Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011
In 2010, the total Asia-Pacific markets for dental prosthetics (made up of Japan, South Korea and Australia) were valued at $6.4 billion, a 0.1% increase over the previous year. The overall market CAD/CAM Prosthetics is estimated to grow at a double-digit rate over the forecast period.
The market segments covered in this report include:
Within the dental prosthetics and CAD/CAM market, companies such as Sirona, Nobel Biocare, 3M Espe and Degudent lead the market, among many others. This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.
The market segments covered in this report include:
- Crowns,
- Bridges,
- Inlays/Onlays,
- Veneers,
- Dentures,
- CAD/CAM System,
- CAD/CAM Prosthetics,
- CAD/CAM Blocks
Within the dental prosthetics and CAD/CAM market, companies such as Sirona, Nobel Biocare, 3M Espe and Degudent lead the market, among many others. This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.
EXECUTIVE SUMMARY
1.1 TOTAL ASIA-PACIFIC DENTAL PROSTHETICS AND CAD/CAM DEVICE MARKET
1.2 CAD/CAM PROSTHETICS MARKET
1.3 CAD/CAM BLOCK MARKET
1.4 TREND ANALYSIS BY COUNTRY
1.5 TREND ANALYSIS BY SEGMENT
1.6 DENTURE MARKET
1.7 CAD/CAM SYSTEM MARKET
1.8 COMPETITIVE ANALYSIS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 DENTAL HEALTH STATISTICS IN ASIA-PACIFIC
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.2.1 Material Types
3.2.3 Inlays/Onlays
3.2.3.1 Material Types
3.2.4 Veneers
3.2.4.1 Material Types
3.2.5 Dentures
3.2.5.1 Full Dentures
3.2.5.2 Partial Dentures
3.2.6 Manufacturing Process and Technological Developments
3.2.6.1 Conventional Fabrication
3.2.6.2 CAD/CAM Technology
3.2.6.3 Rapid Prototyping
3.2.6.4 Intra-Oral Digital Impression-Taking
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET OVERVIEW
4.4 MARKET ANALYSIS AND FORECAST
4.5 MARKET BY SEGMENT
4.5.1 Crown and Bridge Market
4.5.1.1 CAD/CAM Prosthetics Market
4.5.2 Denture Market
4.5.3 CAD/CAM System Market
4.5.3.1 Full In-Lab CAD/CAM System Market
4.5.3.2 Standalone Scanner CAD/CAM System Market
4.5.3.3 Chairside CAD/CAM System Market
4.6 TREND ANALYSIS BY SEGMENT
4.7 MARKET DRIVERS AND LIMITERS
4.7.1 Total Dental Prosthetics Market
4.7.1.1 Market Drivers
4.7.1.2 Market Limiters
4.7.2 Crown and Bridge Market
4.7.2.1 Market Drivers
4.7.2.2 Market Limiters
4.7.3 Denture Market
4.7.3.1 Market Drivers
4.7.3.2 Market Limiters
4.7.4 CAD/CAM System Market
4.7.4.1 Market Drivers
4.7.4.2 Market Limiters
4.8 COMPETITIVE ANALYSIS
4.8.1 CAD/CAM Prosthetics Market
4.8.1.1 In-Lab CAD/CAM Prosthetics
4.8.1.2 Chairside CAD/CAM Prosthetics Market
4.8.2 CAD/CAM System Market
4.9 CAD/CAM BLOCK MARKET
4.9.1 Introduction
4.9.2 Market Overview
4.9.3 CAD/CAM Block Market By Unit Type
4.9.3.1 Zirconia
4.9.3.2 Porcelain
4.9.3.3 Acrylic
4.9.3.4 Metal
4.10 MERGERS AND ACQUISITIONS
4.10.1 Market Highlights
COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 Median Age
5.1.3 GDP per Capita
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
5.1.5 Price Index
5.2 ASIA-PACIFIC DENTAL PROSTHETICS PER CAPITA SUMMARY
5.3 JAPAN
5.4 SOUTH KOREA
5.5 AUSTRALIA
5.6 DENTISTS PER POPULATION
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.2.1 Dental Prosthetic Device Market
6.2.2 Crown and Bridge Market
6.2.2.1 Porcelain-Fused Metal (PFM) Device Market
6.2.2.2 Full-Cast Device Market
6.2.2.3 All-Ceramic Device Market
6.2.2.4 Hard-Resin Device Market
6.2.3 CAD/CAM Prosthetics Market
6.2.3.1 Chairside CAD/CAM Prosthetics Market
6.2.3.2 In-Lab CAD/CAM Prosthetics Market
6.2.4 Denture Market
6.2.4.1 Full Denture Market
6.2.4.2 Partial Denture Market
6.2.5 CAD/CAM System Market
6.2.5.1 Full In-Lab CAD/CAM System Market
6.2.5.2 Standalone Scanner CAD/CAM System Market
6.2.5.3 Chairside CAD/CAM System Market
6.3 MARKET DRIVERS AND LIMITERS
6.3.1 Total Dental Prosthetics Market
6.3.1.1 Market Drivers
6.3.1.2 Market Limiters
6.3.2 Crown and Bridge Market
6.3.2.1 Market Drivers
6.3.2.2 Market Limiters
6.3.3 Denture Market
6.3.3.1 Market Drivers
6.3.3.2 Market Limiters
6.3.4 CAD/CAM System Market
6.3.4.1 Market Drivers
6.3.4.2 Market Limiters
6.4 COMPETITIVE ANALYSIS
6.4.1 CAD/CAM Prosthetics Market
