest to take full advantage of these market opportunities, manufacturers of progressing cavity pump need to target the specific aspects of each industry, such as pumping certain difficult fluids, efficiency and meeting regulations. Therefore, addressing the specific requirements of these new applications will allow businesses to exploit the existing opportunities and help the development of the progressing cavity pump market.

Progressing Cavity Pump Market Driver and Challenges

The progressing cavity pump (PCP) market is subject to numerous factors of a technological, economic as well as regulatory nature, which propel the market but pose challenges. New technologies and growing needs of various industries are the foremost stimulants, while business cycles and market regulations represent the barriers to the growth of the industry at large. It is important for the stakeholders to appreciate these drivers and barriers in the shift to the new normal market, performance enhancement and market demand comprehension and satisfaction. The following analysis aims at discussing some important drivers that impede the growth and drivers that companies have to surmount in this rather competitive market of progressing cavity pumps.

The factors responsible for driving the progressing cavity pump market include:

1. Technological Advancements: The technological advancements including sophisticated materials and smart technologies are factors responsible for the growth of progressing cavity pump market. Better performance and lengthened lifespan of materials contribute to the prospects of development while the convergence of IoT and AI is meant for timely reporting and among others predictive maintenance. Increased operational efficiency, less downtime and lower costs of maintenance of the equipment, are some of the benefits achieved as a result of these advancements. Of more the continued increase in demand for progressive cavity pumps from growing industries provides the market with new investment opportunities.

2. Increase in Oil and Gas Sector Activities: The oil and gas industry contributes to the growth of the progressing cavity pump market owing to the technology's requirement of strong pumping systems used in viscous and abrasive fluids handling. There is an attention to progressing cavity pump owing to the increased exploration and production activities especially in new oil fields such as shale. Such machines guarantee a steady volume of flow and running them in an unfavorable environment is not an issue, hence, the equipment is suited for oil extraction and its processing. It is this increase in demand from the oil and gas sector that is one of the factors responsible for the growth of the progressing cavity pump market.

3. Development of Water and Wastewater Engineering: Development of offshore and onshore utilities including water as well as wastewater treatment plants due to various reasons including environmental requirements is also increasing the market for progressing cavity pump . These pumps are specifically used for the tough primary processes of the treatment hydrodynamics which includes sludge, slurries and other applicable fluids. As water or wastewater treatment plants are being renovated and constructed by municipalities and industries, the replacement and addition of pumping equipment which are efficient and trustworthy is increasing. This trend fosters the growth of the market as it enhances the growth for pumps that are for industrial use in which environmental regulations are adhered to without any concerns.

4. Growing Use of Industry Automation: The prevalence of industrial automation among various industries is creating a need for advanced PCPs. The concept of firing up the automation includes the requirement of using pumps that are not only automated integrating with digital controls but also ensures precision and consistency of fluid directions. The increasing adoption of technology-based smart pumping solutions also helps in the streamlining of pumping processes. With the continued automatization of production units by industries in order to increase production efficiency, the demand for technologically sophisticated progressing cavity pump that allow for automation and provide feedback on production process is becoming evident leading to growth of the market.

5. Growing Concern for Energy Efficiency: Due to the increasing prices of energy and the obligation to control pollution, energy efficiency has also become a major consideration in the design and selection of progressing cavity pump . Due to this, manufacturers are looking for ways of coming up with pumps that utilize less energy and operating cost while producing high output. All of these advancements not only cut back on costs but also contribute to goals on sustainability development globally. Since some of the industries are trying to cut down on their energy usage, and operational costs, the demand for energy efficient as well as power conserving progressing cavity pump is growing which is advantageous for market growth.

Challenges in the progressing cavity pump market are:

1. High Initial Cost: The high initial cost of the investment when measuring advanced progressing cavity pump can present a barrier to the growth of the market particularly for small and medium enterprises (SME’s). It has been observed that even though advanced pumps in the long run save on efficiencies as well as maintenance costs, the initial capital is very high. This challenge requires manufacturers to come up with cheaper ways to meet the requirements and offer good returns so that the involved parties will be able to offset the costs. Cutting down on the high initial cost is very critical for the further development of market penetration as well as utilization by the greater number of the customers with varied characteristics.

