BlueQuark Research: Market Research Reports

Medical gases are widely used around hospitals and in the community and are piped into wards & clinical areas and supplied in cylinders. Medical gas is prescribed for a patient and classified as a dru...

Medical Grade Plastic is an integral part of the modern healthcare system complying with worldwide regulatory requirements engineered for medical applications. According to BlueQuark Research & Consul...

A d-block element, a poor heat, and a fair electricity conductor were formerly called hydrargyrum, the only liquid at standard temperature and pressure possessing atomic mass 80. According to BlueQuar...

Methanol is a colorless, fairly volatile, flammable, and poisonous liquid and the simplest compound in the long series of organic compounds known as alcohols. Thousands of everyday products use methan...

Methyl Methacrylate (MMA) Adhesives is a form of acrylic adhesive made from resin and hardener with the help of rubber and other similar strengthening agents, which can cure ambient temperature and pr...

Methylamine (CH3NH2) is the simplest primary amine, which is a colorless gas with a fish-like odor. It is prepared by Hofmann Rearrangement at a laboratory scale and by the reaction of methanol with a...

Mica is a member of the lustrous rock minerals that are hydrous silicates of Aluminum with other bases like potassium, magnesium, iron, and lithium, crystallizing in thin, translucent, usually elastic...

Microalgae are unicellular algal species that may either live in either colonies or singly. It consists of dinoflagellates, the diatoms, and other single-celled algal species. The major function of mi...

Cleaning products that contain living microorganisms as active ingredients are being primarily used in household, professional, and industrial cleaning applications. According to BlueQuark Research &...

Mining chemicals are an integral part of mining activity, and they play a vital role in enhancing the productivity and efficiency of mining processes such as extraction, recovery, water treatment, tra...

Modular construction is a process in which a building is constructed off-site, under controlled plant conditions, using the same materials and designing to the same codes and standards as conventional...

Molybdenum is a complex ductile silvery-white metallic element that resembles chromium and tungsten in many properties; it is used primarily in strengthening and hardening steel and is a trace element...

Natural Rubber (NR) is a milky liquid obtained from latex which is present in either latex vessels or in the cells of rubber-producing plants. According to BlueQuark Research & Consulting, the global...

Neoprene is produced by polymerization of chloroprene, exhibits good chemical stability, and maintains flexibility over a wide range of temperatures. According to BlueQuark Research & Consulting, the...

Nickel is a shiny silvery-white metal with a faint golden hue denoted by Ni and possessing atomic number 28. According to BlueQuark Research & Consulting, the Global Nickel market is expected to witne...

Niobium is a light grey, crystalline, ductile transition metal with the atomic number 41 that chemically resembles tantalum and is also known as Columbium. According to BlueQuark Research & Consulting...

Nitrile Rubber (NBR) is a synthetic rubber derived from acrylonitrile and butadiene. According to BlueQuark Research & Consulting, the global Nitrile Rubber market is expected to witness a significant...

Nitrobenzene is an intermediary organic chemical which is pale yellow with an almond-like odor, insoluble in water, and is produced commercially by the nitration of benzene and the nitration process i...

Nitrogen is a non-metallic chemical that is colorless, odorless, and inert gas used in various applications, including fertilizers, industrial, and feed, among others. Nitrogen is one of the primary a...

Non-stick coatings are used on surfaces to reduce the adhesive ability of other materials on them. One of the most important applications of non-stick coatings is in cookware where after applying the...

Nutraceutical excipients are inactive ingredients used during the production of nutraceuticals. Some of these ingredients include film coating, thickeners, preservatives, lubricants, binders, and colo...

Nylon 6 is a synthetic linear polyamide made from a monomer called caprolactam. It is one of the most extensively used polyamides across the globe. According to BlueQuark Research & Consulting, the gl...

Octyl Methoxycinnamate, Ethylhexyl Methoxycinnamate or octinoxate is an organic compound that is an ester, insoluble in water, formed from methoxy cinnamic acid 2-ethyl hexanol. According to BlueQuark...

Oilfield chemicals are reliable chemical compounds that are used in improving the effectiveness and efficiency of operations associated with an oilfield site, and the procedures under which these chem...

High demand for oxygen in the metal industry for cutting, welding, melting, etc. is one of the major driving factors of the market. There is a substantial increase in the production and consumption of...

The global Packaging Coatings market is segmented on the basis of Resin and Application. The Application segment is further segmented as Aerosol cans and Tubes, Beverage Cans, Caps and Closures, Food...

Paints and coatings as a material which, when spread over a surface as a relatively thin film, subsequently dries to form a solid, adhesive, cohesive, and protective layer. Paints and coatings are use...

Being about 30 times as rare as gold, palladium is a silvery-white platinum group metal (PGM) with the lowest melting point and density in the group. Malleability, ductility, and oxidation stability a...

Paraffin oil, also known as mineral oil, is a colorless, odorless, tasteless mineral oil produced by refining crude oil to gasoline and encompasses various hydrocarbons. According to BlueQuark Researc...

Paraffin Wax or Petroleum wax is a white and translucent hard wax consisting of a mixture of solid straight-chain hydrocarbons ranging in melting point from about 48° to 66° C (120° to 150° F). Accord...

Passive fire protection coatings are the protective barrier applied to an industrial component's surface that prevents damage during a fire in various end-user industries, including Building and Const...

Perfluorocarbons are a class of solvent molecules that can carry nonpolar gases, such as oxygen, nitrogen, and carbon dioxide. According to BlueQuark Research & Consulting, the global Perfluorocarbon...

Perlite is a concentric amorphous volcanic glass, usually grey and spherulitic with high water content. According to BlueQuark Research & Consulting, the Global Perlite market is expected to witness a...

Personal Protective Equipment (PPE) is most important in preventing transmission of contagious diseases such as Coronavirus, Ebola virus, etc., not only in treatment centers but also in various activi...

Petrolatum, also known as Mineral or Petroleum Jelly, contains a mixture of minerals, waxes, and oils, it is an odorless and inert petroleum product. According to BlueQuark Research & Consulting, the...

Phosphate rock is a naturally occurring ore of marine sedimentary with high phosphorus content consisting of a large amount of calcium phosphate, usually with other minerals such as calcium carbonate....

Phosphoric acid is a colorless, transparent, odorless, and viscous liquid with a chemical formula H3PO4 and it is also called orthophosphoric acid and is explosively acidic even at elevated dilution....

Pipe coatings are protective coatings applied on pipe metal surfaces to enhance its surface properties such as color, thermal properties, wear and electrical resistance, and corrosion resistance. The...

The Plastic Shredding Machine is a mechanical device used to shred plastic materials for recycling or waste management purposes. According to BlueQuark Research & Consulting, the global Plastic Shredd...

Plasticizers are colorless and odorless types of low-molecular-weight polymers that increase the spacing between crystalline polymer chains to make them more flexible and, thereby, tougher. According...

Platinum (Pt) is a precious, grayish-white, noncorroding, ductile, malleable heavy metallic element, which is practically inoxidizable except in the presence of bases and fusible only at extremely hig...

Poly-Methyl Methacrylate (PMMA) is a thermoplastic, transparent, and impact resistant substitute for glass. PMMA is utilized across several industries due to its properties such as high durability, hi...

Polyamide film, also known as Nylon, is a transparent and printable thermoplastic that has a relatively high melting point, rare strength and toughness, and good oxygen barrier properties and also res...

Polycarbonate is a thermoplastic material that is commonly used polymer due to its greater mechanical, chemical, and physical properties. Growing demand from the electronics & electrical industry due...

Polyester Fibers are one of the best options for attire and are utilized in the creation of different clothes, for example, pants, skirts, dresses, suits, coats, shirts, and open-air apparel. Polyeste...

Polyether polyols are polymers produced by reacting monomers of propylene oxide or ethylene oxide with an initiator (water, sorbitol, glycerine). According to BlueQuark Research & Consulting, the glob...

Polyethylene (PE), also known as polythene, is a group belonging to the thermoplastic polymers, and based on its polymerization process, it can be produced for different purposes. Its multifarious rol...

Polyimides are a transparent, highly heat resistant class of polymers with excellent temperature stability and a wide array of uses in specific conditions. According to BlueQuark Research & Consulting...

Polyisoprene is a group of mixtures that are synthetic polymers produced by polymerizing petroleum-derived raw materials, also a polymer of isoprene found in the latex of Hevea Brasiliensis trees and...

Polymer emulsion is the suspension of micro polymer in a liquid that acts as emulsifiers/stabilizers and colloidal dispersion of discrete polymer particles with a typical particle diameter of 0.01-1.0...