6.4.1.1 In-Lab CAD/CAM Prosthetics Market
6.4.1.2 Chairside CAD/CAM Prosthetics Market
6.4.2 CAD/CAM System Market
6.4.2.1 Full In-Lab CAD/CAM System Market
6.4.2.2 Standalone Scanner CAD/CAM System Market
6.4.2.3 Chairside CAD/CAM System Market
Sirona
6.5 CAD/CAM BLOCK MARKET
6.5.1 Market Overview
6.5.2 : CAD/CAM Block Market by Material Type
6.5.2.1 Zirconia
6.5.2.2 Porcelain
6.5.2.3 Acrylic
6.5.2.4 Metal
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
7.1 INTRODUCTION
7.2 MARKET ANALYSIS AND FORECAST
7.2.1 Total Dental Prosthetics Market
7.2.2 Crown and Bridge Market
7.2.2.1 Porcelain-Fused Metal Market
7.2.2.2 Full-Cast Market
7.2.2.3 All-Ceramic Market
7.2.3 CAD/CAM Prosthetics Market
7.2.3.1 Chairside CAD/CAM Prosthetics
7.2.3.2 In-Lab CAD/CAM Prosthetics Market
7.2.4 Denture Market
7.2.4.1 Full Denture Market
7.2.4.2 Partial Denture Market
7.2.5 CAD/CAM System Market
7.2.5.1 Full In-Lab CAD/CAM System Market
7.2.5.2 Standalone Scanner CAD/CAM System Market
7.2.5.3 Chairside CAD/CAM System Market
7.3 MARKET DRIVERS AND LIMITERS
7.3.1 Total Dental Prosthetic Device Market
7.3.1.1 Market Drivers
7.3.1.2 Market Limiters
7.3.2 Crown and Bridge Market
7.3.2.1 Market Drivers
7.3.2.2 Market Limiters
7.3.3 Denture Market
7.3.3.1 Market Drivers
7.3.3.2 Market Limiters
7.3.4 CAD/CAM System Market
7.3.4.1 Market Drivers
7.3.4.2 Market Limiters
7.4 COMPETITIVE ANALYSIS
7.4.1 CAD/CAM Prosthetics Market
7.4.1.1 In-Lab CAD/CAM Prosthetics Market
7.4.1.2 Chairside CAD/CAM Prosthetics Market
7.4.2 Total CAD/CAM System Market
7.4.2.1 Full In-Lab CAD/CAM System Market
7.4.2.2 Standalone Scanner CAD/CAM System Market
7.4.2.3 Chairside CAD/CAM System Market
7.5 CAD/CAM BLOCK MARKET
7.5.1 Introduction
7.5.2 CAD/CAM Block Market
7.5.3 CAD/CAM Block Market by Material Type
7.5.3.1 Zirconia
7.5.3.2 Porcelain
7.5.3.3 Acrylic
7.5.3.4 Metal
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
8.1 INTRODUCTION
8.2 MARKET ANALYSIS AND FORECAST
8.2.1 Total Dental Prosthetics Market
8.2.2 Crown and Bridge Market
8.2.2.1 Porcelain-Fused Metal Market
8.2.2.2 Full-Cast Market
8.2.2.3 All-Ceramic Device Market
8.2.3 CAD/CAM Prosthetics Market
8.2.3.1 Chairside CAD/CAM Prosthetics Market
8.2.3.2 In-Lab CAD/CAM Prosthetics Market
8.2.4 Denture Market
8.2.4.1 Full Denture Market
8.2.4.2 Partial Denture Market
8.2.5 CAD/CAM System Market
8.2.5.1 Full In-Lab CAD/CAM System Market
8.2.5.2 Standalone Scanner CAD/CAM System Market
8.2.5.3 Chairside CAD/CAM System Market
8.3 MARKET DRIVERS AND LIMITERS
8.3.1 Total Dental Prosthetics Market
8.3.1.1 Market Drivers
8.3.1.2 Market Limiters
8.3.2 Crown and Bridge Market
8.3.2.1 Market Drivers
8.3.2.2 Market Limiters
8.3.3 Denture Market
8.3.3.1 Market Drivers
8.3.3.2 Market Limiters
8.3.4 CAD/CAM System Market
8.3.4.1 Market Drivers
8.3.4.2 Market Limiters
8.4 COMPETITIVE ANALYSIS
8.4.1 CAD/CAM Prosthetics Market
8.4.1.1 In-Lab CAD/CAM Prosthetics Market
8.4.2 CAD/CAM System Market
8.4.2.1 Full In-Lab System Market
8.4.2.2 Standalone Scanner CAD/CAM System Market
8.4.2.3 Chairside CAD/CAM System Market
8.5 CAD/CAM BLOCK MARKET
8.5.1 Market Overview
8.5.2 CAD/CAM Block Market by Material Type
8.5.2.1 Zirconia
8.5.2.2 Porcelain
8.5.2.3 Acrylic
8.5.2.4 Metal
ABBREVIATIONS
1.1 TOTAL ASIA-PACIFIC DENTAL PROSTHETICS AND CAD/CAM DEVICE MARKET
1.2 CAD/CAM PROSTHETICS MARKET
1.3 CAD/CAM BLOCK MARKET
1.4 TREND ANALYSIS BY COUNTRY
1.5 TREND ANALYSIS BY SEGMENT
1.6 DENTURE MARKET
1.7 CAD/CAM SYSTEM MARKET
1.8 COMPETITIVE ANALYSIS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 DENTAL HEALTH STATISTICS IN ASIA-PACIFIC
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.2.1 Material Types
3.2.3 Inlays/Onlays
3.2.3.1 Material Types
3.2.4 Veneers
3.2.4.1 Material Types
3.2.5 Dentures
3.2.5.1 Full Dentures
3.2.5.2 Partial Dentures
3.2.6 Manufacturing Process and Technological Developments
3.2.6.1 Conventional Fabrication
3.2.6.2 CAD/CAM Technology
3.2.6.3 Rapid Prototyping
3.2.6.4 Intra-Oral Digital Impression-Taking
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET OVERVIEW
4.4 MARKET ANALYSIS AND FORECAST
4.5 MARKET BY SEGMENT
4.5.1 Crown and Bridge Market
4.5.1.1 CAD/CAM Prosthetics Market
4.5.2 Denture Market
