Personal mobility aids (PMAs) refer to devices that are meant to provide mobility to people who are less mobile, such as motorised wheelchairs for the elderly or physically disabled.In the coming year...
Pervious Pavement is a specific type of pavement with a high porosity that allows rainwater to pass through it into the ground below. Pervious pavement is made of either pervious asphalt or pervious c...
The increasing demand for extruded pet food has fueled the demand for pet food extrusion equipment as these equipment enhance the quality of pet food along with the shaping and sizing benefits, which...
According to Our PET Supplies Research Center, the global pet industry reached $ 261 billion in 2022, a year-on-year increase of 11.3%. The United States gains the highest pet penetration rate and bec...
Many new trends have emerged in the market such as the availability of hot-filling products in PET bottles and aseptic cold-filling PET bottles, which increase the shelf life of the products even if t...
The 2025 U.S. tariff policies introduce profound uncertainty into the global economic landscape. This report critically examines the implications of recent tariff adjustments and international strateg...
Petrochemicals (also known as petroleum distillates) are chemical products derived from petroleum. Some chemical compounds made from petroleum are also obtained from other fossil fuels, such as coal o...
Petroleum asphalt is a sticky, black and highly viscous liquid or semi-solid that is present in most petroleum crude oils and in some natural deposits. Petroleum crude oil is a complex mixture of a gr...
Filtration is a method used to separate or collect a desired solid from a solution or to remove solid impurities from a liquid. Pharmaceutical filtration refers to the process of eliminating unwanted...
Phenol formaldehyde resins (PF) or phenolic resins are synthetic polymers obtained by the reaction of phenol or substituted phenol with formaldehyde. Phenolic resin, a synthetic plastic, colorless or...
Photonic crystals are materials with periodic structures that manipulate the flow of light. They are used in optical communications, sensors, and lasers.Photonic crystals enable advanced optical devic...
Photonics is one of the fastest growing high-tech industries in the world today. It includes optical communications (e.g., fiber optics, lasers, and infrared links), optical imaging (e.g., spy and wea...
Photovoltaic materials are used in solar cell technology to convert sunlight into electricity. They include various types of solar cell materials.The photovoltaic materials market is driven by the gro...
Phthalic anhydride is a toxic, white solid crystalline compound in various forms or a clear molten liquid, with an irritating odor. It is slightly soluble in hot water, hydrolysing to phthalic acid. P...
The piezoelectric ceramic is a kind of functional ceramic materials which can create electricity when subjected to a mechanical stress. They will also work in reverse, generating a strain by the appli...
Among the various challenges of paint formulation, issues related to colorant compatibility and color development are certainly some of the most common and difficult to solve.The global market will gr...
Pin and Sleeve Devices includ plugs, receptacles, connectors, inlets and other accessories.Pin and Sleeve Plugs are male cord end connectors. Pin and Sleeve Connectors are female cord end connectors....
Pipe coatings are applied to protect the pipelines from corrosion, increase its shelf-life, maintain its flow, and to ensure the clean product delivery. There are four major types of pipe coatings, na...
Pipe joint is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, j...
Plasterboard is the generic name for a family of panel products that consist of a noncombustible core, composed primarily of gypsum, and a paper surfacing on the face, back and long edges. Plasterboar...
There are two type of plastic cards include smart cards and regular cards. Smart cards are the most common form of IT processing power on the planet. Similar in size to today's plastic payment card, t...
Plastic containers are containers made exclusively or partially of plastic. Plastic containers are ubiquitous either as single-use or reuseable/durable plastic cups, plastic bottles, plastic bags, foa...
Plastic crates are used for storage of various goods and for shipping from one location to another. The goods are positioned in a crate, with or without cover, and set or stacked onto a pallet loaded...
Plastic Food Containers are container that holds food. Many products use low-density polyethylene formed into plastic bags, plastic boxes, Cans and Jars, plastic cans or plastic jars.The global plasti...
Pipes and tubes are made from materials ranging from inorganic clays and concrete to iron and steel, and to commodity and specialty polymers.Improvements in technology and plastic resins have helped p...
Definition and Overview of Plastic Recycling: Plastic recycling is the process of recovering and reprocessing plastic waste from post-consumer or post-industrial sources, transforming it into reusable...
Plastic film is a thin continuous polymeric material. Thicker plastic material is often called a “sheet”. These thin plastic membranes are used to separate areas or volumes, to hold items, to act as b...
Plastic waste management is a collective term for various approaches and strategies used to recycle plastic materials that would otherwise be dumped into landfills, or bodies of water, or otherwise co...
Plumbing fittings are crucial components of plumbing systems installed in buildings for efficient distribution of water within the building for drinking, washing, heating and for removing waterborne w...
Pneumatic tools are powered by compressed air and include drills, hammers, sanders, polisher, etc. Pneumatic tools are widely applied in automotive industry, manufacturing industry and various constru...
Polybutadiene is a synthetic rubber. Polybutadiene rubber is a polymer formed from the polymerization of the monomer 1,3-butadiene. Polybutadiene has a high resistance to wear and is used especially i...
Polycarbonate plastic is a transparent amorphous thermoplastic. It contains carbonate groups in its chemical structure.The strong demand from the automotive industry as one of the primary growth facto...
Polyether polyols' major use is in polyurethane foams. Flexible foams are primarily used in cushioning applications such as furniture, and Clothes and Shoes, and in Automobile underlay.Leading compani...
Polyethylene (abbreviated PE) or polyethene (IUPAC name polyethene or poly(methylene)) is the most common plastic. Polyethylene is derived from either modifying natural gas (a methane, ethane, propane...
Polyfilm is a thin continuous polymeric material. Thicker plastic material is often called a 'sheet'. These thin plastic membranes are used to separate areas or volumes, to hold items, to act as barri...
Polymer Emulsions are monomers dissolved in water. They are also known as waterborne solvent because of their high water content. They are one of the fastest growing categories of specialty chemicals...
A polymer gel is a soft and wet material capable of undergoing large deformation. A deformed gel, in turn, changes its chemical potential, behaving as an energy transducer. Thus, a polymer gel shows a...
Polymer Modified Bitumen (PMB) refers to a type of asphalt in which polymer additives, such as Styrene-Butadiene-Styrene (SBS), are blended with traditional bitumen to enhance its performance characte...
Polymer resin is a clear liquid plastic product that hardens to create a thick, durable, glossy coating. Once hardened, it is fade-proof and water-resistant. This type of resin is commonly used on fur...
Polypropylene (PP) is a versatile thermoplastic material, compatible with many processing techniques and used in many commercial applications.Global Polypropylene key players include Berry Global, Mog...
Polypropylene nonwoven fabrics are fabrics manufactured by aligning various webs in multiple patterns with polypropylene as a main raw material.The demand for polypropylene nonwoven fabric is increasi...
Polypropylene pipe is mainly made of PP resin. Polypropylene (PP) is the lightest weight piping material with very good chemical resistance, even to many organic solvents. PP-R/RCT Pipe is made of Pol...
Polysilicon is a hyper pure form of silicon. It is multi-crystalline, high purity silicon, greater than 99.999% pure, used as the starting material for the growth of high purity single crystal silicon...
A polyurethane coating is a layer of polyurethane (a type of polymer) that is applied to a material's surface in order to protect it. A polyurethane coating can protect the base material from corrosio...
This report studies the POP Display market, from angles of players, regions, product types and end industries, to analyze the status and the future. A point-of-purchase or POP display is marketing mat...
Filters
Search
Categories
Publishers
Regions
Price
Date
Pages
Offers