2. Regulatory Compliance: Adhering to the environmental and safety policy guidelines particular to various external environments poses a major challenge to the progressing cavity pump suppliers. The emission control, materials used and operational specifications are among the practices regulated and necessitate a constant change and upgrading of technology. The geographical area where the operational processes are carried out and the type of industry determines the level of complexity of the regulations. Such developments as changing designs and processes to meet new requirements are costly and affect competition in the market.

3. Competitive Market Dynamics: Competitive rivalry is fierce amongst the players in the market for progressing cavity pump . Price pressures are very high due to the intense rivalry in the market which also requires constant newness for market differentiation. Companies need to rely on R&D in order to strategically position against their rivals and meet the expected demands of the changing industry. The ever evolving competitive market environment with its complexities calls for effective product development, customer interaction and market positioning strategies in order to foster growth.

The progressing cavity pump marketplace is influenced and affected by the presence of certain key market drivers including technological innovations, the increase of oil and gas activities, the growth of water and sewage treatment, and rapid growth of industrialization and the growing demand for energy saving. However, high in-vestment costs, regulatory burden, and competitive market structures are some of the main bottlenecks that constrain the growth and profitability of the industry. Successfully addressing these drivers and challenges is essential for stakeholders in order to seize opportunities and performance efficiently while adapting to the changes in the progressing cavity pump market.

List of Progressing Cavity Pump Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies progressing cavity pump companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the progressing cavity pump companies profiled in this report include-

• Seepex
• Schlumberger
• NOV
• Xylem
• CIRCOR
• Weatherford
• Borets
• Roto Pumps
• Sulzer
• Champion X

Progressing Cavity Pump by Segment

The study includes a forecast for the global progressing cavity pump by product type, pumping capacity, end use, and region.

Progressing Cavity Pump Market by Product Type [Analysis by Value from 2018 to 2030]:

• Dosing Pump
• Flanged Pump
• Hopper Pump
• Food Grade (non-certified)
• Food Grade (3A certified)
• Vertical Pump
• Downhole Pump

Progressing Cavity Pump Market by Pumping capacity [Analysis by Value from 2018 to 2030]:

• Up to 500 GPM
• 501–1,000 GPM
• Above 1,000 GPM

Progressing Cavity Pump Market by End Use [Analysis by Value from 2018 to 2030]:

• Oil & Gas
• Water & Wastewater Treatment
• Food & Beverage
• Chemicals & Petrochemical
• Others

done

Progressing Cavity Pump Market by Region [Shipment Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Progressing Cavity Pump Market

The progressing cavity pump (progressing cavity lamp) market is evolving rapidly, driven by advancements in technology, increased demand in various industries, and regional market dynamics. Progressing cavity pumps are widely used in industries such as oil and gas, water and wastewater, and chemical processing due to their ability to handle viscous fluids and maintain a steady flow rate. Recent developments across key markets like the United States, China, Germany, India, and Japan reflect changes in technological innovation, regulatory impacts, and shifting industry needs, each contributing to the growth and transformation of the progressing cavity lamp market.