4.5.3 CAD/CAM System Market
4.5.3.1 Full In-Lab CAD/CAM System Market
4.5.3.2 Standalone Scanner CAD/CAM System Market
4.5.3.3 Chairside CAD/CAM System Market
4.6 TREND ANALYSIS BY SEGMENT
4.7 MARKET DRIVERS AND LIMITERS
4.7.1 Total Dental Prosthetics Market
4.7.1.1 Market Drivers
4.7.1.2 Market Limiters
4.7.2 Crown and Bridge Market
4.7.2.1 Market Drivers
4.7.2.2 Market Limiters
4.7.3 Denture Market
4.7.3.1 Market Drivers
4.7.3.2 Market Limiters
4.7.4 CAD/CAM System Market
4.7.4.1 Market Drivers
4.7.4.2 Market Limiters
4.8 COMPETITIVE ANALYSIS
4.8.1 CAD/CAM Prosthetics Market
4.8.1.1 In-Lab CAD/CAM Prosthetics
4.8.1.2 Chairside CAD/CAM Prosthetics Market
4.8.2 CAD/CAM System Market
4.9 CAD/CAM BLOCK MARKET
4.9.1 Introduction
4.9.2 Market Overview
4.9.3 CAD/CAM Block Market By Unit Type
4.9.3.1 Zirconia
4.9.3.2 Porcelain
4.9.3.3 Acrylic
4.9.3.4 Metal
4.10 MERGERS AND ACQUISITIONS
4.10.1 Market Highlights
COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 Median Age
5.1.3 GDP per Capita
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
5.1.5 Price Index
5.2 ASIA-PACIFIC DENTAL PROSTHETICS PER CAPITA SUMMARY
5.3 JAPAN
5.4 SOUTH KOREA
5.5 AUSTRALIA
5.6 DENTISTS PER POPULATION
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
6.1 INTRODUCTION
6.2 MARKET ANALYSIS AND FORECAST
6.2.1 Dental Prosthetic Device Market
6.2.2 Crown and Bridge Market
6.2.2.1 Porcelain-Fused Metal (PFM) Device Market
6.2.2.2 Full-Cast Device Market
6.2.2.3 All-Ceramic Device Market
6.2.2.4 Hard-Resin Device Market
6.2.3 CAD/CAM Prosthetics Market
6.2.3.1 Chairside CAD/CAM Prosthetics Market
6.2.3.2 In-Lab CAD/CAM Prosthetics Market
6.2.4 Denture Market
6.2.4.1 Full Denture Market
6.2.4.2 Partial Denture Market
6.2.5 CAD/CAM System Market
6.2.5.1 Full In-Lab CAD/CAM System Market
6.2.5.2 Standalone Scanner CAD/CAM System Market
6.2.5.3 Chairside CAD/CAM System Market
6.3 MARKET DRIVERS AND LIMITERS
6.3.1 Total Dental Prosthetics Market
6.3.1.1 Market Drivers
6.3.1.2 Market Limiters
6.3.2 Crown and Bridge Market
6.3.2.1 Market Drivers
6.3.2.2 Market Limiters
6.3.3 Denture Market
6.3.3.1 Market Drivers
6.3.3.2 Market Limiters
6.3.4 CAD/CAM System Market
6.3.4.1 Market Drivers
6.3.4.2 Market Limiters
6.4 COMPETITIVE ANALYSIS
6.4.1 CAD/CAM Prosthetics Market
6.4.1.1 In-Lab CAD/CAM Prosthetics Market
6.4.1.2 Chairside CAD/CAM Prosthetics Market
6.4.2 CAD/CAM System Market
6.4.2.1 Full In-Lab CAD/CAM System Market
6.4.2.2 Standalone Scanner CAD/CAM System Market
6.4.2.3 Chairside CAD/CAM System Market
Sirona
6.5 CAD/CAM BLOCK MARKET
6.5.1 Market Overview
6.5.2 : CAD/CAM Block Market by Material Type
6.5.2.1 Zirconia
6.5.2.2 Porcelain
6.5.2.3 Acrylic
6.5.2.4 Metal
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
7.1 INTRODUCTION
7.2 MARKET ANALYSIS AND FORECAST
7.2.1 Total Dental Prosthetics Market
7.2.2 Crown and Bridge Market
7.2.2.1 Porcelain-Fused Metal Market
7.2.2.2 Full-Cast Market
7.2.2.3 All-Ceramic Market
7.2.3 CAD/CAM Prosthetics Market
7.2.3.1 Chairside CAD/CAM Prosthetics
7.2.3.2 In-Lab CAD/CAM Prosthetics Market
7.2.4 Denture Market
7.2.4.1 Full Denture Market
7.2.4.2 Partial Denture Market
7.2.5 CAD/CAM System Market
7.2.5.1 Full In-Lab CAD/CAM System Market
7.2.5.2 Standalone Scanner CAD/CAM System Market
7.2.5.3 Chairside CAD/CAM System Market
7.3 MARKET DRIVERS AND LIMITERS
7.3.1 Total Dental Prosthetic Device Market
7.3.1.1 Market Drivers
7.3.1.2 Market Limiters
7.3.2 Crown and Bridge Market
7.3.2.1 Market Drivers
7.3.2.2 Market Limiters
7.3.3 Denture Market
7.3.3.1 Market Drivers
7.3.3.2 Market Limiters
7.3.4 CAD/CAM System Market
7.3.4.1 Market Drivers
7.3.4.2 Market Limiters
7.4 COMPETITIVE ANALYSIS
7.4.1 CAD/CAM Prosthetics Market
7.4.1.1 In-Lab CAD/CAM Prosthetics Market
7.4.1.2 Chairside CAD/CAM Prosthetics Market
7.4.2 Total CAD/CAM System Market
7.4.2.1 Full In-Lab CAD/CAM System Market
7.4.2.2 Standalone Scanner CAD/CAM System Market
7.4.2.3 Chairside CAD/CAM System Market
7.5 CAD/CAM BLOCK MARKET
7.5.1 Introduction
7.5.2 CAD/CAM Block Market
7.5.3 CAD/CAM Block Market by Material Type
7.5.3.1 Zirconia
7.5.3.2 Porcelain
7.5.3.3 Acrylic
7.5.3.4 Metal
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
8.1 INTRODUCTION
