Opportunities for FRP Pipes in North America 2015-2020: Market Size, Market Share, and Forecast Analysis
According to a new market report published by Lucintel, the future of the FRP pipe market looks good with opportunities in the oil and gas, retail fuel, water/waste water, sewage, and chemical industries. The North American FRP pipe market is forecast to grow at a CAGR of 2.9% from 2015 to 2020. The major growth drivers for this market are an increase in shale gas exploration activities and the expanding offshore oil and gas industry. Growth of further demand in key end use industries, such as the construction of water supply systems and development of sewage treatment systems, is expected to remain a key driving factor for the North American FRP pipe market.
In this market, epoxy, polyester, and vinyl ester are the major resin types for the manufacture of FRP pipes. Lucintel predicts that the demand for epoxy resins in FRP pipes is expected to experience the highest growth in the forecast period, supported by growing demand in onshore oil & gas and chemical applications. On the basis of its comprehensive research, Lucintel forecasts that onshore oil & gas, chemical/industrial, water/wastewater, and sewage applications are expected to show above average growth.
Within the FRP pipe market, onshore oil and gas is expected to remain the largest market by value and volume consumption, followed by chemical/industrial applications. The growth of oil and gas exploration activities and the boom in shale gas production in the onshore oil & gas industry are expected to spur growth for this segment over the forecast period.
The US is expected to remain the largest market due to the growth in end use applications of onshore oil and gas as well as chemical/ industrial. The US government and private players are expected to invest more to set up new pipelines to transport crude oil and gas, which will drive the growth of the FRP pipe market.
For market expansion, the report suggests innovation and new product development where the unique characteristics of FRP pipes can be capitalized. Emerging trends, which have a direct impact on the dynamics of the industry, are the introduction of onsite FRP pipe manufacturing facilities and increasing rehabilitation activities of pipelines. NOV Fiber Glass Systems, Future Pipe Industries, Hobas Pipe USA, Reinforced Plastics Systems, and Amiantit are some of the major manufacturers of FRP pipes.
Lucintel, a leading global strategic consulting and market research firm, has analyzed opportunities for FRP Pipes in North America by end-use industry, material type, and region and has come up with a comprehensive research report, “Opportunities for FRP Pipes in North America 2015-2020: Market Size, Market Share and Forecast Analysis.” The Lucintel report serves as a spring board for growth strategies as it provides comprehensive data and analysis on trends, key drivers, and directions. The study includes a forecast for FRP pipes in the North Amercian market through 2020, segmented by end-use industry, material type, and region as follows:
To make business, investment, and strategic decisions, you need timely, useful information. This market report fulfills this core need and is an indispensable reference guide for multinational materials suppliers, product manufacturers, investors, executives, distributors, and many more that operate in this market.
Some of the features of “Opportunities for FRP Pipes in North America 2015-2020: Market Size, Market Share, and Forecast Analysis” include:
In this market, epoxy, polyester, and vinyl ester are the major resin types for the manufacture of FRP pipes. Lucintel predicts that the demand for epoxy resins in FRP pipes is expected to experience the highest growth in the forecast period, supported by growing demand in onshore oil & gas and chemical applications. On the basis of its comprehensive research, Lucintel forecasts that onshore oil & gas, chemical/industrial, water/wastewater, and sewage applications are expected to show above average growth.
Within the FRP pipe market, onshore oil and gas is expected to remain the largest market by value and volume consumption, followed by chemical/industrial applications. The growth of oil and gas exploration activities and the boom in shale gas production in the onshore oil & gas industry are expected to spur growth for this segment over the forecast period.
The US is expected to remain the largest market due to the growth in end use applications of onshore oil and gas as well as chemical/ industrial. The US government and private players are expected to invest more to set up new pipelines to transport crude oil and gas, which will drive the growth of the FRP pipe market.
For market expansion, the report suggests innovation and new product development where the unique characteristics of FRP pipes can be capitalized. Emerging trends, which have a direct impact on the dynamics of the industry, are the introduction of onsite FRP pipe manufacturing facilities and increasing rehabilitation activities of pipelines. NOV Fiber Glass Systems, Future Pipe Industries, Hobas Pipe USA, Reinforced Plastics Systems, and Amiantit are some of the major manufacturers of FRP pipes.
Lucintel, a leading global strategic consulting and market research firm, has analyzed opportunities for FRP Pipes in North America by end-use industry, material type, and region and has come up with a comprehensive research report, “Opportunities for FRP Pipes in North America 2015-2020: Market Size, Market Share and Forecast Analysis.” The Lucintel report serves as a spring board for growth strategies as it provides comprehensive data and analysis on trends, key drivers, and directions. The study includes a forecast for FRP pipes in the North Amercian market through 2020, segmented by end-use industry, material type, and region as follows:
- By end use industry [Volume (Million Pounds/Kiloton) and Value $ Million from 2015 to 2020]-
- Onshore Oil and Gas
- Retail Fuel
- Water/Wastewater
- Sewage
- Pulp/Paper
- Chemical/Industry
- Offshore Oil and Gas
- Power
- Other
- By material type [Volume (Million Pounds/Kiloton) and Value $ Million from 2015 to 2020]-
- Glass Fiber
- Carbon Fiber
- Polyester Resin
- Vinyl Ester Resin
- Epoxy Resin
- By region [Volume (Million Pounds/Kiloton) and Value $ Million from 2015 to 2020]-
- North America
- Europe
- Asia Pacific
- Rest of World
To make business, investment, and strategic decisions, you need timely, useful information. This market report fulfills this core need and is an indispensable reference guide for multinational materials suppliers, product manufacturers, investors, executives, distributors, and many more that operate in this market.
Some of the features of “Opportunities for FRP Pipes in North America 2015-2020: Market Size, Market Share, and Forecast Analysis” include:
- Market size estimates: FRP Pipes in North America market size estimation in terms of volume (M lbs.) and value ($M) shipment.
- Trend and forecast analysis: FRP Pipes in North America market trend (2009-2014) and forecast (2015-2020) by regions, products and applications.
- Segmentation analysis: FRP Pipes in North America market size by application segments such as onshore oil & gas, retail fuel, water/wastewater, sewage, pulp/paper, chemical, offshore oil & gas, power and other in terms of value shipment.
- Regional analysis: FRP Pipes in North America market breakdown by key regions such as Northeastern US, Southern US, Midwestern US, Canada, Western US, Texas & OK.
