High Speed Steel - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2024 - 2029)
The High Speed Steel Market size is estimated at USD 3.13 billion in 2024, and is expected to reach USD 3.14 billion by 2029, growing at a CAGR of greater than 4% during the forecast period (2024-2029).
The COVID-19 pandemic significantly impacted the global high-speed steel (HSS) market, causing disruptions in supply chains and reducing demand. However, since 2021, the market has been gradually recovering as economies reopened and industrial activities resumed. There is a renewed focus on supply chain resilience. As industries like automotive and aerospace regain momentum, the demand for HSS is expected to increase, driving further recovery in the market.
Key Highlights
The major factors driving the market’s growth are the growing number of industrial uses and the increasing demand from the aerospace industry.
The growing use of carbide-based cutting tools in different end-use sectors is likely to slow the market's growth.
In the coming years, the high-speed steel market is expected to grow due to the rapid changes in technology.
Asia-Pacific is expected to dominate the high-speed steel market over the forecast period.
High Speed Steel Market Trends
The Automotive Industry is Expected to Dominate the Market
High-speed steel is used in many ways in the automotive industry to make vehicles lighter, stiffer, and better at absorbing energy in some places.
High-speed steel has various properties that enhance its demand in the automotive industry, such as mechanical properties and ranges, thickness and width capabilities, hot- and cold-rolled availability, coating specifications, and chemical composition specifications.
In the automotive industry, steel's strength is usually determined by its microstructure, which varies based on its chemical makeup, its history with heat, and the deformation processes it goes through during its production schedule.
High-speed steel has a lot of advantages over regular steel, especially in the automotive industry, where weight is a significant factor in how well fuel is used. The mechanical properties, such as weldability, fatigue, static strength, cathodic protection, and resistance to hydrogen embrittlement, are useful to the auto industry.
High-speed steel is used in structural applications such as camshaft and crankshaft sprockets, connecting rods, synchronizer rings, bearing caps, oil pump gears, etc. The stainless steel used in these applications includes engine valve seats. Ferrous-based alloys, such as Fe-Cr-Mn-Si materials, are used in shock absorber parts, filters for hydraulic systems, manifold flanges, exhaust converter outlet flanges, and exhaust gas recirculation systems.
The automotive industry has been witnessing an upsurge in demand for both conventional and electric vehicles post-pandemic, primarily due to the increased traveling activities of people across the globe.
According to the International Organization of Motor Vehicle Manufacturers (OICA), in 2022, around 85.01 million vehicles were produced worldwide, showcasing a growth rate of 5.99% compared to 80.20 million vehicles in 2021.
In North America, according to the OICA, automotive production in 2022 accounted for 14,798,146 units, an increase of 9.88% compared to the show in 2021, which was reportedly 13,467,065 units. Additionally, in North America, the sales of electric vehicles in 2022 accounted for 1,108 thousand units, compared to 748 thousand unit sales in 2021.
In Europe, Germany is among the key manufacturers of vehicles. The automobile manufacturing industry in Germany is a prominent shareholder of the overall automotive production in the European region. The country hosts major car-making brands, including Volkswagen, Mercedes-Benz, Audi, BMW, Porsche, etc.
According to the Organization Internationale des Constructeurs d’Automobiles (OICA), in 2022, the country produced 3,677,820 vehicles, which increased by 11% compared to 3,308,692 cars in 2021.
Overall, the increasing usage of high-speed steel for better fuel efficiency and lighter vehicles will boost the growth of the automotive industry.
Asia-Pacific is Expected to Dominate the Market
During the next few years, the Asia-Pacific region is expected to be the largest market for high-speed steel. In countries like China and India, the growth of industries like automotive, aerospace, and others has caused the demand for high-speed steel to surge.
The production and sales in the Asia-Pacific region are primarily dominated by countries like China, India, and Japan, which consist of large automotive manufacturers and a vast number of production bases within the countries.
According to the China Association of Automobile Manufacturers (CAAM), China had the most significant automotive production base globally, with a total vehicle production of 27 million units in 2022, an increase of 3.4% compared to 2021.
In China, the main focus is to increase production and sales of electric vehicles. The country has set a target to produce 7 million electric vehicles per year by 2025. By 2025, the goal is to have electric vehicles comprise 20% of total new vehicle production in China.
India has become the second-largest automotive vehicle manufacturer in the region. According to the Society of Indian Automobile Manufacturers (SIAM), in FY 2022-23, the total number of automobile manufacturers in the country grew by about 12.55% compared to FY 2021-2022, recording 25,931,867 units.
According to the Japan Automobile Manufacturers Association (JAMA), motor vehicle production in the country in 2023 grew by 14.84%, recording 8,998,538 units.
During the forecast period, these changes are likely to increase the need for high-speed steel.
High Speed Steel Industry Overview
The high-speed steel market is partially consolidated in nature. Some of the major players in the market include Sandvik AB, voestalpine BЦHLER Edelstahl GmbH & Co. KG, NIPPON KOSHUHA STEEL CO. LTD, PROTERIAL Ltd, and ArcelorMittal.
Additional Benefits:
The market estimate (ME) sheet in Excel format
3 months of analyst support
The COVID-19 pandemic significantly impacted the global high-speed steel (HSS) market, causing disruptions in supply chains and reducing demand. However, since 2021, the market has been gradually recovering as economies reopened and industrial activities resumed. There is a renewed focus on supply chain resilience. As industries like automotive and aerospace regain momentum, the demand for HSS is expected to increase, driving further recovery in the market.
Key Highlights
The major factors driving the market’s growth are the growing number of industrial uses and the increasing demand from the aerospace industry.
The growing use of carbide-based cutting tools in different end-use sectors is likely to slow the market's growth.
In the coming years, the high-speed steel market is expected to grow due to the rapid changes in technology.
Asia-Pacific is expected to dominate the high-speed steel market over the forecast period.
High Speed Steel Market Trends
The Automotive Industry is Expected to Dominate the Market
High-speed steel is used in many ways in the automotive industry to make vehicles lighter, stiffer, and better at absorbing energy in some places.
High-speed steel has various properties that enhance its demand in the automotive industry, such as mechanical properties and ranges, thickness and width capabilities, hot- and cold-rolled availability, coating specifications, and chemical composition specifications.
In the automotive industry, steel's strength is usually determined by its microstructure, which varies based on its chemical makeup, its history with heat, and the deformation processes it goes through during its production schedule.
High-speed steel has a lot of advantages over regular steel, especially in the automotive industry, where weight is a significant factor in how well fuel is used. The mechanical properties, such as weldability, fatigue, static strength, cathodic protection, and resistance to hydrogen embrittlement, are useful to the auto industry.
High-speed steel is used in structural applications such as camshaft and crankshaft sprockets, connecting rods, synchronizer rings, bearing caps, oil pump gears, etc. The stainless steel used in these applications includes engine valve seats. Ferrous-based alloys, such as Fe-Cr-Mn-Si materials, are used in shock absorber parts, filters for hydraulic systems, manifold flanges, exhaust converter outlet flanges, and exhaust gas recirculation systems.
The automotive industry has been witnessing an upsurge in demand for both conventional and electric vehicles post-pandemic, primarily due to the increased traveling activities of people across the globe.
According to the International Organization of Motor Vehicle Manufacturers (OICA), in 2022, around 85.01 million vehicles were produced worldwide, showcasing a growth rate of 5.99% compared to 80.20 million vehicles in 2021.
In North America, according to the OICA, automotive production in 2022 accounted for 14,798,146 units, an increase of 9.88% compared to the show in 2021, which was reportedly 13,467,065 units. Additionally, in North America, the sales of electric vehicles in 2022 accounted for 1,108 thousand units, compared to 748 thousand unit sales in 2021.
In Europe, Germany is among the key manufacturers of vehicles. The automobile manufacturing industry in Germany is a prominent shareholder of the overall automotive production in the European region. The country hosts major car-making brands, including Volkswagen, Mercedes-Benz, Audi, BMW, Porsche, etc.
According to the Organization Internationale des Constructeurs d’Automobiles (OICA), in 2022, the country produced 3,677,820 vehicles, which increased by 11% compared to 3,308,692 cars in 2021.
Overall, the increasing usage of high-speed steel for better fuel efficiency and lighter vehicles will boost the growth of the automotive industry.
Asia-Pacific is Expected to Dominate the Market
During the next few years, the Asia-Pacific region is expected to be the largest market for high-speed steel. In countries like China and India, the growth of industries like automotive, aerospace, and others has caused the demand for high-speed steel to surge.
The production and sales in the Asia-Pacific region are primarily dominated by countries like China, India, and Japan, which consist of large automotive manufacturers and a vast number of production bases within the countries.
According to the China Association of Automobile Manufacturers (CAAM), China had the most significant automotive production base globally, with a total vehicle production of 27 million units in 2022, an increase of 3.4% compared to 2021.
In China, the main focus is to increase production and sales of electric vehicles. The country has set a target to produce 7 million electric vehicles per year by 2025. By 2025, the goal is to have electric vehicles comprise 20% of total new vehicle production in China.
India has become the second-largest automotive vehicle manufacturer in the region. According to the Society of Indian Automobile Manufacturers (SIAM), in FY 2022-23, the total number of automobile manufacturers in the country grew by about 12.55% compared to FY 2021-2022, recording 25,931,867 units.
According to the Japan Automobile Manufacturers Association (JAMA), motor vehicle production in the country in 2023 grew by 14.84%, recording 8,998,538 units.
During the forecast period, these changes are likely to increase the need for high-speed steel.
High Speed Steel Industry Overview
The high-speed steel market is partially consolidated in nature. Some of the major players in the market include Sandvik AB, voestalpine BЦHLER Edelstahl GmbH & Co. KG, NIPPON KOSHUHA STEEL CO. LTD, PROTERIAL Ltd, and ArcelorMittal.
Additional Benefits:
The market estimate (ME) sheet in Excel format
3 months of analyst support
1 INTRODUCTION
1.1 Study Assumptions
1.2 Scope of the Study
2 RESEARCH METHODOLOGY
3 EXECUTIVE SUMMARY
4 MARKET DYNAMICS
4.1 Drivers
4.1.1 Growing Usage in Different Industrial Applications
4.1.2 Increasing Demand from Aerospace industry
4.1.3 Other Drivers
4.2 Restraints
4.2.1 The Rising Use of Carbide-based Cutting Tools Across Various End-use Sectors
4.2.2 Other Restraints
4.3 Industry Value-Chain Analysis
4.4 Porter's Five Forces Analysis
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Consumers
4.4.3 Threat of New Entrants
4.4.4 Threat of Substitute Products and Services
4.4.5 Degree of Competition
5 MARKET SEGMENTATION (MARKET SIZE IN VALUE)
5.1 Type
5.1.1 Tungsten High Speed Steel
5.1.2 Molybdenum High Speed Steel
5.1.3 Other Types (Cobalt High-Speed Steel, Chromium High-Speed Steel, and Vanadium High-Speed Steel)
5.2 Product Type
5.2.1 Metal Cutting Tools
5.2.2 Cold Working Tools
5.2.3 Other Product Types (Milling Tools, Drilling Tools, etc.)
5.3 End-user Industry
5.3.1 Automotive
5.3.2 Aerospace
5.3.3 Plastics
5.3.4 Other End-user Industries (Mining, Manufacturing, Tool Making, etc)
5.4 Geography
5.4.1 Asia-Pacific
5.4.1.1 China
5.4.1.2 India
5.4.1.3 Japan
5.4.1.4 South Korea
5.4.1.5 Malaysia
5.4.1.6 Thailand
5.4.1.7 Indonesia
5.4.1.8 Vietnam
5.4.1.9 Rest of Asia-Pacific
5.4.2 North America
5.4.2.1 United States
5.4.2.2 Canada
5.4.2.3 Mexico
5.4.3 Europe
5.4.3.1 Germany
5.4.3.2 United Kingdom
5.4.3.3 Italy
5.4.3.4 France
5.4.3.5 Spain
5.4.3.6 NORDIC
5.4.3.7 Turkey
5.4.3.8 Russia
5.4.3.9 Rest of Europe
5.4.4 South America
5.4.4.1 Brazil
5.4.4.2 Argentina
5.4.4.3 Colombia
5.4.4.4 Rest of South America
5.4.5 Middle East and Africa
5.4.5.1 Saudi Arabia