8.2 MARKET ANALYSIS AND FORECAST
8.2.1 Total Dental Prosthetics Market
8.2.2 Crown and Bridge Market
8.2.2.1 Porcelain-Fused Metal Market
8.2.2.2 Full-Cast Market
8.2.2.3 All-Ceramic Device Market
8.2.3 CAD/CAM Prosthetics Market
8.2.3.1 Chairside CAD/CAM Prosthetics Market
8.2.3.2 In-Lab CAD/CAM Prosthetics Market
8.2.4 Denture Market
8.2.4.1 Full Denture Market
8.2.4.2 Partial Denture Market
8.2.5 CAD/CAM System Market
8.2.5.1 Full In-Lab CAD/CAM System Market
8.2.5.2 Standalone Scanner CAD/CAM System Market
8.2.5.3 Chairside CAD/CAM System Market
8.3 MARKET DRIVERS AND LIMITERS
8.3.1 Total Dental Prosthetics Market
8.3.1.1 Market Drivers
8.3.1.2 Market Limiters
8.3.2 Crown and Bridge Market
8.3.2.1 Market Drivers
8.3.2.2 Market Limiters
8.3.3 Denture Market
8.3.3.1 Market Drivers
8.3.3.2 Market Limiters
8.3.4 CAD/CAM System Market
8.3.4.1 Market Drivers
8.3.4.2 Market Limiters
8.4 COMPETITIVE ANALYSIS
8.4.1 CAD/CAM Prosthetics Market
8.4.1.1 In-Lab CAD/CAM Prosthetics Market
8.4.2 CAD/CAM System Market
8.4.2.1 Full In-Lab System Market
8.4.2.2 Standalone Scanner CAD/CAM System Market
8.4.2.3 Chairside CAD/CAM System Market
8.5 CAD/CAM BLOCK MARKET
8.5.1 Market Overview
8.5.2 CAD/CAM Block Market by Material Type
8.5.2.1 Zirconia
8.5.2.2 Porcelain
8.5.2.3 Acrylic
8.5.2.4 Metal
ABBREVIATIONS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 4-1: Exchanges Rates for the U.S. Dollar, 2010
Figure 4-2: Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-3: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-4: Crown and Bridge Units Sold by Material Type, Asia-Pacific, 2007 – 2017
Figure 4-5: Crown and Bridge Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-6: CAD/CAM Prosthetics Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-7: Denture Units Sold by Type, Asia-Pacific, 2007 – 2017
Figure 4-8: Denture Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-9: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-10: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-11: Standalone Scanner CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-12: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-13: Growth Rates by Segment, Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017
Figure 4-14: Drivers and Limiters, Total Dental Prosthetics Market, Asia-Pacific, 2010
Figure 4-15: Drivers and Limiters, Crown and Bridge Market, Asia-Pacific, 2010
Figure 4-16: Drivers and Limiters, Denture Market, Asia-Pacific, 2010
Figure 4-17: Drivers and Limiters, CAD/CAM System Market, Asia-Pacific, 2010
Figure 4-18: Leading Competitors, Total CAD/CAM Prosthetics Market, Asia-Pacific, 2010
Figure 4-19: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific, 2010
Figure 4-20: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-21: Units Sold by Material Type, CAD/CAM Block Market, Asia-Pacific, 2007 – 2017
COUNTRY PROFILES
Figure 5-1: Price Index, Asia-Pacific, 2010
Figure 5-2: Country Indicators, Asia-Pacific, 2010
Figure 5-3: Population per Dentist, Asia-Pacfic, 2010
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M) .
Figure 6-2: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (JP¥M)
Figure 6-3: Crown and Bridge Market, Japan, 2007 – 2017 (US$)
Figure 6-4: Crown and Bridge Market, Japan, 2007 – 2017 (JP¥)
Figure 6-5: Crown and Bridge Units Sold by Material Type, Japan, 2007 – 2017
Figure 6-6: PFM Device Market, Japan, 2007 – 2017 (US$)
Figure 6-7: PFM Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-8: Full-Cast Device Market, Japan, 2007 – 2017 (US$)
Figure 6-9: Full-Cast Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-10: All-Ceramic Device Market, Japan, 2007 – 2017 (US$)
Figure 6-11: All-Ceramic Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-12: Hard-Resin Device Market, Japan, 2007 – 2017 (US$)
Figure 6-13: Hard-Resin Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-14: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-15: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-16: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-17: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-18: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$) .