- Growth opportunities: Analysis on growth opportunities in different applications, products, and regions.
- Strategic analysis: This includes M&A, new product development, competitive landscape, and expansion strategies of FRP Pipes in North America market suppliers.
- Analysis of competitive intensity of the industry based on Porter’s Five Forces model.
1.EXECUTIVE SUMMARY
2.NORTH AMERICAN FRP PIPE MARKET BACKGROUND AND CHARACTERISTICS
2.1. Introduction
2.1.1. FRP Pipe Manufacturing Process
2.1.2. Industry Classifications and Market Served
2.1.3. Supply Chain in the North American FRP Pipe Market
2.2. Porter's Five Forces Analysis of North American FRP Pipe Market
3.NORTH AMERICAN FRP PIPE MARKET ANALYSIS
3.1. FRP Pipe Market Analysis 2014
3.1.1. Composite Materials Used for FRP Pipes
3.1.2. FRP Pipe Market Analysis by Manufacturing Process
3.1.3. Regional Market Size
3.2. Market Trends 2009-2014
3.2.1. Macroeconomic Trends
3.2.2. End Market Trends
3.3. Market Trends in North American FRP Pipe Market 2009-2014
3.3.1. FRP Pipe Market Segmentation by Application
3.3.2. FRP Pipe Market by Diameter Size of Pipe
3.3.3. Trends of North American FRP Pipes in Onshore Oil & Gas Market (2009-2014).
3.3.4. Trends of North American FRP Pipes in Retail Fuel Market (2009-2014)
3.3.5. Trends of North American FRP Pipes in Water/Wastewater Market (2009-2014)
3.3.6. Trends of North American FRP Pipes in Sewage Market (2009-2014)
3.3.7. Trends of North American FRP Pipes in Pulp/Paper Market (2009-2014)
3.3.8. Trends of North American FRP Pipes in Chemical Market (2009-2014)
3.3.9. Trend of North American FRP Pipes in Offshore Oil and Gas Market(2009-2014).136
3.3.10. Trend of North American FRP Pipes in Power Market (2009-2014)
3.3.11. Trend of North American FRP Pipes in Others Market (2009-2014)
3.3.12. Raw Material Trend
3.4. Drivers and Challenges for North American FRP Pipe Market
3.5. Market Forecasts of North American FRP Pipe Market (2015-2020)
3.5.1. Macroeconomic Forecast
3.5.2. Market Forecasts of North American FRP Pipe Market (2015-2020)
3.5.3. North America FRP Pipe Market Forecast by Size
3.5.4. North American FRP Pipe Market Forecast by Raw Material
4.COMPETITIVE LANDSCAPE AND GROWTH OPPORTUNITIES ANALYSIS
4.1. Product Portfolio Analysis
4.2. Market Share Analysis
4.3. Geographical Reach
4.4. Growth Leadership Analysis
4.5. Growth Opportunity Analysis
4.5.1. Growth Opportunities in North American FRP Pipe Market by Application
5.STRATEGIC ASSESSMENT OF THE MARKET
5.1. Emerging (Application) Trends in North American FRP Pipe Market
5.1.1. Emerging Trends in North American FRP Pipe Market
5.2. Innovations and New Product Launches in North American FRP Pipe Marke
5.3. Mergers and Acquisitions in North American FRP Pipe Market
5.4. Expansion of FRP Pipe Production Bases
6. COMPANY PROFILES OF LEADING PLAYERS
7. CUSTOMER ANALYSIS
7.1. Customer in Different Segments
7.2. Customer's Geographic Reach
7.3. Major Customer Profiles
ABBREVIATIONS AND TECHNICAL UNITS
DISCLAIMER
COPYRIGHT
ABOUT US
LIST OF FIGURES
CHAPTER 2. NORTH AMERICAN FRP PIPE MARKET BACKGROUND AND CHARACTERISTICS
Figure 2.1: Evolution in Corrosion Applications for Composite Products from 1950 Onwards
Figure 2.2: Evolution in Piping Technologies
Figure 2.3: Raw Material Flow Chart in Pipe Manufacturing
Figure 2.4: A Filament Winding Machine
Figure 2.5: Chopper Gun Used for Spray-Up Process
Figure 2.6: Evolution in Standards for Fiberglass Pipes
Figure 2.7: FRP Pipe for Corrosion Resistance
Figure 2.8: FRP Pipe for Oil Field Application
Figure 2.9: FRP Pipe for Retail Petroleum Application
Figure 2.10: FRP Pipe for Chemical Application
Figure 2.11: FRP Pipe for Wastewater Application
Figure 2.12: FRP Fire Water Deluge Pipe (Ameron/NOV)
Figure 2.13: FRP Pipe for Pulp/Paper Application
Figure 2.14: FRP Pipe for Water Application
Figure 2.15: FRP Pipe for Power Application
Figure 2.16: FRP Pipe for Industrial Application
Figure 2.17: FRP Pipe for Offshore Application
Figure 2.18: FRP Pipe for Marine/Offshore Application
Figure 2.19: FRP Pipe for Marine Application
Figure 2.20: FRP Pipe Applications
Figure 2.21: FRP Pipe Image
Figure 2.22: Odor Control Duct Work at Alcosan Wastewater Treatment Plant
Figure 2.23: Samples of Fiberglass Pipes and Ducts
Figure 2.24: Fiberglass Pipeline Installed within an Existing Concrete Pipe
Figure 2.25: Fiberglass Piping for Boise Bleaches Plant
Figure 2.26: Fiberglass Pipe for an Underground Effluent Pipe
Figure 2.27: Digester Exhaust Duct and Blow Stack
Figure 2.28: Bleach Plant Process Pipe
Figure 2.29: Access Tees Fitted with Mechanical Joint by Flange Adapters
Figure 2.30: Large Diameter Fiberglass Pipes
Figure 2.31: Supply Chain Analysis for North American FRP Pipe Market
Figure 2.34: Porter’s Five Forces Analysis for North American FRP Pipe Market
CHAPTER 3. NORTH AMERICAN FRP PIPE MARKET ANALYSIS
Figure 3.1: North American FRP Pipe Market Breakdown by Application in 2014
Figure 3.2: North American FRP Pipe Market ($ Million) in Different Application for year 2014
Figure 3.3: North American FRP Pipe Market Distribution by Application in Million Pounds
Figure 3.4: North American FRP Pipe Market by Million Feet in Major Market Segments in 2014
Figure 3.5: Resin Material Consumption in ($ M) North American FRP Pipe Market in 2014
Figure 3.6: Resin Material Consumption in (Million Pounds) North American FRP Pipe Market in 2014
Figure 3.7: North American FRP Pipe Material Consumption by Resin Type (Million Pounds) in 2014
Figure 3.8: North American FRP Pipe Market (Million Pounds) by Material in 2014
Figure 3.9: North American FRP Pipe Market (Million Pounds) by Material in 2014
