APO Research: Market Research Reports

A picosecond laser is a laser which emits optical pulses with a duration between 1 ps and (usually) some tens of picoseconds. It thus also belongs to the category of ultrafast lasers or ultrashort pul...

Piezoelectric proportional valves are valves that operate based on piezoelectric effects that generate electrical charge through mechanical stress, vibration, or heat. When a stress is applied, it gen...

Pigment inks are fixed by creating adhesion of the pigment with the fabric. Pigment inks contain binder which typically is polymer-based compound. During the fixation process this polymer is heated to...

The Pipe Hangers & Supports market covers Pipe Hangers, Pipe Supports, etc. The typical players include Hill & Smith Holdings, Eaton (B-Line),Anvil International, Globe Pipe Hanger Products, LISEGA SE...

Pipe jacking technology is a trenchless tunneling pipeline laying technology used in municipal construction. The advantage is that it does not affect the surrounding environment or the influence is sm...

Piperacillin Sodium (CAS 59703-84-3) is the sodium salt of piperacillin, a broad-spectrum semisynthetic, ampicillin-derived ureidopenicillin antibiotic with bactericidal activity. Highlights The globa...

A Plain Measuring Tool is a device to measure a physical quantity. The Plain Measuring Tools industry can be broken down into several segments, Tapes, Wood Folders Rulers and Chalk Reels. Across the U...

Plant fungicides are pesticides that kill or prevent the growth of fungi and their spores. They can be used to control fungi that damage plants, including rusts, mildews and blights. Highlights The gl...

Surface Cleaning Using Plasma in a Low Pressure Environment (vacuum) is an economical way to clean specimens uniformly and securely. Removal of contaminants from the studied substrates without affecti...

Plasma cutting torches usually use a copper nozzle to constrict the gas stream with the arc flowing through it. That arc jumps from an electrode in the torch to something else – usually the conductive...

PECVD is a deposition technology to deposit thin films using plasma technology. Highlights The global Plasma Enhanced Chemical Vapor Deposition (PEVCD) Systems market is projected to reach US$ million...

Plastic bait is a kind of artificial bait with plastic as the theme material, also known as lure bait, fake bait or artificial bait. Highlights The global Plastic Bait market is projected to reach US$...

Plastic bottle recycling refers to the process of recovering waste or scrap plastic bottle and reprocessing the materials into functional and useful products. The goal of recycling plastic bottle is t...

A cable tie (also known as a hose tie, zip tie, or by the brand name Ty-Rap) is a type of fastener, for holding items together, primarily electrical cables, and wires. Because of their low cost, ease...

A Corrugated Tube is a tube with a series of parallel ridges and grooves on its surface. Highlights The global Plastic Corrugated Tube market is projected to reach US$ million by 2028 from an estimate...

Plastic Drag Chains are a type of drag chain. Looks like a tank chain, composed of many unit chains, links between rotation freely. Plastic Drag Chains can be widely used in various industrial equipme...

Plastic film is a thin continuous polymeric material. Thicker plastic material is often called a “sheet”. These thin plastic membranes are used to separate areas or volumes, to hold items, to act as b...

Before recycling, most plastics are sorted according to their resin type. Most plastic reclaimers do not rely on the RIC now; they use various sorting systems to identify the resin, ranging from manua...

Plate Type Falling Film Evaporator (PTFFE) is efficiently developed for optimizing evaporation of sugar solutions with full accessibility of the heat transfer surfaces. Highlights The global Plate Fal...

A plate and frame heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. This has a major advantage over a conventional heat exchanger in that the fluid...

Internal fixation refers to fixation of screws and/or plates Plates are like internal splints that hold the broken pieces of bone together. They are attached to the bone with screws. Plates may be lef...

Platform screen doors, also known as platform edge doors. Platform Screen Doors (PSD) is a safety system used in subway and LRT (Light Rail Transit) to cut off platform from the railway. Fixed doors a...

Typically, dc power supplies provide a well-regulated current or voltage level that is pre-set and then the supply turned on and off as needed. This is the typical function of a power supply in an ele...

A crucible is a ceramic or metal container in which metals or other substances may be melted or subjected to extremely high temperatures. Highlights The global Platinum Crucible market is projected to...

PLC (Planar Lightwave Circuit) Splitter is integrated waveguide optical power budget device based on quartz substrate, featuring small size, wide operating wavelength range, high reliability, and good...

A pleated filter is an air filter that uses a folding pattern with its media (hence the name “pleated” filter). Highlights The global Pleated Filters market is projected to reach US$ million by 2028 f...