Figure 6-19: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-20: Denture Market by Type, Japan, 2007 – 2017
Figure 6-21: Denture Market, Japan, 2007 – 2017 (US$)
Figure 6-22: Denture Market, Japan, 2007 – 2017 (JP¥)
Figure 6-23: Denture Units by Type, Japan, 2007 – 2017
Figure 6-24: CAD/CAM System Market, Japan, 2007 – 2017
Figure 6-25: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-26: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (JP¥) .
Figure 6-27: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-28: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-29: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-30: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-31: Drivers and Limiters, Total Dental Prosthetics Market, Japan, 2010
Figure 6-32: Drivers and Limiters, Crown and Bridge Market, Japan, 2010
Figure 6-33: Drivers and Limiters, Denture Market, Japan, 2010
Figure 6-34: Drivers and Limiters, CAD/CAM System Market, Japan, 2010
Figure 6-35: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
Figure 6-36: Leading Competitors, CAD/CAM System Market, Japan, 2010
Figure 6-37: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan, 2010
Figure 6-38: Leading Competitors, Standalone Scanner CAD/CAM System Market, Japan, 2010
Figure 6-39: CAD/CAM Block Market, Japan, 2007 – 2017 (US$)
Figure 6-40: CAD/CAM Block Market, Japan, 2007 – 2017 (JP¥)
Figure 6-41: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007 – 2017
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 7-1: Dental Prosthetics Market, South Korea, 2007 – 2017 (US$M)
Figure 7-2: Dental Prosthetics Market, South Korea, 2007 – 2017 (KR₩M)
Figure 7-3: Crown and Bridge Market, South Korea, 2007 – 2017 (US$)
Figure 7-4: Crown and Bridge market, South Korea, 2007 – 2017 (KR₩)
Figure 7-5: Crown and Bridge Units Sold by Material Type, South Korea, 2007 – 2017
Figure 7-6: PFM Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-7: PFM Device Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-8: Full-Cast Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-9: Full-Cast Device Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-10: All-Ceramic Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-11: All-Ceramic Device Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-12: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-13: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-14: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-15: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-16: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-17: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-18: Denture Market, South Korea, 2007 – 2017 (US$)
Figure 7-19: Denture Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-20: Denture Units by Type, South Korea, 2007 – 2017
Figure 7-21: CAD/CAM System Market, South Korea, 2007 – 2017
Figure 7-22: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-23: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-24: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-25: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-26: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-27: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-28: Drivers and Limiters, Dental Prosthetics Market, South Korea, 2010
Figure 7-29: Drivers and Limiters, Crown and Bridge Market, South Korea, 2010
Figure 7-30: Drivers and Limiters, Denture Market, South Korea, 2010
Figure 7-31: Drivers and Limiters, CAD/CAM System Market, South Korea, 2010
Figure 7-32: Leading Competitors, CAD/CAM Prosthetics Market, South Korea, 2010
Figure 7-33: Leading Competitors, CAD/CAM System Market, South Korea, 2010
Figure 7-34: Leading Competitors, Full In-Lab CAD/CAM System Market, South Korea, 2010
Figure 7-35: Leading Competitors, Standalone Scanner CAD/CAM System Market, South Korea, 2010
Figure 7-36: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$)
Figure 7-37: CAD/CAM Block Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-38: Units Sold by Material Type, CAD/CAM Block Market, South Korea, 2007 – 2017
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 8-1: Total Dental Prosthetics Market, Australia, 2007 – 2017 (US$M)
Figure 8-2: Total Dental Prosthetics Market, Australia, 2007 – 2017 (AU$M)