Figure 3.10: North American FRP Pipe Market ($ Million) Distribution by Manufacturing Process in 2014
Figure 3.11: North American FRP Pipe Market ($ Million) by Manufacturing Process in 2014
Figure 3.12: North American FRP Pipe Market Distribution ($ Million) by Region in 2014
Figure 3.13: North America GDP Growth Rate Trend from 2009 to 2014
Figure 3.14: FRP Pipes Used in Exploration and Distribution of Oil and Gas
Figure 3.15: Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory and Development Wells from 2000 to 2010 in US
Figure 3.16: Distribution of Natural Gas and Crude Oil Wells in 2010
Figure 3.17: Fiberglass Pipes in Oil and Gas Industry in 2014
Figure 3.18: FRP Pipe Joints
Figure 3.19: SCP (Spoolable Carbon Fiber Pipe)
Figure 3.20: North American FRP Pipe Market Distribution in Onshore Oil and Gas Application in 2014
Figure 3.21: North American FRP Pipe Market in Onshore Oil and Gas Application in 2014
Figure 3.22: Market Leaders in FRP Pipes Used for Application in Onshore Oil/Gas North America in 2014
Figure 3.23: Image of FRP Column Pipe Applications on Offshore Structures
Figure 3.24: North American FRP Pipe Market in Offshore Oil and Gas Application in 2014
Figure 3.25: Market Leaders in FRP Pipes Used for Offshore Oil and Gas Applications in North America in 2014
Figure 3.26: Shipment Trend in Canada for Alkali and Chlorine in Terms of Current Dollar
Figure 3.27: Shipment Trend in Canada for Other Basic Inorganic Chemical
Figure 3.28: North American FRP Pipe Market Distribution ($ Million) in Chemical Application in 2014
Figure 3.29: North American FRP Pipe Market ($ Million) in Chemical Application in 2014
Figure 3.30: Market Leaders in Fiberglass Pipe Used for Chemical Application in North America
Figure 3.31: FRP Pipes Used in Petroleum Industry
Figure 3.32: North American FRP Pipe Market Distribution ($ Million) in Retail Fuel Application in 2014
Figure 3.33: North American FRP Pipe Market Distribution in Retail Fuel Application in 2014
Figure 3.34: Market Leaders in FRP Pipes Used in Retail Fuel Application in North America in 2014
Figure 3.35: North American Paper and Packaging Industry Trend ($ Million) from 2009 to 2014
Figure 3.36: Annual Growth Rates in Paper and Packaging Industry in North America
Figure 3.37: North American FRP Pipe Market Distribution ($ Million) in Pulp/Paper Application in 2014
Figure 3.38: North American FRP Pipe Market in Pulp/Paper Application in 2014
Figure 3.39: FRP Pipes Used in Water and Wastewater Treatment Plant
Figure 3.40: North American FRP Pipe Market Distribution in Water/ Wastewater Application in 2014
Figure 3.41: North American FRP Pipe in Water/Wastewater Application in 2014
Figure 3.42: FRP Pipe Market Used for Sewage Application
Figure 3.43: North American FRP Pipe Market Distribution in Sewage Application in 2014
Figure 3.44: North American FRP Pipe Market Distribution in Sewage Application in 2014
Figure 3.45: Central Puerto Power Thermoelectric Plant in Capital Federal
Figure 3.46: 12m FRP Pipe in Power Plant
Figure 3.47: Market Leaders in FRP Pipe Used for Power Application in North America in 2014
Figure 3.48: North American FRP Pipe Market Distribution in Power Application in 2014
Figure 3.49: North American FRP Pipe Market in Power Application in 2014
Figure 3.50: Recirculation FRP Pipe in Powerhouse
Figure 3.51: North America FRP Pipe Market Trend ($ Million) from 2009 to 2014
Figure 3.52: CAGR in North American FRP Pipe Market from 2009 to 2014
Figure 3.53: CAGR for North American FRP Pipe Market ($ Million) by Application from 2009 to 2014
Figure 3.54: Growth Rate for North American FRP Pipe Market ($ Million) by Application from 2013 to 2014
Figure 3.55: North American FRP Pipe Market Distribution by Application in 2009
Figure 3.56: North American FRP Pipe Market Distribution by Application in 2014
Figure 3.57: North American FRP Pipe Market ($ Million) by Major Market Segment in 2009
Figure 3.58: North American FRP Pipe Market Distribution (M lbs) by Application in 2009
Figure 3.59: North American FRP Pipe Market Distribution (M lbs) by Application in 2014
Figure 3.60: FRP Pipe Market Distribution in Number of Million Feet by Major Market Segment in 2009
Figure 3.61: FRP Pipe Market Distribution in Number of Million Feet by Major Market Segment in 2014
Figure 3.62: North American FRP Pipe Market in Million Feet by Major Market Segment in 2009
Figure 3.63: North American FRP Pipe Market in Million Feet by Major Market Segment in 2014
Figure 3.64: North American FRP Pipe Market ($ Million) by Application in 2009
Figure 3.65: North American FRP Pipe Market ($ Million) by Application in 2014
Figure 3.66: North American FRP Pipe Market Distribution ($ Million) by Size of Diameter in 2009
Figure 3.67: North American FRP Pipe Market Distribution ($ Million Pounds) by Size of Diameter in 2014
Figure 3.68: North American FRP Pipe Market Distribution ($ Million) by Size of Diameter in 2009
Figure 3.69: North American FRP Pipe Market Breakdown ($ Million) by Size of Diameter in 2014
Figure 3.70: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2009
Figure 3.71: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2014
Figure 3.72: North American FRP Pipe Market Breakdown (Million Pounds) by Size of Diameter in 2009
Figure 3.73: North American FRP Pipe Market Breakdown (Million Pounds) by Size of Diameter in 2014
Figure 3.75: North American FRP Pipe Market Distribution ($ Million) by Small Diameter in Various Applications in 2014
Figure 3.76: North American FRP Pipe Market Breakdown (Million Pounds) by Small Diameter in Various Applications in 2014