Atrial fibrillation is an important risk factor for stroke. Because of its preventability, the early detection and treatment of atrial fibrillation is of great significance to stroke. The implantable...

The PMN-PT Single Crystal market covers Type A, Type B, etc. The typical players include TRS Technologies, CTS, IBULE PHOTONICS, JFE Mineral, etc. The PMN-PT (lead magnesium niobate-lead titanate) cry...

A point machine (also known as a point motor, switch machine or switch motor) is a device for operating railway turnouts especially at a distance. Highlights The global Point Machine market is project...

Point-of-care testing (POCT or bedside testing) is defined as medical diagnostic testing at or near the point of care—that is, at the time and place of patient care. In our report, blood glucose test...

A point-of-use water cooler (sometimes also known as a bottleless water cooler) is a machine that dispenses hot and cold water, without the hassle of handling large plastic bottles. These coolers have...

Poloxamers are nonionic triblock copolymers composed of a central hydrophobic chain of polyoxypropylene (poly(propylene oxide)) flanked by two hydrophilic chains of polyoxyethylene (poly(ethylene oxid...

Poly-gamma-glutamic Acid (CAS 84960-48-5), is a water-soluble, biodegradable, non-toxic, biopolymer prepared by microbial fermentation, used in food, cosmetics, etc. Highlights The global Poly-Gamma-G...

Polycaprolactone diol (PCL-diol), along with polytetrahydrofuran diol (PTHF-diol) and ceric ammonium nitrate may be used to polymerize methyl methacrylate (MMA). The product may be used to prepare bio...

The Polycarbodiimides market covers Anti-hydrolysis Agents, Cross-Linking Agents, etc. The typical players include Angus Chemical Company, BASF, Stahl, Nisshinbo, DSM, LANXESS, Covestro, etc. Polycarb...

Polycarbonate panels are made from a highly durable material as polycarbonate is one of the strongest plastics around, meaning that they are ideal for glazing greenhouses, porch windows and conservato...

Polycarbonates (PC) are a group of thermoplastic polymers containing carbonate groups in their chemical structures. Polycarbonates used in engineering are strong, tough materials, and some grades are...

Polycrystalline Diamond Cutting Tool is short for PCD cutting tool. Polycrystalline Diamond (PCD) is a synthetic diamond product that is produced by sintering together selected diamond particles with...

Polyethylene wax is a low molecular weight polyethylene polymer that is used for improving and enhancing the process parameters and properties of the finished products in diverse applications in the p...

These compounds formed chemically by esterification of fatty acids, Polyglyceryl esters are important non-ionic surfactants with various applications in cosmetic, in food, pharmaceutical and other ind...

Highlights The global Polyimide and Imide Polymer market is projected to reach US$ million by 2028 from an estimated US$ million in 2022, at a CAGR of % during 2024 and 2029. Global Polyimide and Imid...

Polymer-dispersed liquid crystals (PDLCs) are a relatively new class of materials that hold promise for many applications ranging from switchable windows to projection displays. These materials, which...

Polymeric Flexible Tubing are made from elastomeric and non-elastomeric polymers that can be natural or synthetic. The focus is on thermosetting elastomers, natural and synthetic rubbers and thermopla...

Polymethylsilsesquioxane is a type of silicone that is used in cosmetics and skincare products. It is used mainly as a protective ingredient but also helps to condition the skin and may help to improv...

Most Melt Blown Nonwoven Fabrics are made of polypropylene fibers. It is indispensable for products used to create clean environments, such as filters, masks, Hygiene, and wiping cloths. Highlights Th...

Polysulfides are chemical compounds that primarily comprise chains of sulfur atoms. These compounds exhibit various functional properties due to which they are chiefly consumed in building & construct...

Polythiols are compounds with several mercaptans functions. They can be used in different applications such as the preparation of adhesives and sealants or as chain transfer agents. Polythiols may als...

Polyvinyl alcohol film (PVA for short), the density of polyvinyl alcohol film is 1.26-1.29g/cm?. The refractive index is 1.52, and it will give off blue and white light when it's exposed to ultraviole...

Polyvinyl ethers are a class of organic polymers derived from vinyl ethers. Highlights The global Polyvinyl Ether market is projected to reach US$ million by 2028 from an estimated US$ million in 2022...

Aeration is a process of supplying sufficient oxygen under water. This process is naturally running every now and then. But sometimes the supply chain is not so good enough for the fishes. So, you hav...