Figure 8-3: Crown and Bridge Market, Australia, 2007 – 2017 (US$)
Figure 8-4: Crown and Bridge Market, Australia, 2007 – 2017 (AU$)
Figure 8-5: Crown and Bridge Units Sold by Material Type, Australia, 2007 – 2017
Figure 8-6: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017 (US$)
Figure 8-7: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-8: Full-Cast Device Market, Australia, 2007 – 2017 (US$)
Figure 8-9: Full-Cast Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-10: All-Ceramic Device Market, Australia, 2007 – 2017 (US$)
Figure 8-11: All-Ceramic Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-12: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-13: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-14: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-15: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-18: Denture Market, Australia, 2007 – 2017 (US$)
Figure 8-19: Denture Market, Australia, 2007 – 2017 (AU$)
Figure 8-20: Units Sold by Type, Denture Market, Australia, 2007– 2017
Figure 8-21: CAD/CAM System Market, Australia, 2007 – 2017
Figure 8-22: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-23: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-24: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-25: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-26: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-27: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-28: Drivers and Limiters, Dental Prosthetics Market, Australia, 2010
Figure 8-29: Drivers and Limiters, Crown and Bridge Market, Australia, 2010
Figure 8-30: Drivers and Limiters, Denture Market, Australia, 2010
Figure 8-31: Drivers and Limiters, CAD/CAM System Market, Australia, 2010 .
Figure 8-32: Leading Competitiors, CAD/CAM Prosthetics Market, Australia, 2010
Figure 8-33: Leading Competitors, CAD/CAM System Market, Australia, 2010
Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market, Australia, 2010
Figure 8-35: Leading Competitors, Standalone Scanner System Market, Australia, 2010
Figure 8-36: Leading Competitors, Chairside CAD/CAM System Market, Australia, 2010
Figure 8-37: CAD/CAM Block Market, Australia, 2007 – 2017 (US$)
Figure 8-38: CAD/CAM Block Market, Australia, 2007 – 2017 (AU$)
Figure 8-39: Units Sold by Material Type, CAD/CAM Block Market, Australia, 2007 – 2017
ABBREVIATIONS
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 4-1: Exchanges Rates for the U.S. Dollar, 2010
Figure 4-2: Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-3: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-4: Crown and Bridge Units Sold by Material Type, Asia-Pacific, 2007 – 2017
Figure 4-5: Crown and Bridge Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-6: CAD/CAM Prosthetics Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-7: Denture Units Sold by Type, Asia-Pacific, 2007 – 2017
Figure 4-8: Denture Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-9: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Figure 4-10: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-11: Standalone Scanner CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-12: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-13: Growth Rates by Segment, Total Dental Prosthetic and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017
Figure 4-14: Drivers and Limiters, Total Dental Prosthetics Market, Asia-Pacific, 2010
Figure 4-15: Drivers and Limiters, Crown and Bridge Market, Asia-Pacific, 2010
Figure 4-16: Drivers and Limiters, Denture Market, Asia-Pacific, 2010
Figure 4-17: Drivers and Limiters, CAD/CAM System Market, Asia-Pacific, 2010
Figure 4-18: Leading Competitors, Total CAD/CAM Prosthetics Market, Asia-Pacific, 2010
Figure 4-19: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific, 2010
Figure 4-20: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$)
Figure 4-21: Units Sold by Material Type, CAD/CAM Block Market, Asia-Pacific, 2007 – 2017
COUNTRY PROFILES
Figure 5-1: Price Index, Asia-Pacific, 2010
Figure 5-2: Country Indicators, Asia-Pacific, 2010
Figure 5-3: Population per Dentist, Asia-Pacfic, 2010
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M) .