Figure 3.77: Distribution of Small Diameter FRP Pipe Market (Million Feet) in North America by Market Segment in 2014
Figure 3.78: Small Diameter FRP Pipe Market by Million Feet in North America in 2014
Figure 3.79: Polyester Resin Material Consumption in Small Diameter FRP Pipes by Market (Million Pounds) Segment in 2014
Figure 3.80: Vinyl Ester Resin Material Consumption (Million Pounds) in Small Diameter FRP Pipes by Market Segment in 2014
Figure 3.81: Epoxy Resin Material Consumption (Million Pounds) in Small Diameter FRP Pipes by Market Segment in 2014
Figure 3.82: Large Diameter FRP Pipes
Figure 3.83: North American FRP Pipe Market ($ Million) Distribution by Large Diameter in Various Applications for 2014
Figure 3.84: North American FRP Pipe Market Breakdown (Million Pounds) by Large Diameter in Various Applications for 2014
Figure 3.85: North American FRP Pipe Market Breakdown (Million Pounds) by Large Diameter in Various Applications for 2014
Figure 3.86: Distribution of Large Diameter FRP Pipe Market in North America by Million Feet in 2014
Figure 3.87: North American FRP Pipe Market Distribution by Large Diameter (Million Pounds) in 2014
Figure 3.88: North American FRP Pipe Market Trend ($ Million) for Onshore Oil & Gas Application from 2009 to 2014
Figure 3.89: North American FRP Pipe Market Trend ($ Million) for Retail Fuel Application from 2009 to 2014
Figure 3.90: North American FRP Pipe Market Trend ($ Million) for Water/Wastewater Application from 2009 to 2014
Figure 3.91: North American FRP Pipe Market Trend ($ Million) for Water/Wastewater Application from 2009 to 2014
Figure 3.92: North American FRP Pipe Market Trend ($ Million) for Pulp/Paper Application from 2009 to 2014
Figure 3.93: North American FRP Pipe Market Trend ($ Million) for Chemical Application from 2009 to 2014
Figure 3.94: North American FRP Pipe Market Trend ($ Million) for Offshore Oil and Gas Application from 2009 to 2014
Figure 3.95: North American FRP Pipe Market Trend ($ Million) for Power Application from 2009 to 2014
Figure 3.96: North American FRP Pipe Market Trend ($ Million) for Other Application from 2009 to 2014
Figure 3.97: North American FRP Pipe Market (Million Pounds) by Material in 2009
Figure 3.98: North American FRP Pipe Market (Million Pounds) by Composite Material in 2009 Figure 3.99: North American FRP Pipe Market (Million Pounds) by Material in 2014
Figure 3.100: North American FRP Pipe Market (Million Pounds) by Composite Material in 2014
Figure 3.101: North American FRP Pipe Market (Million Pounds) by Material in 2009
Figure 3.102: North American FRP Pipe Composite Material Consumption (Million Pounds) in 2014
Figure 3.103: Drivers and Challenges for North American FRP Pipe Market
Figure 3.104: Growth Drivers and Their Impacts on FRP Pipe Market
Figure 3.105: North American GDP Growth Rate Forecast 2015-2020
Figure 3.106: North American FRP Pipe Market ($ Million) Forecast from 2015 to 2020
Figure 3.107: CAGR of North American FRP Pipe Market Forecast ($ Million) from 2015 to 2020
Figure 3.108: Growth Forecast for North American FRP Pipe Market by Application from 2014 to 2015
Figure 3.109: CAGR for NA FRP Pipe Market ($ Million) by Application from 2015 to 2020
Figure 3.110: North American FRP Pipe Market Distribution ($ Million) by Application in 2015
Figure 3.111: North American FRP Pipe Market ($ Million) by Application in 2015
Figure 3.112: North American FRP Pipe Market Distribution ($ Million) by Application in 2020
Figure 3.113: North American FRP Pipe Market ($ Million) by Application in 2020
Figure 3.114: North American FRP Pipe Market Distribution (Million Pounds) by Application in 2015
Figure 3.115: North American FRP Pipe Market Distribution (Million Pounds) for Application in 2020
Figure 3.116: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2015
Figure 3.117: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2020
Figure 3.118: North American FRP Pipe Market Distribution ($ Million) by Large Diameter in Various Applications in 2015
Figure 3.119: North American FRP Pipe Market Breakdown ($ Million) by Small Diameter in Various Applications in 2020
Figure 3.120: North American FRP Pipe Market Distribution (Million Pound) by Large Diameter in Various Applications in 2020
Figure 3.121: North American FRP Pipe Market Distribution ($ Million) by Small Diameter in Various Applications in 2015
Figure 3.122: North American FRP Pipe Market Distribution ($ Million) by Small Diameter in Various Applications in 2020
Figure 3.123: North American FRP Pipe Market Distribution (Million Pounds) by Large Diameter in Various Applications in 2015
Figure 3.124: North American FRP Pipe Market Distribution (Million Pounds) by Small Diameter in Various Applications in 2015
Figure 3.125: North American FRP Pipe Market Distribution (Million Pounds) by Small Diameter in Various Applications in 2020
Figure 3.126: North American FRP Pipe Market by Resin Material Consumption (Million Pounds) in 2015
Figure 3.127: North American FRP Pipe Market by Material (Million Pounds) in 2015
Figure 3.128: North American FRP Pipe Market by Resin Material Consumption (Million Pounds) in 2020
Figure 3.129: North American FRP Pipe Market (Million Pounds) by Material in 2020
CHAPTER 4. COMPETITIVE LANDSCAPE AND GROWTH OPPORTUNITIES ANALYSIS
Figure 4.1: North American FRP Pipe Market Share Analysis in 2014
Figure 4.2: North American FRP Pipe Market Consolidation Analysis
Figure 4.3: North American FRP Pipe Market geographical reach
Figure 4.4: Growth Leadership Matrix in North American FRP Pipe Market
Figure 4.5: North American FRP Pipe Market from 2009 to 2014)
Figure 4.6: Growth Matrix of North America FRP Pipe Market (2015-2020)
