Bosson Research: Market Research Reports

Report Overview: A polarisation separator is a combination of polarisation beam separators instead of conventional polarisers, so that the output of the filter becomes two beams of polarised light who...

Report Overview: A polarity detector is a device used to detect the polarity of an applied voltage. One can determine whether the voltage present in a particular line is positive or negative. The circ...

Report Overview: A polarization-insensitive Faraday isolator is a device which works for arbitrary polarization of the input beam. Such devices are often required in the context of fiber optics becaus...

Report Overview: Polio vaccines are vaccines used to prevent poliomyelitis. There are two types: one that uses inactivated poliovirus and is given by injection, and one that uses weakened poliovirus a...

Report Overview: Polyaluminium chloride (PAC) is manufactured in both liquid and powder form. The product is used in deodorants and antiperspirants, as a flocculant in water purification, in treatment...

Report Overview: The Global Poly-woven Dunnage Air Bags Market Size was estimated at USD 155.02 million in 2023 and is projected to reach USD 200.72 million by 2029, exhibiting a CAGR of 4.40% during...

Report Overview: The Global Polyacrylonitrile (PAN) Precursor for Carbon Fiber Market Size was estimated at USD 812.25 million in 2023 and is projected to reach USD 1051.70 million by 2029, exhibiting...

Report Overview: Polyamide 12 (PA 12, Nylon 12) is a polymer with the formula [(CH2)11C(O)NH]n. It is made from ?-aminolauric acid or laurolactam monomers that each have 12 carbons. It is Semi-crystal...

Report Overview: The Global Polyamide Based Hot Melt Adhesive Market Size was estimated at USD 990.40 million in 2023 and is projected to reach USD 1445.13 million by 2029, exhibiting a CAGR of 6.50%...

Report Overview: The Global Polyaspartic Concrete Floor Coatings Market Size was estimated at USD 459.99 million in 2023 and is projected to reach USD 552.46 million by 2029, exhibiting a CAGR of 3.10...

Report Overview: Polybutylene Terephthalate (PBT) is semi-crystalline, white or off-white polyester similar in both composition and properties to polyethyleneterephthalate (PET). It is a thermoplastic...

Report Overview: The Global Polycarbonate Card Market Size was estimated at USD 720.49 million in 2023 and is projected to reach USD 1045.39 million by 2029, exhibiting a CAGR of 6.40% during the fore...

Report Overview: The Global Polycarbonate Front Opening Shipping Box Market Size was estimated at USD 117.53 million in 2023 and is projected to reach USD 188.60 million by 2029, exhibiting a CAGR of...

Report Overview: The Global Polycarbosilanes Market Size was estimated at USD 304.95 million in 2023 and is projected to reach USD 631.52 million by 2029, exhibiting a CAGR of 12.90% during the foreca...

Report Overview: The term “polycarboxylate” actually applies to a very large family of polymers, which chemists can design to impart a special performance to concrete mixtures. Subsequent to the intro...

Report Overview: Ceramic brackets are used to create braces that blend in with a patient's teeth, making their orthodontic treatment less invasive. Fabricated from high strength ceramic polymers, thes...

Report Overview: The Global Polycrystalline CVD Diamond Market Size was estimated at USD 2681.61 million in 2023 and is projected to reach USD 6635.51 million by 2029, exhibiting a CAGR of 16.30% duri...

Report Overview: The Global Polycrystalline Diamond Compact Cutter Market Size was estimated at USD 4818.25 million in 2023 and is projected to reach USD 6238.67 million by 2029, exhibiting a CAGR of...

Report Overview: PCD (Polycrystalline Diamond) is a material used for cutting tools, and is made by sintering a synthetic diamond and a binder at a high temperature and pressure.PDC (Polycrystalline D...

Report Overview: The Global Polycyclohexylenedimethylene Terephthalate (PCT) Market Size was estimated at USD 138.29 million in 2023 and is projected to reach USD 189.60 million by 2029, exhibiting a...

Report Overview: The Global Polydimethylsiloxane (PDMS) Market Size was estimated at USD 4612.70 million in 2023 and is projected to reach USD 6181.45 million by 2029, exhibiting a CAGR of 5.00% durin...

Report Overview: Generally filled with polyester fiber, it is a substitute for down, the price is lower, and it needs to be used with the duvet cover. The Global Polyester Duvet Market Size was estima...

Report Overview: The Global Polyester Putty and Epoxy Putty Market Size was estimated at USD 430.80 million in 2023 and is projected to reach USD 548.25 million by 2029, exhibiting a CAGR of 4.10% dur...

Report Overview: Polyester or bounce pillows are an inexpensive choice. They are easy to care for and dry quickly. The Global Polyester Sleeping Pillow Market Size was estimated at USD 1024.59 million...