• United States: In the United States, the progressing cavity pump market is experiencing growth driven by advancements in pump technology and increased demand from the oil and gas industry. Innovations include the development of more durable and efficient materials that enhance pump performance and longevity. The focus on energy efficiency and reduced operational costs is also prominent, with companies investing in smart pump technologies that provide real-time monitoring and predictive maintenance. Additionally, the expanding shale oil and gas production has significantly increased the demand for progressing cavity lamps, further driving market growth.
• China: China's progressing cavity pump market is witnessing rapid expansion due to the country's robust industrial growth and increased investment in infrastructure projects. The demand for progressing cavity lamps is rising in sectors such as wastewater treatment, mining, and chemical processing. Chinese manufacturers are focusing on enhancing pump efficiency and reliability through technological advancements and adopting international standards. The growth of the oil and gas sector, coupled with increased environmental regulations, is also driving the adoption of advanced progressing cavity lamp technologies to meet stricter performance and emission requirements.
• Germany: In Germany, the progressing cavity pump market is characterized by a strong emphasis on technological innovation and sustainability. German manufacturers are leading in the development of high-efficiency progressing cavity lamps designed for various industrial applications, including chemical processing and water treatment. There is a significant focus on integrating digital technologies such as IoT for remote monitoring and maintenance, enhancing operational efficiency and reliability. Additionally, Germany's stringent environmental regulations are encouraging the adoption of more energy-efficient and environmentally friendly pump solutions.
• India: India's progressing cavity pump market is growing due to increased industrial activity and infrastructure development. The demand for progressing cavity lamps is driven by the expansion of the oil and gas sector, water and wastewater management, and chemical industries. Manufacturers are introducing cost-effective and durable solutions tailored to the diverse needs of the Indian market. Innovations in pump design and materials are improving performance and reliability, addressing challenges such as handling abrasive and corrosive fluids. Government initiatives aimed at enhancing industrial infrastructure and promoting sustainable practices are also contributing to market growth.
• Japan: In Japan, the progressing cavity pump market is advancing with a focus on high-tech applications and precision engineering. Japanese companies are integrating advanced materials and technologies to improve the efficiency and reliability of progressing cavity lamps used in industries like pharmaceuticals, food processing, and chemical manufacturing. The market is also seeing increased adoption of smart pump technologies that offer real-time data analysis and predictive maintenance capabilities. Japan's emphasis on innovation and quality, along with the need to meet stringent industrial standards, is driving the development of sophisticated and high-performance progressing cavity lamp solutions.

Features of the Global Progressing Cavity Pump Market

Market Size Estimates: Progressing cavity pump market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Progressing cavity pump market size by product type, pumping capacity, end use , and region in terms of value ($B).

Regional Analysis: Progressing cavity pump market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different product type, pumping capacity, end use , and regions for the progressing cavity pump market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the progressing cavity pump market.

Analysis of competitive intensity of the industry based on Porter’s Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

Q.1. What are some of the most promising, high-growth opportunities for the progressing cavity pump market by product type (dosing pump, flanged pump, hopper pump, food grade (non-certified), food grade (3A certified), vertical pump, and downhole pump), pumping capacity (up to 500 gpm, 501–1,000 gpm, and above 1,000 gpm), end use (oil & gas, water & wastewater treatment, food & beverage, chemicals & petrochemical, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?

Q.2. Which segments will grow at a faster pace and why?

Q.3. Which region will grow at a faster pace and why?

Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?

Q.5. What are the business risks and competitive threats in this market?

Q.6. What are the emerging trends in this market and the reasons behind them?

Q.7. What are some of the changing demands of customers in the market?

Q.8. What are the new developments in the market? Which companies are leading these developments?

Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?

Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?

Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

For any questions related to Progressing Cavity Pump Market, Progressing Cavity Pump Market Size, Progressing Cavity Pump Market Growth, Progressing Cavity Pump Market Analysis, Progressing Cavity Pump Market Report, Progressing Cavity Pump Market Share, Progressing Cavity Pump Market Trends, Progressing Cavity Pump Market Forecast, Progressing Cavity Pump Companies, write Lucintel analyst at email: [email protected]. We will be glad to get back to you soon.

Contents

1. EXECUTIVE SUMMARY

2. GLOBAL PROGRESSING CAVITY PUMP MARKET : MARKET DYNAMICS

2.1: Introduction, Background, and Classifications
2.2: Supply Chain
2.3: Industry Drivers and Challenges

3. MARKET TRENDS AND FORECAST ANALYSIS FROM 2018 TO 2030

3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
3.2. Global Progressing Cavity Pump Market Trends (2018-2023) and Forecast (2024-2030)
3.3: Global Progressing Cavity Pump Market by Product Type
  3.3.1: Dosing Pump
  3.3.2: Flanged Pump
  3.3.3: Hopper Pump
  3.3.4: Food Grade (non-certified)
  3.3.5: Food Grade (3A certified)
  3.3.6: Vertical Pump
  3.3.7: Downhole Pump
3.4: Global Progressing Cavity Pump Market by Pumping capacity
  3.4.1: Up to 500 GPM
  3.4.2: 501–1,000 GPM
  3.4.3: Above 1,000 GPM
3.5: Global Progressing Cavity Pump Market by End Use
  3.5.1: Oil & Gas
  3.5.2: Water & Wastewater Treatment
  3.5.3: Food & Beverage
  3.5.4: Chemicals & Petrochemical
  3.5.5: Others

4. MARKET TRENDS AND FORECAST ANALYSIS BY REGION FROM 2018 TO 2030

4.1: Global Progressing Cavity Pump Market by Region
4.2: North American Progressing Cavity Pump Market
  4.2.1: North American Progressing Cavity Pump Market by Pumping capacity: Up to 500 GPM, 501–1,000 GPM, and Above 1,000 GPM
  4.2.2: North American Progressing Cavity Pump Market by End Use : Oil & Gas, Water & Wastewater Treatment, Food & Beverage, Chemicals & Petrochemical, and Others
4.3: European Progressing Cavity Pump Market
  4.3.1: European Progressing Cavity Pump Market by Pumping capacity: Up to 500 GPM, 501–1,000 GPM, and Above 1,000 GPM
  4.3.2: European Progressing Cavity Pump Market by End Use : Oil & Gas, Water & Wastewater Treatment, Food & Beverage, Chemicals & Petrochemical, and Others
4.4: APAC Progressing Cavity Pump Market
  4.4.1: APAC Progressing Cavity Pump Market by Pumping capacity: Up to 500 GPM, 501–1,000 GPM, and Above 1,000 GPM
  4.4.2: APAC Progressing Cavity Pump Market by End Use : Oil & Gas, Water & Wastewater Treatment, Food & Beverage, Chemicals & Petrochemical, and Others
4.5: ROW Progressing Cavity Pump Market
  4.5.1: ROW Progressing Cavity Pump Market by Pumping capacity: Up to 500 GPM, 501–1,000 GPM, and Above 1,000 GPM
  4.5.2: ROW Progressing Cavity Pump Market by End Use : Oil & Gas, Water & Wastewater Treatment, Food & Beverage, Chemicals & Petrochemical, and Others

5. COMPETITOR ANALYSIS

5.1: Product Portfolio Analysis
5.2: Operational Integration
5.3: Porter’s Five Forces Analysis

6. GROWTH OPPORTUNITIES AND STRATEGIC ANALYSIS

6.1: Growth Opportunity Analysis
  6.1.1: Growth Opportunities for the Global Progressing Cavity Pump Market by Product Type
  6.1.2: Growth Opportunities for the Global Progressing Cavity Pump Market by Pumping capacity
  6.1.3: Growth Opportunities for the Global Progressing Cavity Pump Market by End Use
  6.1.4: Growth Opportunities for the Global Progressing Cavity Pump Market by Region
6.2: Emerging Trends in the Global Progressing Cavity Pump Market
6.3: Strategic Analysis
  6.3.1: New Product Development
  6.3.2: Capacity Expansion of the Global Progressing Cavity Pump Market
  6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Progressing Cavity Pump Market
  6.3.4: Certification and Licensing

7. COMPANY PROFILES OF LEADING PLAYERS

7.1: Seepex
7.2: Schlumberger
7.3: NOV
7.4: Xylem
7.5: CIRCOR
7.6: Weatherford
7.7: Borets
7.8: Roto Pumps
7.9: Sulzer
7.10: Champion X