CHAPTER 5. STRATEGIC ASSESSMENT OF THE MARKET
Figure 5.1: Emerging Applications of FRP Pipes with Future Growth Potential
Figure 5.2: Emerging Trends in North American FRP Pipe Market
2.NORTH AMERICAN FRP PIPE MARKET BACKGROUND AND CHARACTERISTICS
2.1. Introduction
2.1.1. FRP Pipe Manufacturing Process
2.1.2. Industry Classifications and Market Served
2.1.3. Supply Chain in the North American FRP Pipe Market
2.2. Porter's Five Forces Analysis of North American FRP Pipe Market
3.NORTH AMERICAN FRP PIPE MARKET ANALYSIS
3.1. FRP Pipe Market Analysis 2014
3.1.1. Composite Materials Used for FRP Pipes
3.1.2. FRP Pipe Market Analysis by Manufacturing Process
3.1.3. Regional Market Size
3.2. Market Trends 2009-2014
3.2.1. Macroeconomic Trends
3.2.2. End Market Trends
3.3. Market Trends in North American FRP Pipe Market 2009-2014
3.3.1. FRP Pipe Market Segmentation by Application
3.3.2. FRP Pipe Market by Diameter Size of Pipe
3.3.3. Trends of North American FRP Pipes in Onshore Oil & Gas Market (2009-2014).
3.3.4. Trends of North American FRP Pipes in Retail Fuel Market (2009-2014)
3.3.5. Trends of North American FRP Pipes in Water/Wastewater Market (2009-2014)
3.3.6. Trends of North American FRP Pipes in Sewage Market (2009-2014)
3.3.7. Trends of North American FRP Pipes in Pulp/Paper Market (2009-2014)
3.3.8. Trends of North American FRP Pipes in Chemical Market (2009-2014)
3.3.9. Trend of North American FRP Pipes in Offshore Oil and Gas Market(2009-2014).136
3.3.10. Trend of North American FRP Pipes in Power Market (2009-2014)
3.3.11. Trend of North American FRP Pipes in Others Market (2009-2014)
3.3.12. Raw Material Trend
3.4. Drivers and Challenges for North American FRP Pipe Market
3.5. Market Forecasts of North American FRP Pipe Market (2015-2020)
3.5.1. Macroeconomic Forecast
3.5.2. Market Forecasts of North American FRP Pipe Market (2015-2020)
3.5.3. North America FRP Pipe Market Forecast by Size
3.5.4. North American FRP Pipe Market Forecast by Raw Material
4.COMPETITIVE LANDSCAPE AND GROWTH OPPORTUNITIES ANALYSIS
4.1. Product Portfolio Analysis
4.2. Market Share Analysis
4.3. Geographical Reach
4.4. Growth Leadership Analysis
4.5. Growth Opportunity Analysis
4.5.1. Growth Opportunities in North American FRP Pipe Market by Application
5.STRATEGIC ASSESSMENT OF THE MARKET
5.1. Emerging (Application) Trends in North American FRP Pipe Market
5.1.1. Emerging Trends in North American FRP Pipe Market
5.2. Innovations and New Product Launches in North American FRP Pipe Marke
5.3. Mergers and Acquisitions in North American FRP Pipe Market
5.4. Expansion of FRP Pipe Production Bases
6. COMPANY PROFILES OF LEADING PLAYERS
7. CUSTOMER ANALYSIS
7.1. Customer in Different Segments
7.2. Customer's Geographic Reach
7.3. Major Customer Profiles
ABBREVIATIONS AND TECHNICAL UNITS
DISCLAIMER
COPYRIGHT
ABOUT US
LIST OF FIGURES
CHAPTER 2. NORTH AMERICAN FRP PIPE MARKET BACKGROUND AND CHARACTERISTICS
Figure 2.1: Evolution in Corrosion Applications for Composite Products from 1950 Onwards
Figure 2.2: Evolution in Piping Technologies
Figure 2.3: Raw Material Flow Chart in Pipe Manufacturing
Figure 2.4: A Filament Winding Machine
Figure 2.5: Chopper Gun Used for Spray-Up Process
Figure 2.6: Evolution in Standards for Fiberglass Pipes
Figure 2.7: FRP Pipe for Corrosion Resistance
Figure 2.8: FRP Pipe for Oil Field Application
Figure 2.9: FRP Pipe for Retail Petroleum Application
Figure 2.10: FRP Pipe for Chemical Application
Figure 2.11: FRP Pipe for Wastewater Application
Figure 2.12: FRP Fire Water Deluge Pipe (Ameron/NOV)
Figure 2.13: FRP Pipe for Pulp/Paper Application
Figure 2.14: FRP Pipe for Water Application
Figure 2.15: FRP Pipe for Power Application
Figure 2.16: FRP Pipe for Industrial Application
Figure 2.17: FRP Pipe for Offshore Application
Figure 2.18: FRP Pipe for Marine/Offshore Application
Figure 2.19: FRP Pipe for Marine Application
Figure 2.20: FRP Pipe Applications
Figure 2.21: FRP Pipe Image
Figure 2.22: Odor Control Duct Work at Alcosan Wastewater Treatment Plant
Figure 2.23: Samples of Fiberglass Pipes and Ducts
Figure 2.24: Fiberglass Pipeline Installed within an Existing Concrete Pipe
Figure 2.25: Fiberglass Piping for Boise Bleaches Plant
Figure 2.26: Fiberglass Pipe for an Underground Effluent Pipe
Figure 2.27: Digester Exhaust Duct and Blow Stack
Figure 2.28: Bleach Plant Process Pipe
Figure 2.29: Access Tees Fitted with Mechanical Joint by Flange Adapters
Figure 2.30: Large Diameter Fiberglass Pipes
Figure 2.31: Supply Chain Analysis for North American FRP Pipe Market
Figure 2.34: Porter’s Five Forces Analysis for North American FRP Pipe Market
CHAPTER 3. NORTH AMERICAN FRP PIPE MARKET ANALYSIS
Figure 3.1: North American FRP Pipe Market Breakdown by Application in 2014
Figure 3.2: North American FRP Pipe Market ($ Million) in Different Application for year 2014
Figure 3.3: North American FRP Pipe Market Distribution by Application in Million Pounds
Figure 3.4: North American FRP Pipe Market by Million Feet in Major Market Segments in 2014
Figure 3.5: Resin Material Consumption in ($ M) North American FRP Pipe Market in 2014
Figure 3.6: Resin Material Consumption in (Million Pounds) North American FRP Pipe Market in 2014
Figure 3.7: North American FRP Pipe Material Consumption by Resin Type (Million Pounds) in 2014
Figure 3.8: North American FRP Pipe Market (Million Pounds) by Material in 2014
Figure 3.9: North American FRP Pipe Market (Million Pounds) by Material in 2014
Figure 3.10: North American FRP Pipe Market ($ Million) Distribution by Manufacturing Process in 2014
Figure 3.11: North American FRP Pipe Market ($ Million) by Manufacturing Process in 2014
Figure 3.12: North American FRP Pipe Market Distribution ($ Million) by Region in 2014
