The World Market for Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick: A 2021 Global Trade Perspective
This report was created for strategic planners, international executives, and import/export managers who are concerned with the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. With the globalization of this market, managers can no longer be contented with a local view. Nor can managers be contented with out-of-date statistics that appear several years after the fact. I have developed a methodology, based on macroeconomic and trade models, to estimate the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for those countries serving the world market via exports or supplying from various countries via imports. I do so for the current year based on a variety of key historical indicators and econometric models.
On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers?
In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick (i.e. their market shares are close or equal to zero percent). 'Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick' as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines 'cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick' is 67552.
Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, 'mad cow' disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the 'net loss' or 'net gain' due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place.
Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. Closely related reports published by ICON Group include the following:
On the demand side, exporters and strategic planners approaching the world market face a number of questions. Which countries are supplying cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? What is the dollar value of these imports? How much do the imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick vary from one country to another? Do exporters serving the world market have similar market shares across the importing countries? Which countries supply the most exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick? Which countries are buying their exports? What is the value of these exports and which countries are the largest buyers?
In what follows, Chapter 2 begins by summarizing the regional markets for imported and exported cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. The total level of imports and exports on a worldwide basis, and those for each region, is based on a model which aggregates across over 150 key country markets and projects these to the current year. From there, each country represents a percent of the world market. This market is served from a number of competitive countries of origin. Based on both demand- and supply-side dynamics, market shares by country of origin are then calculated across each country market destination. These shares lead to a volume of import and export values for each country and are aggregated to regional and world totals. In doing so, we are able to obtain maximum likelihood estimates of both the value of each market and the shares that countries are likely to receive this year. From these figures, rankings are calculated to allow managers to prioritize markets. In this way, all the figures provided in this report are forecasts that can be combined with internal information for strategic planning purposes.
After the worldwide summary in Chapter 2 of both imports and exports, Chapter 3 details the exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick, for each individual country. Chapter 4 does the same, but for imports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick for all countries in the world. In all cases, the total dollar volume and percentage share values by major trading partner are provided. Combined, Chapters 3 and 4 present the complete picture for imports and exports of cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick to and from all major countries in the world. Of the 150 countries considered, if a country is not reported here, it is therefore estimated to have only a negligible level of trade in cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick (i.e. their market shares are close or equal to zero percent). 'Cold-rolled Stainless Steel Flat-rolled Products of At Least 600 Mm Wide and Between 3-4.75 Mm Thick' as a category is defined in this report following the definition given by the United Nations Statistics Division Classification Registry using the Standard International Trade Classification, Revision 3 (SITC, Rev. 3). The SITC code that defines 'cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick' is 67552.
Important Caveat: The figures should be seen as market estimates, as opposed to historical records, as these are forecasted for the current year of trade. More importantly, in light of the fact that unforeseeable factors might interrupt markets in achieving their reported levels, the figures should be seen as estimates of potential. For example, 'mad cow' disease, foot-and-mouth disease, trade embargoes, labor disputes, military conflicts, acts of terrorism, and other events will certainly affect the actual trade flows recorded for a variety of industry or product categories. In such cases, the difference between the numbers given in this report and the numbers actually observed might be interpreted as the 'net loss' or 'net gain' due to these exogenous events affecting regular trade flows that would have occurred had these events not have taken place.
Related Reports: This report was created for the market for cold-rolled stainless steel flat-rolled products of at least 600 mm wide and between 3-4.75 mm thick. Closely related reports published by ICON Group include the following:
- The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products: A 2021 Global Trade Perspective
- The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products Less Than 600 mm Wide: A 2021 Global Trade Perspective
- The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective
- The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 0.5-1 mm Thick: A 2021 Global Trade Perspective
- The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 1-3 mm Thick: A 2021 Global Trade Perspective
- The World Market for Cold-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 0.5 mm Thick: A 2021 Global Trade Perspective
- The World Market for High-Speed Steel Flat-Rolled Products: A 2021 Global Trade Perspective
- The World Market for High-Speed Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective
- The World Market for High-Speed Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Product: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and 4.75 mm Thick in Coils: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and between 3-4.75 mm Thick in Coils: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick in Coils: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and At Least 4.75 mm Thick: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled Stainless Steel Flat-Rolled Products of Less Than 600 mm Wide and Less Than 4.75 mm Thick: A 2021 Global Trade Perspective
- The World Market for Hot-Rolled, Stainless Steel Flat-Rolled Products of At Least 600 mm Wide and Less Than 3 mm Thick: A 2021 Global Trade Perspective
- The World Market for Silicon-Electrical Steel Flat-Rolled Products: A 2021 Global Trade Perspective
- The World Market for Silicon-Electrical Steel Flat-Rolled Products of At Least 600 mm Wide: A 2021 Global Trade Perspective
- The World Market for Silicon-Electrical Steel Flat-Rolled Products of Less Than 600 mm Wide: A 2021 Global Trade Perspective
1 METHODOLOGY
1.1 OUR APPROACH
2 THE WORLD MARKET
2.1 EXPORTS
2.1.1 THE WORLD MARKET: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK EXPORT SUPPLIES IN 2021
2.2 IMPORTS
2.2.1 THE WORLD MARKET: IMPORTED COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3 EXPORTS
3.1 AFRICA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.1.1 EXECUTIVE SUMMARY
3.1.2 KENYA
3.1.3 SOUTH AFRICA
3.1.4 TUNISIA
3.2 ASIA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.2.1 EXECUTIVE SUMMARY
3.2.2 CHINA
3.2.3 HONG KONG
3.2.4 INDIA
3.2.5 INDONESIA
3.2.6 JAPAN
3.2.7 MALAYSIA
3.2.8 SINGAPORE
3.2.9 SOUTH KOREA
3.2.10 TAIWAN
3.2.11 THAILAND
3.2.12 VIETNAM
3.3 EUROPE: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.3.1 EXECUTIVE SUMMARY
3.3.2 AUSTRIA
3.3.3 BELGIUM
3.3.4 BULGARIA
3.3.5 CZECH REPUBLIC
3.3.6 DENMARK
3.3.7 ESTONIA
3.3.8 FINLAND
3.3.9 FRANCE
3.3.10 GERMANY
3.3.11 HUNGARY
3.3.12 IRELAND
3.3.13 ITALY
3.3.14 LATVIA
3.3.15 LITHUANIA
3.3.16 LUXEMBOURG
3.3.17 NORWAY
3.3.18 POLAND
3.3.19 PORTUGAL
3.3.20 RUSSIA
3.3.21 SLOVAKIA
3.3.22 SLOVENIA
3.3.23 SPAIN
3.3.24 SWEDEN
3.3.25 SWITZERLAND
3.3.26 THE NETHERLANDS
3.3.27 THE UNITED KINGDOM
3.4 LATIN AMERICA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.4.1 EXECUTIVE SUMMARY
3.4.2 BRAZIL
3.4.3 MEXICO
3.5 NORTH AMERICA & THE CARIBBEAN: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.5.1 EXECUTIVE SUMMARY
3.5.2 CANADA
3.5.3 THE UNITED STATES
3.6 OCEANIA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.6.1 EXECUTIVE SUMMARY
3.6.2 AUSTRALIA
3.7 THE MIDDLE EAST: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.7.1 EXECUTIVE SUMMARY
3.7.2 PAKISTAN
3.7.3 THE UNITED ARAB EMIRATES
3.7.4 TURKEY
4 IMPORTS
4.1 AFRICA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.1.1 EXECUTIVE SUMMARY
4.1.2 ALGERIA
4.1.3 COTE D'IVOIRE
4.1.4 EGYPT
4.1.5 MOROCCO
4.1.6 NIGER
4.1.7 NIGERIA
4.1.8 RWANDA
4.1.9 SENEGAL
4.1.10 SOUTH AFRICA
4.1.11 ZIMBABWE
4.2 ASIA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.2.1 EXECUTIVE SUMMARY
4.2.2 CHINA
4.2.3 HONG KONG
4.2.4 INDIA
4.2.5 INDONESIA
4.2.6 JAPAN
4.2.7 MALAYSIA
4.2.8 PHILIPPINES
4.2.9 SINGAPORE
4.2.10 SOUTH KOREA
4.2.11 SRI LANKA
4.2.12 TAIWAN
4.2.13 THAILAND
4.2.14 VIETNAM
4.3 EUROPE: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.3.1 EXECUTIVE SUMMARY
4.3.2 AUSTRIA
4.3.3 BELARUS
4.3.4 BELGIUM
4.3.5 BOSNIA AND HERZEGOVINA
4.3.6 BULGARIA
4.3.7 CROATIA
4.3.8 CYPRUS
4.3.9 CZECH REPUBLIC
4.3.10 DENMARK
4.3.11 ESTONIA
4.3.12 FINLAND
4.3.13 FRANCE
4.3.14 GEORGIA
4.3.15 GERMANY
4.3.16 GREECE
4.3.17 HUNGARY
4.3.18 ICELAND
4.3.19 IRELAND
4.3.20 ITALY
4.3.21 KAZAKHSTAN
4.3.22 LATVIA
4.3.23 LITHUANIA
4.3.24 LUXEMBOURG
4.3.25 MACEDONIA
4.3.26 MALTA
4.3.27 MOLDOVA
4.3.28 NORWAY
4.3.29 POLAND
4.3.30 PORTUGAL
4.3.31 ROMANIA
4.3.32 RUSSIA
4.3.33 SLOVAKIA
4.3.34 SLOVENIA
4.3.35 SPAIN
4.3.36 SWEDEN
4.3.37 SWITZERLAND
4.3.38 THE NETHERLANDS
4.3.39 THE UNITED KINGDOM
4.3.40 UKRAINE
4.4 LATIN AMERICA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.4.1 EXECUTIVE SUMMARY
4.4.2 ARGENTINA
4.4.3 BOLIVIA
4.4.4 BRAZIL
4.4.5 CHILE
4.4.6 COLOMBIA
4.4.7 ECUADOR
4.4.8 EL SALVADOR
4.4.9 GUATEMALA
4.4.10 HONDURAS
4.4.11 MEXICO
4.4.12 PARAGUAY
4.4.13 PERU
4.4.14 URUGUAY
4.5 NORTH AMERICA & THE CARIBBEAN: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.5.1 EXECUTIVE SUMMARY
4.5.2 CANADA
4.5.3 DOMINICAN REPUBLIC
4.5.4 THE UNITED STATES
4.6 OCEANIA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.6.1 EXECUTIVE SUMMARY
4.6.2 AUSTRALIA
4.6.3 NEW CALEDONIA
4.6.4 NEW ZEALAND
4.7 THE MIDDLE EAST: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.7.1 EXECUTIVE SUMMARY
4.7.2 AZERBAIJAN
4.7.3 BAHRAIN
4.7.4 ISRAEL
4.7.5 JORDAN
4.7.6 KUWAIT
4.7.7 LEBANON
4.7.8 OMAN
4.7.9 PAKISTAN
4.7.10 QATAR
4.7.11 TURKEY
5 DISCLAIMERS, WARRANTIES, AND USER AGREEMENT PROVISIONS
5.1 DISCLAIMERS & SAFE HARBOR
5.2 ICON GROUP INTERNATIONAL, INC. USER AGREEMENT PROVISIONS
1.1 OUR APPROACH
2 THE WORLD MARKET
2.1 EXPORTS
2.1.1 THE WORLD MARKET: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK EXPORT SUPPLIES IN 2021
2.2 IMPORTS
2.2.1 THE WORLD MARKET: IMPORTED COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3 EXPORTS
3.1 AFRICA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.1.1 EXECUTIVE SUMMARY
3.1.2 KENYA
3.1.3 SOUTH AFRICA
3.1.4 TUNISIA
3.2 ASIA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.2.1 EXECUTIVE SUMMARY
3.2.2 CHINA
3.2.3 HONG KONG
3.2.4 INDIA
3.2.5 INDONESIA
3.2.6 JAPAN
3.2.7 MALAYSIA
3.2.8 SINGAPORE
3.2.9 SOUTH KOREA
3.2.10 TAIWAN
3.2.11 THAILAND
3.2.12 VIETNAM
3.3 EUROPE: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.3.1 EXECUTIVE SUMMARY
3.3.2 AUSTRIA
3.3.3 BELGIUM
3.3.4 BULGARIA
3.3.5 CZECH REPUBLIC
3.3.6 DENMARK
3.3.7 ESTONIA
3.3.8 FINLAND
3.3.9 FRANCE
3.3.10 GERMANY
3.3.11 HUNGARY
3.3.12 IRELAND
3.3.13 ITALY
3.3.14 LATVIA
3.3.15 LITHUANIA
3.3.16 LUXEMBOURG
3.3.17 NORWAY
3.3.18 POLAND
3.3.19 PORTUGAL
3.3.20 RUSSIA
3.3.21 SLOVAKIA
3.3.22 SLOVENIA
3.3.23 SPAIN
3.3.24 SWEDEN
3.3.25 SWITZERLAND
3.3.26 THE NETHERLANDS
3.3.27 THE UNITED KINGDOM
3.4 LATIN AMERICA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.4.1 EXECUTIVE SUMMARY
3.4.2 BRAZIL
3.4.3 MEXICO
3.5 NORTH AMERICA & THE CARIBBEAN: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.5.1 EXECUTIVE SUMMARY
3.5.2 CANADA
3.5.3 THE UNITED STATES
3.6 OCEANIA: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.6.1 EXECUTIVE SUMMARY
3.6.2 AUSTRALIA
3.7 THE MIDDLE EAST: EXPORT SUPPLIES OF COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IN 2021
3.7.1 EXECUTIVE SUMMARY
3.7.2 PAKISTAN
3.7.3 THE UNITED ARAB EMIRATES
3.7.4 TURKEY
4 IMPORTS
4.1 AFRICA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.1.1 EXECUTIVE SUMMARY
4.1.2 ALGERIA
4.1.3 COTE D'IVOIRE
4.1.4 EGYPT
4.1.5 MOROCCO
4.1.6 NIGER
4.1.7 NIGERIA
4.1.8 RWANDA
4.1.9 SENEGAL
4.1.10 SOUTH AFRICA
4.1.11 ZIMBABWE
4.2 ASIA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.2.1 EXECUTIVE SUMMARY
4.2.2 CHINA
4.2.3 HONG KONG
4.2.4 INDIA
4.2.5 INDONESIA
4.2.6 JAPAN
4.2.7 MALAYSIA
4.2.8 PHILIPPINES
4.2.9 SINGAPORE
4.2.10 SOUTH KOREA
4.2.11 SRI LANKA
4.2.12 TAIWAN
4.2.13 THAILAND
4.2.14 VIETNAM
4.3 EUROPE: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.3.1 EXECUTIVE SUMMARY
4.3.2 AUSTRIA
4.3.3 BELARUS
4.3.4 BELGIUM
4.3.5 BOSNIA AND HERZEGOVINA
4.3.6 BULGARIA
4.3.7 CROATIA
4.3.8 CYPRUS
4.3.9 CZECH REPUBLIC
4.3.10 DENMARK
4.3.11 ESTONIA
4.3.12 FINLAND
4.3.13 FRANCE
4.3.14 GEORGIA
4.3.15 GERMANY
4.3.16 GREECE
4.3.17 HUNGARY
4.3.18 ICELAND
4.3.19 IRELAND
4.3.20 ITALY
4.3.21 KAZAKHSTAN
4.3.22 LATVIA
4.3.23 LITHUANIA
4.3.24 LUXEMBOURG
4.3.25 MACEDONIA
4.3.26 MALTA
4.3.27 MOLDOVA
4.3.28 NORWAY
4.3.29 POLAND
4.3.30 PORTUGAL
4.3.31 ROMANIA
4.3.32 RUSSIA
4.3.33 SLOVAKIA
4.3.34 SLOVENIA
4.3.35 SPAIN
4.3.36 SWEDEN
4.3.37 SWITZERLAND
4.3.38 THE NETHERLANDS
4.3.39 THE UNITED KINGDOM
4.3.40 UKRAINE
4.4 LATIN AMERICA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.4.1 EXECUTIVE SUMMARY
4.4.2 ARGENTINA
4.4.3 BOLIVIA
4.4.4 BRAZIL
4.4.5 CHILE
4.4.6 COLOMBIA
4.4.7 ECUADOR
4.4.8 EL SALVADOR
4.4.9 GUATEMALA
4.4.10 HONDURAS
4.4.11 MEXICO
4.4.12 PARAGUAY
4.4.13 PERU
4.4.14 URUGUAY
4.5 NORTH AMERICA & THE CARIBBEAN: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.5.1 EXECUTIVE SUMMARY
4.5.2 CANADA
4.5.3 DOMINICAN REPUBLIC
4.5.4 THE UNITED STATES
4.6 OCEANIA: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.6.1 EXECUTIVE SUMMARY
4.6.2 AUSTRALIA
4.6.3 NEW CALEDONIA
4.6.4 NEW ZEALAND
4.7 THE MIDDLE EAST: COLD-ROLLED STAINLESS STEEL FLAT-ROLLED PRODUCTS OF AT LEAST 600 MM WIDE AND BETWEEN 3-4.75 MM THICK IMPORTS IN 2021
4.7.1 EXECUTIVE SUMMARY
4.7.2 AZERBAIJAN
4.7.3 BAHRAIN
4.7.4 ISRAEL
4.7.5 JORDAN
4.7.6 KUWAIT
4.7.7 LEBANON
4.7.8 OMAN
4.7.9 PAKISTAN
4.7.10 QATAR
4.7.11 TURKEY
5 DISCLAIMERS, WARRANTIES, AND USER AGREEMENT PROVISIONS
5.1 DISCLAIMERS & SAFE HARBOR
5.2 ICON GROUP INTERNATIONAL, INC. USER AGREEMENT PROVISIONS