Report Overview: The Global Polyester TPU Films Market Size was estimated at USD 466.25 million in 2023 and is projected to reach USD 559.97 million by 2029, exhibiting a CAGR of 3.10% during the fore...

Report Overview: Velcro (Hook and Loop) consists of two components: typically, two lineal fabric strips (or, alternatively, round 'dots' or squares) which are attached (sewn or otherwise adhered) to t...

Report Overview: The Global Polyester Wax Market Size was estimated at USD 90.49 million in 2023 and is projected to reach USD 103.72 million by 2029, exhibiting a CAGR of 2.30% during the forecast pe...

Report Overview: The Global Polyetheramine (PEA) Market Size was estimated at USD 946.66 million in 2023 and is projected to reach USD 1283.19 million by 2029, exhibiting a CAGR of 5.20% during the fo...

Report Overview: The Global Polyethylene Fine Powder Market Size was estimated at USD 1058.23 million in 2023 and is projected to reach USD 1331.29 million by 2029, exhibiting a CAGR of 3.90% during t...

Report Overview: PEN(Polyethylene Naphthalate) is a new generation polymer and a high performance member of the polyester family. It is mainly used on three formulations, PEN Resin, PEN Film and PEN F...

Report Overview: The Global Polyethylene Naphthalate Two Formic Acid Glycol Ester (PEN) Market Size was estimated at USD 644.55 million in 2023 and is projected to reach USD 721.61 million by 2029, ex...

Report Overview: In the process of polyethylene production, a small amount of oligomers will be produced, namely low molecular weight polyethylene, also known as macromolecular wax or polyethylene wax...

Report Overview: The Global Polygon Scanner Motors Market Size was estimated at USD 380.61 million in 2023 and is projected to reach USD 584.12 million by 2029, exhibiting a CAGR of 7.40% during the f...

Report Overview: An innovative decorative glass product developed using the latest holographic technology. Laser glass is a kind of laminated glass, the application of laser holographic film technolog...

Report Overview: The Global Polyimide-Filled PTFE Powder Market Size was estimated at USD 474.03 million in 2023 and is projected to reach USD 628.02 million by 2029, exhibiting a CAGR of 4.80% during...

Report Overview: Molded profiles of polyimide PI (bars/sheets/tubes), injection molding, machining of various PI parts. Polyimide PI has high and low temperature resistance (-269~400?), high friction...

Report Overview: Polylactic acid (PLA) is a biodegradable and biocompatible polymer that has gained significant attention in the medical field. It is derived from renewable resources such as cornstarc...

Report Overview: The Global Polylactic Acid Fiber Market Size was estimated at USD 156.03 million in 2023 and is projected to reach USD 202.02 million by 2029, exhibiting a CAGR of 4.40% during the fo...

Report Overview: The Global Polylactic Acid (PLA) Market Size was estimated at USD 1110.66 million in 2023 and is projected to reach USD 1349.53 million by 2029, exhibiting a CAGR of 3.30% during the...

Report Overview: 3D printing equipment can produce metallic products through three - dimensional and printing technology. The Global Polymer 3D Printers Market Size was estimated at USD 288.59 million...

Report Overview: 3D printing equipment can produce metallic products through three - dimensional and printing technology. The Global Polymer 3D Printing Systems Market Size was estimated at USD 288.59...

Report Overview: 3D printing equipment can produce metallic products through three - dimensional and printing technology. The Global Polymer Additive Manufacturing Equipment Market Size was estimated...

Report Overview: 3D printing equipment can produce metallic products through three - dimensional and printing technology. The Global Polymer Additive Manufacturing Systems Market Size was estimated at...

Report Overview: The Global Polymer Antibacterial Agent Market Size was estimated at USD 662.49 million in 2023 and is projected to reach USD 1357.44 million by 2029, exhibiting a CAGR of 12.70% durin...

Report Overview: Polymer-dispersed liquid crystals (PDLCs) are a relatively new class of materials that hold promise for many applications ranging from switchable windows to projection displays. These...

Report Overview: The Global Polymer Insulator Market Size was estimated at USD 3323.12 million in 2023 and is projected to reach USD 5791.44 million by 2029, exhibiting a CAGR of 9.70% during the fore...

Report Overview: A photostabilizer is also called light stabilizer or photoprotective agent.There are two types of light stabilizers. One is UV absorber which is to absorb harmful UV light to protect...

Report Overview: Antioxidants for polymer materials refer to chemical substances that can inhibit or delay the oxidative degradation of polymer materials by oxygen or ozone in the atmosphere, thereby...

Report Overview: The Global Polymer Polyol Market Size was estimated at USD 5070.63 million in 2023 and is projected to reach USD 5382.58 million by 2029, exhibiting a CAGR of 1.00% during the forecas...

Report Overview: A polymeric foam is a foam, in liquid or solidified form, formed from polymers. Polymer foams have low density, good heat insulation, good sound insulation effects, high specific stre...