Figure 3.13: North America GDP Growth Rate Trend from 2009 to 2014
Figure 3.14: FRP Pipes Used in Exploration and Distribution of Oil and Gas
Figure 3.15: Footage Drilled for Crude Oil, Natural Gas, and Dry Exploratory and Development Wells from 2000 to 2010 in US
Figure 3.16: Distribution of Natural Gas and Crude Oil Wells in 2010
Figure 3.17: Fiberglass Pipes in Oil and Gas Industry in 2014
Figure 3.18: FRP Pipe Joints
Figure 3.19: SCP (Spoolable Carbon Fiber Pipe)
Figure 3.20: North American FRP Pipe Market Distribution in Onshore Oil and Gas Application in 2014
Figure 3.21: North American FRP Pipe Market in Onshore Oil and Gas Application in 2014
Figure 3.22: Market Leaders in FRP Pipes Used for Application in Onshore Oil/Gas North America in 2014
Figure 3.23: Image of FRP Column Pipe Applications on Offshore Structures
Figure 3.24: North American FRP Pipe Market in Offshore Oil and Gas Application in 2014
Figure 3.25: Market Leaders in FRP Pipes Used for Offshore Oil and Gas Applications in North America in 2014
Figure 3.26: Shipment Trend in Canada for Alkali and Chlorine in Terms of Current Dollar
Figure 3.27: Shipment Trend in Canada for Other Basic Inorganic Chemical
Figure 3.28: North American FRP Pipe Market Distribution ($ Million) in Chemical Application in 2014
Figure 3.29: North American FRP Pipe Market ($ Million) in Chemical Application in 2014
Figure 3.30: Market Leaders in Fiberglass Pipe Used for Chemical Application in North America
Figure 3.31: FRP Pipes Used in Petroleum Industry
Figure 3.32: North American FRP Pipe Market Distribution ($ Million) in Retail Fuel Application in 2014
Figure 3.33: North American FRP Pipe Market Distribution in Retail Fuel Application in 2014
Figure 3.34: Market Leaders in FRP Pipes Used in Retail Fuel Application in North America in 2014
Figure 3.35: North American Paper and Packaging Industry Trend ($ Million) from 2009 to 2014
Figure 3.36: Annual Growth Rates in Paper and Packaging Industry in North America
Figure 3.37: North American FRP Pipe Market Distribution ($ Million) in Pulp/Paper Application in 2014
Figure 3.38: North American FRP Pipe Market in Pulp/Paper Application in 2014
Figure 3.39: FRP Pipes Used in Water and Wastewater Treatment Plant
Figure 3.40: North American FRP Pipe Market Distribution in Water/ Wastewater Application in 2014
Figure 3.41: North American FRP Pipe in Water/Wastewater Application in 2014
Figure 3.42: FRP Pipe Market Used for Sewage Application
Figure 3.43: North American FRP Pipe Market Distribution in Sewage Application in 2014
Figure 3.44: North American FRP Pipe Market Distribution in Sewage Application in 2014
Figure 3.45: Central Puerto Power Thermoelectric Plant in Capital Federal
Figure 3.46: 12m FRP Pipe in Power Plant
Figure 3.47: Market Leaders in FRP Pipe Used for Power Application in North America in 2014
Figure 3.48: North American FRP Pipe Market Distribution in Power Application in 2014
Figure 3.49: North American FRP Pipe Market in Power Application in 2014
Figure 3.50: Recirculation FRP Pipe in Powerhouse
Figure 3.51: North America FRP Pipe Market Trend ($ Million) from 2009 to 2014
Figure 3.52: CAGR in North American FRP Pipe Market from 2009 to 2014
Figure 3.53: CAGR for North American FRP Pipe Market ($ Million) by Application from 2009 to 2014
Figure 3.54: Growth Rate for North American FRP Pipe Market ($ Million) by Application from 2013 to 2014
Figure 3.55: North American FRP Pipe Market Distribution by Application in 2009
Figure 3.56: North American FRP Pipe Market Distribution by Application in 2014
Figure 3.57: North American FRP Pipe Market ($ Million) by Major Market Segment in 2009
Figure 3.58: North American FRP Pipe Market Distribution (M lbs) by Application in 2009
Figure 3.59: North American FRP Pipe Market Distribution (M lbs) by Application in 2014
Figure 3.60: FRP Pipe Market Distribution in Number of Million Feet by Major Market Segment in 2009
Figure 3.61: FRP Pipe Market Distribution in Number of Million Feet by Major Market Segment in 2014
Figure 3.62: North American FRP Pipe Market in Million Feet by Major Market Segment in 2009
Figure 3.63: North American FRP Pipe Market in Million Feet by Major Market Segment in 2014
Figure 3.64: North American FRP Pipe Market ($ Million) by Application in 2009
Figure 3.65: North American FRP Pipe Market ($ Million) by Application in 2014
Figure 3.66: North American FRP Pipe Market Distribution ($ Million) by Size of Diameter in 2009
Figure 3.67: North American FRP Pipe Market Distribution ($ Million Pounds) by Size of Diameter in 2014
Figure 3.68: North American FRP Pipe Market Distribution ($ Million) by Size of Diameter in 2009
Figure 3.69: North American FRP Pipe Market Breakdown ($ Million) by Size of Diameter in 2014
Figure 3.70: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2009
Figure 3.71: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2014
Figure 3.72: North American FRP Pipe Market Breakdown (Million Pounds) by Size of Diameter in 2009
Figure 3.73: North American FRP Pipe Market Breakdown (Million Pounds) by Size of Diameter in 2014
Figure 3.75: North American FRP Pipe Market Distribution ($ Million) by Small Diameter in Various Applications in 2014
Figure 3.76: North American FRP Pipe Market Breakdown (Million Pounds) by Small Diameter in Various Applications in 2014
Figure 3.77: Distribution of Small Diameter FRP Pipe Market (Million Feet) in North America by Market Segment in 2014
Figure 3.78: Small Diameter FRP Pipe Market by Million Feet in North America in 2014
Figure 3.79: Polyester Resin Material Consumption in Small Diameter FRP Pipes by Market (Million Pounds) Segment in 2014
Figure 3.80: Vinyl Ester Resin Material Consumption (Million Pounds) in Small Diameter FRP Pipes by Market Segment in 2014
Figure 3.81: Epoxy Resin Material Consumption (Million Pounds) in Small Diameter FRP Pipes by Market Segment in 2014
Figure 3.82: Large Diameter FRP Pipes
Figure 3.83: North American FRP Pipe Market ($ Million) Distribution by Large Diameter in Various Applications for 2014
Figure 3.84: North American FRP Pipe Market Breakdown (Million Pounds) by Large Diameter in Various Applications for 2014
Figure 3.85: North American FRP Pipe Market Breakdown (Million Pounds) by Large Diameter in Various Applications for 2014
Figure 3.86: Distribution of Large Diameter FRP Pipe Market in North America by Million Feet in 2014
Figure 3.87: North American FRP Pipe Market Distribution by Large Diameter (Million Pounds) in 2014
Figure 3.88: North American FRP Pipe Market Trend ($ Million) for Onshore Oil & Gas Application from 2009 to 2014
Figure 3.89: North American FRP Pipe Market Trend ($ Million) for Retail Fuel Application from 2009 to 2014
Figure 3.90: North American FRP Pipe Market Trend ($ Million) for Water/Wastewater Application from 2009 to 2014
Figure 3.91: North American FRP Pipe Market Trend ($ Million) for Water/Wastewater Application from 2009 to 2014
Figure 3.92: North American FRP Pipe Market Trend ($ Million) for Pulp/Paper Application from 2009 to 2014
Figure 3.93: North American FRP Pipe Market Trend ($ Million) for Chemical Application from 2009 to 2014
Figure 3.94: North American FRP Pipe Market Trend ($ Million) for Offshore Oil and Gas Application from 2009 to 2014
Figure 3.95: North American FRP Pipe Market Trend ($ Million) for Power Application from 2009 to 2014
Figure 3.96: North American FRP Pipe Market Trend ($ Million) for Other Application from 2009 to 2014
Figure 3.97: North American FRP Pipe Market (Million Pounds) by Material in 2009
Figure 3.98: North American FRP Pipe Market (Million Pounds) by Composite Material in 2009 Figure 3.99: North American FRP Pipe Market (Million Pounds) by Material in 2014
Figure 3.100: North American FRP Pipe Market (Million Pounds) by Composite Material in 2014
Figure 3.101: North American FRP Pipe Market (Million Pounds) by Material in 2009
Figure 3.102: North American FRP Pipe Composite Material Consumption (Million Pounds) in 2014
Figure 3.103: Drivers and Challenges for North American FRP Pipe Market
Figure 3.104: Growth Drivers and Their Impacts on FRP Pipe Market
Figure 3.105: North American GDP Growth Rate Forecast 2015-2020
Figure 3.106: North American FRP Pipe Market ($ Million) Forecast from 2015 to 2020
Figure 3.107: CAGR of North American FRP Pipe Market Forecast ($ Million) from 2015 to 2020
Figure 3.108: Growth Forecast for North American FRP Pipe Market by Application from 2014 to 2015
Figure 3.109: CAGR for NA FRP Pipe Market ($ Million) by Application from 2015 to 2020
Figure 3.110: North American FRP Pipe Market Distribution ($ Million) by Application in 2015
Figure 3.111: North American FRP Pipe Market ($ Million) by Application in 2015
Figure 3.112: North American FRP Pipe Market Distribution ($ Million) by Application in 2020
Figure 3.113: North American FRP Pipe Market ($ Million) by Application in 2020
Figure 3.114: North American FRP Pipe Market Distribution (Million Pounds) by Application in 2015
Figure 3.115: North American FRP Pipe Market Distribution (Million Pounds) for Application in 2020
Figure 3.116: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2015
Figure 3.117: North American FRP Pipe Market Distribution (Million Pounds) by Size of Diameter in 2020
Figure 3.118: North American FRP Pipe Market Distribution ($ Million) by Large Diameter in Various Applications in 2015
Figure 3.119: North American FRP Pipe Market Breakdown ($ Million) by Small Diameter in Various Applications in 2020
Figure 3.120: North American FRP Pipe Market Distribution (Million Pound) by Large Diameter in Various Applications in 2020
Figure 3.121: North American FRP Pipe Market Distribution ($ Million) by Small Diameter in Various Applications in 2015
Figure 3.122: North American FRP Pipe Market Distribution ($ Million) by Small Diameter in Various Applications in 2020
Figure 3.123: North American FRP Pipe Market Distribution (Million Pounds) by Large Diameter in Various Applications in 2015
Figure 3.124: North American FRP Pipe Market Distribution (Million Pounds) by Small Diameter in Various Applications in 2015
Figure 3.125: North American FRP Pipe Market Distribution (Million Pounds) by Small Diameter in Various Applications in 2020
Figure 3.126: North American FRP Pipe Market by Resin Material Consumption (Million Pounds) in 2015
Figure 3.127: North American FRP Pipe Market by Material (Million Pounds) in 2015
Figure 3.128: North American FRP Pipe Market by Resin Material Consumption (Million Pounds) in 2020
Figure 3.129: North American FRP Pipe Market (Million Pounds) by Material in 2020
CHAPTER 4. COMPETITIVE LANDSCAPE AND GROWTH OPPORTUNITIES ANALYSIS
Figure 4.1: North American FRP Pipe Market Share Analysis in 2014
Figure 4.2: North American FRP Pipe Market Consolidation Analysis
Figure 4.3: North American FRP Pipe Market geographical reach
Figure 4.4: Growth Leadership Matrix in North American FRP Pipe Market
Figure 4.5: North American FRP Pipe Market from 2009 to 2014)
Figure 4.6: Growth Matrix of North America FRP Pipe Market (2015-2020)
CHAPTER 5. STRATEGIC ASSESSMENT OF THE MARKET
Figure 5.1: Emerging Applications of FRP Pipes with Future Growth Potential
Figure 5.2: Emerging Trends in North American FRP Pipe Market
LIST OF TABLES
CHAPTER 1. EXECUTIVE SUMMARY
Table 1.1: Market Parameters for North American FRP Pipe, End-Product Attributes of Usage