Figure 6-2: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (JP¥M)
Figure 6-3: Crown and Bridge Market, Japan, 2007 – 2017 (US$)
Figure 6-4: Crown and Bridge Market, Japan, 2007 – 2017 (JP¥)
Figure 6-5: Crown and Bridge Units Sold by Material Type, Japan, 2007 – 2017
Figure 6-6: PFM Device Market, Japan, 2007 – 2017 (US$)
Figure 6-7: PFM Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-8: Full-Cast Device Market, Japan, 2007 – 2017 (US$)
Figure 6-9: Full-Cast Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-10: All-Ceramic Device Market, Japan, 2007 – 2017 (US$)
Figure 6-11: All-Ceramic Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-12: Hard-Resin Device Market, Japan, 2007 – 2017 (US$)
Figure 6-13: Hard-Resin Device Market, Japan, 2007 – 2017 (JP¥)
Figure 6-14: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-15: CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-16: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$)
Figure 6-17: Chairside CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-18: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (US$) .
Figure 6-19: In-Lab CAD/CAM Prosthetics Market, Japan, 2007 – 2017 (JP¥)
Figure 6-20: Denture Market by Type, Japan, 2007 – 2017
Figure 6-21: Denture Market, Japan, 2007 – 2017 (US$)
Figure 6-22: Denture Market, Japan, 2007 – 2017 (JP¥)
Figure 6-23: Denture Units by Type, Japan, 2007 – 2017
Figure 6-24: CAD/CAM System Market, Japan, 2007 – 2017
Figure 6-25: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-26: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (JP¥) .
Figure 6-27: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-28: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-29: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$)
Figure 6-30: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (JP¥)
Figure 6-31: Drivers and Limiters, Total Dental Prosthetics Market, Japan, 2010
Figure 6-32: Drivers and Limiters, Crown and Bridge Market, Japan, 2010
Figure 6-33: Drivers and Limiters, Denture Market, Japan, 2010
Figure 6-34: Drivers and Limiters, CAD/CAM System Market, Japan, 2010
Figure 6-35: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
Figure 6-36: Leading Competitors, CAD/CAM System Market, Japan, 2010
Figure 6-37: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan, 2010
Figure 6-38: Leading Competitors, Standalone Scanner CAD/CAM System Market, Japan, 2010
Figure 6-39: CAD/CAM Block Market, Japan, 2007 – 2017 (US$)
Figure 6-40: CAD/CAM Block Market, Japan, 2007 – 2017 (JP¥)
Figure 6-41: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007 – 2017
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 7-1: Dental Prosthetics Market, South Korea, 2007 – 2017 (US$M)
Figure 7-2: Dental Prosthetics Market, South Korea, 2007 – 2017 (KR₩M)
Figure 7-3: Crown and Bridge Market, South Korea, 2007 – 2017 (US$)
Figure 7-4: Crown and Bridge market, South Korea, 2007 – 2017 (KR₩)
Figure 7-5: Crown and Bridge Units Sold by Material Type, South Korea, 2007 – 2017
Figure 7-6: PFM Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-7: PFM Device Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-8: Full-Cast Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-9: Full-Cast Device Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-10: All-Ceramic Device Market, South Korea, 2007 – 2017 (US$)
Figure 7-11: All-Ceramic Device Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-12: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-13: CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-14: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-15: Chairside CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-16: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (US$)
Figure 7-17: In-Lab CAD/CAM Prosthetics Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-18: Denture Market, South Korea, 2007 – 2017 (US$)
Figure 7-19: Denture Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-20: Denture Units by Type, South Korea, 2007 – 2017
Figure 7-21: CAD/CAM System Market, South Korea, 2007 – 2017
Figure 7-22: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-23: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-24: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-25: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-26: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (US$)
Figure 7-27: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-28: Drivers and Limiters, Dental Prosthetics Market, South Korea, 2010
Figure 7-29: Drivers and Limiters, Crown and Bridge Market, South Korea, 2010
Figure 7-30: Drivers and Limiters, Denture Market, South Korea, 2010
Figure 7-31: Drivers and Limiters, CAD/CAM System Market, South Korea, 2010
Figure 7-32: Leading Competitors, CAD/CAM Prosthetics Market, South Korea, 2010
Figure 7-33: Leading Competitors, CAD/CAM System Market, South Korea, 2010
Figure 7-34: Leading Competitors, Full In-Lab CAD/CAM System Market, South Korea, 2010
Figure 7-35: Leading Competitors, Standalone Scanner CAD/CAM System Market, South Korea, 2010
Figure 7-36: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$)
Figure 7-37: CAD/CAM Block Market, South Korea, 2007 – 2017 (KR₩)
Figure 7-38: Units Sold by Material Type, CAD/CAM Block Market, South Korea, 2007 – 2017
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Figure 8-1: Total Dental Prosthetics Market, Australia, 2007 – 2017 (US$M)
Figure 8-2: Total Dental Prosthetics Market, Australia, 2007 – 2017 (AU$M)
Figure 8-3: Crown and Bridge Market, Australia, 2007 – 2017 (US$)
Figure 8-4: Crown and Bridge Market, Australia, 2007 – 2017 (AU$)
Figure 8-5: Crown and Bridge Units Sold by Material Type, Australia, 2007 – 2017
Figure 8-6: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017 (US$)
Figure 8-7: Porcelain-Fused Metal Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-8: Full-Cast Device Market, Australia, 2007 – 2017 (US$)
Figure 8-9: Full-Cast Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-10: All-Ceramic Device Market, Australia, 2007 – 2017 (US$)
Figure 8-11: All-Ceramic Device Market, Australia, 2007 – 2017 (AU$)
Figure 8-12: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-13: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-14: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-15: Chairside CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-16: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$)
Figure 8-17: In-Lab CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (AU$)
Figure 8-18: Denture Market, Australia, 2007 – 2017 (US$)
Figure 8-19: Denture Market, Australia, 2007 – 2017 (AU$)
Figure 8-20: Units Sold by Type, Denture Market, Australia, 2007– 2017
Figure 8-21: CAD/CAM System Market, Australia, 2007 – 2017
Figure 8-22: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-23: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-24: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-25: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-26: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (US$)
Figure 8-27: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (AU$)
Figure 8-28: Drivers and Limiters, Dental Prosthetics Market, Australia, 2010
Figure 8-29: Drivers and Limiters, Crown and Bridge Market, Australia, 2010
Figure 8-30: Drivers and Limiters, Denture Market, Australia, 2010
Figure 8-31: Drivers and Limiters, CAD/CAM System Market, Australia, 2010 .