5.4.5.2 South Africa
5.4.5.3 Nigeria
5.4.5.4 Qatar
5.4.5.5 Egypt
5.4.5.6 United Arab Emirates
5.4.5.7 Rest of Middle East and Africa
6 COMPETITIVE LANDSCAPE
6.1 Mergers & Acquisitions, Joint Ventures, Collaborations, and Agreements
6.2 Market Share (%) Analysis **/Ranking Analysis
6.3 Strategies Adopted by Leading Players
6.4 Company Profiles
6.4.1 ArcelorMittal
6.4.2 CRS Holdings LLC
6.4.3 ERASTEEL
6.4.4 Friedr. Lohmann GmbH
6.4.5 NACHI-FUJIKOSHI CORP.
6.4.6 NIPPON KOSHUHA STEEL CO. LTD
6.4.7 PROTERIAL Ltd
6.4.8 Sandvik AB
6.4.9 thyssenkrupp AG
6.4.10 VILLARES METALS SA
6.4.11 voestalpine BOHLER Edelstahl GmbH & Co. KG
7 MARKET OPPORTUNITIES AND FUTURE TRENDS
7.1 Rapid Technological Improvement
7.2 Other Opportunities
1.1 Study Assumptions
1.2 Scope of the Study
2 RESEARCH METHODOLOGY
3 EXECUTIVE SUMMARY
4 MARKET DYNAMICS
4.1 Drivers
4.1.1 Growing Usage in Different Industrial Applications
4.1.2 Increasing Demand from Aerospace industry
4.1.3 Other Drivers
4.2 Restraints
4.2.1 The Rising Use of Carbide-based Cutting Tools Across Various End-use Sectors
4.2.2 Other Restraints
4.3 Industry Value-Chain Analysis
4.4 Porter's Five Forces Analysis
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Consumers
4.4.3 Threat of New Entrants
4.4.4 Threat of Substitute Products and Services
4.4.5 Degree of Competition
5 MARKET SEGMENTATION (MARKET SIZE IN VALUE)
5.1 Type
5.1.1 Tungsten High Speed Steel
5.1.2 Molybdenum High Speed Steel
5.1.3 Other Types (Cobalt High-Speed Steel, Chromium High-Speed Steel, and Vanadium High-Speed Steel)
5.2 Product Type
5.2.1 Metal Cutting Tools
5.2.2 Cold Working Tools
5.2.3 Other Product Types (Milling Tools, Drilling Tools, etc.)
5.3 End-user Industry
5.3.1 Automotive
5.3.2 Aerospace
5.3.3 Plastics
5.3.4 Other End-user Industries (Mining, Manufacturing, Tool Making, etc)
5.4 Geography
5.4.1 Asia-Pacific
5.4.1.1 China
5.4.1.2 India
5.4.1.3 Japan
5.4.1.4 South Korea
5.4.1.5 Malaysia
5.4.1.6 Thailand
5.4.1.7 Indonesia
5.4.1.8 Vietnam
5.4.1.9 Rest of Asia-Pacific
5.4.2 North America
5.4.2.1 United States
5.4.2.2 Canada
5.4.2.3 Mexico
5.4.3 Europe
5.4.3.1 Germany
5.4.3.2 United Kingdom
5.4.3.3 Italy
5.4.3.4 France
5.4.3.5 Spain
5.4.3.6 NORDIC
5.4.3.7 Turkey
5.4.3.8 Russia
5.4.3.9 Rest of Europe
5.4.4 South America
5.4.4.1 Brazil
5.4.4.2 Argentina
5.4.4.3 Colombia
5.4.4.4 Rest of South America
5.4.5 Middle East and Africa
5.4.5.1 Saudi Arabia
5.4.5.2 South Africa
5.4.5.3 Nigeria
5.4.5.4 Qatar
5.4.5.5 Egypt
5.4.5.6 United Arab Emirates
5.4.5.7 Rest of Middle East and Africa
6 COMPETITIVE LANDSCAPE
6.1 Mergers & Acquisitions, Joint Ventures, Collaborations, and Agreements
6.2 Market Share (%) Analysis **/Ranking Analysis
6.3 Strategies Adopted by Leading Players
6.4 Company Profiles
6.4.1 ArcelorMittal
6.4.2 CRS Holdings LLC
6.4.3 ERASTEEL
6.4.4 Friedr. Lohmann GmbH
6.4.5 NACHI-FUJIKOSHI CORP.
6.4.6 NIPPON KOSHUHA STEEL CO. LTD
6.4.7 PROTERIAL Ltd
6.4.8 Sandvik AB
6.4.9 thyssenkrupp AG
6.4.10 VILLARES METALS SA
6.4.11 voestalpine BOHLER Edelstahl GmbH & Co. KG
7 MARKET OPPORTUNITIES AND FUTURE TRENDS
7.1 Rapid Technological Improvement
7.2 Other Opportunities