Table 1.2: Market Parameters for Composite Materials in North American FRP Pipe Market and Attributes of Usage
CHAPTER 2. NORTH AMERICAN FRP PIPE MARKET BACKGROUND AND CHARACTERISTICS
Table 2.1: Manufacturing Processes Used by Select Fiberglass Pipe Manufacturers
Table 2.2: Natural Gas Transmission and Gathering Pipelines in US for 2007
Table 2.3: Gas Industry Miles of Pipeline in US for 2007
Table 2.4: Applications in Chemical & Industrial, Pulp & Paper, and Marine / Offshore
Table 2.5: Applications in Oil Field, Water & Wastewater, and Refinery
Table 2.6: Applications in Power Plant, HVAC and Food Processing
Table 2.7: Pipe Material Used in North Attleborough and Their Estimated Anticipated Service Life
CHAPTER 3. NORTH AMERICAN FRP PIPE MARKET ANALYSIS
Table 3.1: Competing Materials in Oil and Gas Market
Table 3.2: Suppliers of Jointed and Spoolable Composite Pipes
Table 3.3: U.S. Chlor-Alkali Production Forecast (Millions of tons)
Table 3.4: Price of Fiberglass Pipes in Sewage Application
Table 3.5: Market Size and Compound Annual Growth Rates During the Last Five Years (2007-2012) in Various Application Segments of North American FRP Pipe Markets
Table 3.6: Market Size and Annual Growth Rates from 2011 to 2012 in Various Application Segments of North American FRP Pipe Market
Table 3.7: North American Standards for Large Diameter Pipes
Table 3.8: Average Growth Rates in FRP Pipe Market for One and Five Years in North America for Oil and Gas Application
Table 3.9: Average Growth Rates for One and Five years in North American FRP Pipe Market for Retail Fuel Application
Table 3.10: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Water/Wastewater Application
Table 3.11: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Sewage Applications
Table 3.12: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Pulp/Paper Application
Table 3.13: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Pulp/Paper Application
Table 3.14: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Offshore/Marine Application
Table 3.15: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Power Application
Table 3.16: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Other Applications
Table 3.17: Comparison of Cost between FRP Pipe and Other Material Pipe
Table 3.18: Market Size and Annual Growth Forecasts for Next Five Years (2013-2018) in Various Applications of North American FRP Pipe Market
CHAPTER 4. COMPETITIVE LANDSCAPE AND GROWTH OPPORTUNITIES ANALYSIS
Table 4.1: Product Portfolio Analysis of Major Manufacturers in Major Market Segments
Table 4.2: Market Share Analysis of Top Five Companies in North American FRP Pipe Market
CHAPTER 5. STRATEGIC ASSESSMENT OF THE MARKET
Table 5.1: Mergers, Acquisitions, and Joint Ventures in North American FRP Pipe Market
CHAPTER 1. EXECUTIVE SUMMARY
Table 1.1: Market Parameters for North American FRP Pipe, End-Product Attributes of Usage
Table 1.2: Market Parameters for Composite Materials in North American FRP Pipe Market and Attributes of Usage
CHAPTER 2. NORTH AMERICAN FRP PIPE MARKET BACKGROUND AND CHARACTERISTICS
Table 2.1: Manufacturing Processes Used by Select Fiberglass Pipe Manufacturers
Table 2.2: Natural Gas Transmission and Gathering Pipelines in US for 2007
Table 2.3: Gas Industry Miles of Pipeline in US for 2007
Table 2.4: Applications in Chemical & Industrial, Pulp & Paper, and Marine / Offshore
Table 2.5: Applications in Oil Field, Water & Wastewater, and Refinery
Table 2.6: Applications in Power Plant, HVAC and Food Processing
Table 2.7: Pipe Material Used in North Attleborough and Their Estimated Anticipated Service Life
CHAPTER 3. NORTH AMERICAN FRP PIPE MARKET ANALYSIS
Table 3.1: Competing Materials in Oil and Gas Market
Table 3.2: Suppliers of Jointed and Spoolable Composite Pipes
Table 3.3: U.S. Chlor-Alkali Production Forecast (Millions of tons)
Table 3.4: Price of Fiberglass Pipes in Sewage Application
Table 3.5: Market Size and Compound Annual Growth Rates During the Last Five Years (2007-2012) in Various Application Segments of North American FRP Pipe Markets
Table 3.6: Market Size and Annual Growth Rates from 2011 to 2012 in Various Application Segments of North American FRP Pipe Market
Table 3.7: North American Standards for Large Diameter Pipes
Table 3.8: Average Growth Rates in FRP Pipe Market for One and Five Years in North America for Oil and Gas Application
Table 3.9: Average Growth Rates for One and Five years in North American FRP Pipe Market for Retail Fuel Application
Table 3.10: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Water/Wastewater Application
Table 3.11: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Sewage Applications
Table 3.12: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Pulp/Paper Application
Table 3.13: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Pulp/Paper Application
Table 3.14: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Offshore/Marine Application
Table 3.15: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Power Application
Table 3.16: Average Growth Rates for One and Five Years in North American FRP Pipe Market for Other Applications
Table 3.17: Comparison of Cost between FRP Pipe and Other Material Pipe
Table 3.18: Market Size and Annual Growth Forecasts for Next Five Years (2013-2018) in Various Applications of North American FRP Pipe Market
CHAPTER 4. COMPETITIVE LANDSCAPE AND GROWTH OPPORTUNITIES ANALYSIS
Table 4.1: Product Portfolio Analysis of Major Manufacturers in Major Market Segments
Table 4.2: Market Share Analysis of Top Five Companies in North American FRP Pipe Market
CHAPTER 5. STRATEGIC ASSESSMENT OF THE MARKET
Table 5.1: Mergers, Acquisitions, and Joint Ventures in North American FRP Pipe Market