Figure 8-32: Leading Competitiors, CAD/CAM Prosthetics Market, Australia, 2010
Figure 8-33: Leading Competitors, CAD/CAM System Market, Australia, 2010
Figure 8-34: Leading Competitors, Full In-Lab CAD/CAM System Market, Australia, 2010
Figure 8-35: Leading Competitors, Standalone Scanner System Market, Australia, 2010
Figure 8-36: Leading Competitors, Chairside CAD/CAM System Market, Australia, 2010
Figure 8-37: CAD/CAM Block Market, Australia, 2007 – 2017 (US$)
Figure 8-38: CAD/CAM Block Market, Australia, 2007 – 2017 (AU$)
Figure 8-39: Units Sold by Material Type, CAD/CAM Block Market, Australia, 2007 – 2017
ABBREVIATIONS
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-2: Percentage of Prosthetics Sold by CAD/CAM Technology versus Conventional Methods, Asia-Pacific, 2007 – 2017
Chart 1-3: CAD/CAM Block Unit Share by Material Type, Asia-Pacific, 2010
Chart 1-4: Dental Prosthetics Market by Country, Asia-Pacific, 2010
Chart 1-5: Growth Rates by Segment, Crown and Bridge Market, Asia-Pacific, 2007 – 2017
Chart 1-6: Denture Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-7: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-8: Leading Competitors, CAD/CAM System Market, Asia-Pacific, 2010
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 4-1: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-2: Total CAD/CAM System Market, Asia-Pacific, 2010 – 2017 (US$M) .
Chart 4-3: Crown and Bridge Units by Material Type, Asia-Pacific, 2007 – 2017
Chart 4-4: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-5: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-6: Standalone Scanner CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-7: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-8: Leading Competitors, Total CAD/CAM Prosthetics Market, Asia-Pacific, 2010
Chart 4-9: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific, 2010
Chart 4-10: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-11: Units Sold by Material Type, CAD/CAM Block Market, Asia-Pacific, 2007 – 2017
COUNTRY PROFILES
Chart 5-1: Country Statistics, Japan, 2010
Chart 5-2: Country Statistics, South Korea, 2010
Chart 5-3: Country Statistics, Australia, 2010
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M)
Chart 6-2: Crown and Bridge Market, Japan, 2007 – 2017 (US$M)
Chart 6-3: Crown and Bridge Units Sold by Material Type, Japan, 2010
Chart 6-4: Crown and Bridge Units Sold by Material Type, Japan, 2017
Chart 6-5: Crown and Bridge Unit Share by Material Type, Japan, 2007 – 2017
Chart 6-6: Denture Market, Japan, 2007 – 2017 (US$M)
Chart 6-7: CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-8: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-9: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-10: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$M) .
Chart 6-11: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
Chart 6-12: Leading Competitors, CAD/CAM System Market, Japan, 2010
Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan, 2010
Chart 6-14: Leading Competitors, Standalone Scanner CAD/CAM System Market, Japan, 2010
Chart 6-15: CAD/CAM Block Market, Japan, 2007 – 2017 (US$M)
Chart 6-16: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007 – 2017
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 7-1: Dental Prosthetics Market, South Korea, 2007– 2017 (US$M)
Chart 7-2: Crown and Bridge Market, South Korea, 2007 – 2017 (US$M)
Chart 7-3: Crown and Bridge Market by Material Type, South Korea, 2010
Chart 7-4: Crown and Bridge Market by Material Type, South Korea, 2017
Chart 7-5: Crown and Bridge Unit Share by Material Type, South Korea, 2007 – 2017
Chart 7-6: Denture Market, South Korea, 2007 – 2017 (US$M)
Chart 7-7: CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-8: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-9: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-10: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-11: Leading Competitors, CAD/CAM Prosthetics Market, South Korea, 2010
Chart 7-12: Leading Competitors, CAD/CAM System Market, South Korea, 2010
Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Market, South Korea, 2010
Chart 7-14: Leading Competitors, