Continuous fiber reinforced thermoplastic composites are a new material that offer superior combination of lightweight and stiffness. They are also are also freely formable, easy to process and recycl...
Ethyl methyl carbonate (EMC) is a low viscosity solvent, generally prepared by the esterification of chloroformate with ethanol. It can also be prepared by transesterification of dimethyl carbonate (D...
Fumed silica, also known as pyrogenic silica (CAS number 112945-52-5), is a finely divided form of amorphous silica created in a flame by the high-temperature hydrolysis of silicon tetrachloride. This...
Radioactive Sources is a general term for radiation sources made of radioactive materials. Gamma Radioactive Sources, also known as gamma radioactive sources, a radioactive source with the main featur...
Core Materials are produced in a variety of forms including end-grain balsa wood, PVC foam, urethane foam, non-woven core fabrics. These lightweight materials are bonded between two composite skins an...
Carbon fiber is a long, thin strand of material about 0.0002-0.0004 in (0.005-0.010 mm) in diameter and composed mostly of carbon atoms. The carbon atoms are bonded together in microscopic crystals th...
Hyaluronic acid also called hyaluronan, is an anionic, nonsulfated glycosaminoglycan distributed widely throughout connective, epithelial, and neural tissues. It is unique among glycosaminoglycans in...
The term ?hybrid ceramic ball bearing? normally refers to a bearing assembly consisting of inner and outer rings of steel, with silicon nitride (Si3N4), Zirconium Dioxide (ZrO2), Silicon Carbide (SiC)...
Impact modifier resins increase the durability of molded or extruded plastics, particularly those subject to impact forces or cold weather service.BASF maintained the first place in the global manufac...
Maleic anhydride grafted polypropylene (MAH-g-PP) is a type of polypropylene that has been chemically modified by grafting maleic anhydride onto its polymer backbone. This modification enhances the po...
The 2025 U.S. tariff policies introduce profound uncertainty into the global economic landscape. This report critically examines the implications of recent tariff adjustments and international strateg...
Methanol synthesis is the formation of methanol from carbon oxides and hydrogen. Methanol synthesis catalysts were manufactured with various mole ratios of metal carbonates (zinc, copper and aluminum...
Molybdenum-99 (Mo-99) is a radioactive isotope with a half-life of approximately 66 hours. It is a key precursor in the production of Technetium-99m, which is widely used in medical imaging for diagno...
Potassium carbonate (K2CO3), also known as potash carbonate, is a translucent and odourless organic alkaline solution or a white and odourless solid chemical compound that is available in crystalline...
Aluminium Tri Hydrate (ATH) is an inorganic white fine crystalline, non-hygroscopic powder. Its solubility in water and organic solvents is very low. By volume, ATH is the largest flame retardant (FR)...
Silica Antiblock Additive is a kind of inorganic anti-blocks, because of the sub-micro size and large BET of silicon dioxide, it can act as interval material between the granules of powder, at the sam...
Citral (C10H16O), also called 3,7-dimethyl-2,6-octadienal, a pale yellow liquid, with a strong lemon odour, that occurs in the essential oils of plants. It is insoluble in water but soluble in ethanol...
Tantalum pentoxide powder, also known as tantalum(V) oxide, is the inorganic compound with the formula Ta2O5. It is a white solid that is insoluble in all solvents but is attacked by strong bases and...
Titanium metal powder is the result of processing this metal in a variety of ways to produce a fine metal powder. A silvery metal, titanium is highly valued for its great strength and unmatched corros...
Through the research, we can know up to 80% of energy loss through a window occurs at its edge.warm edge products aim to minimize this energy loss. Warm Edge Technology refers to the edge construction...
Acetic acid peroxide, also known as peracetic acid or PAA, is an organic compound. It is a colorless liquid with a characteristic pungent odor reminiscent of household vinegar. All commercially availa...
Agricultural dyes is a class of colorants used in seed, fertilizer, easy to identify seed in different levels, different stages. agricultural dyestuff that is applicable to fertilizer, pesticide and o...
Ceramic Membranes are type of artificial membranes made from inorganic materials (such as alumina, titania, zirconia oxides, silicon carbide or some glassy materials). They are used in membrane operat...
Aluminum pigments are produced almost exclusively using a wet-milling process that involves mineral spirits or other solvents. When aluminum powder is milled into a pigment, the geometry of the partic...
A welding wire is a slim metallic rod that is ignited to generate a heated arc for the purpose of fusing metal pieces together (welding) by rendering the wire soft via hammering or compressing under a...
Amino Silicone Oil is devoted to the basic ingredients of the textile softening agent. It has the best adsorption, compatibility and ease of emulsification. Using a mixer or homogenizer, amino silicon...
Ammonium Thiosulfate (ATS) is a widely used chemical compound, primarily employed in agricultural settings as a liquid fertilizer. It typically appears as a clear, colorless liquid that contains 12% n...
Amorphous steel is an alloy steel with advantageous magnetic properties necessary for use in distribution transformers, electric reactors, electric machines and middle and high frequency transformers....
Amorphous Metal Ribbon is a new soft magnetic material. It is produced through the advanced technology of rapid solidification of molten metal at a cooling rate of about a million ?/sec. During this p...
Amorphous poly-alpha-olefins (APAO/APO) are produced by (co-) polymerisation of ?-olefins, e.g. propylene or 1-butene with Ziegler-Natta catalysts. The (co-)polymers have an amorphous structure which...
Amorphous Ribbon is a new soft magnetic material. It is produced through the advanced technology of rapid solidification of molten metal at a cooling rate of about a million ?/sec. During this process...
Beeswax is the creamy coloured substance used by bees to build the comb that forms the structure of their nest. Very pure beeswax is white, but the presence of pollen and other substances cause it to...
Vanillin is a phenolic aldehyde, which is an organic compound with the molecular formula C8H8O3. Its functional groups include aldehyde, hydroxyl, and ether. It is the primary component of the extract...
3D printing or additive manufacturing is a process of making three dimensional solid objects from a digital file.While 3D Printing Polymer Materials and 3D Printing metal Materials are very important...
Boron trichloride is the inorganic compound with the formula BCl3. This colorless gas is a valuable reagent in organic synthesis. Boron trichloride is a highly reactive, corrosive gas that distributor...
Butane gas cartridge is one of the most efficient ways of storing fuel. Gas cartridges generally comprise a mixture of propane and butane contained under high pressures. Gas cartridges are generally m...
Cellulose film is a kind of cellulose film made from wood pulp, cotton pulp and other natural cellulose, which is processed by alkali, yellowing, forming and other chemical processes.FUTAMURA is the l...
This report studies the Cesium Iodide market, mainly focus on the caesium iodide crystals. The most important use of Caesium iodide. Caesium iodide (chemical formula CsI) is the ionic compound of caes...
Chlorfenapyr is a member of the class of pyrroles that is 4-bromo-1H-pyrrole-3-carbonitrile which is substituted at positions 1, 2 and 5 by ethoxymethyl, p-chlorophenyl and trifluoromethyl groups, res...
Filters
Search
Categories
Publishers
Regions
Price
Date
Pages
Offers
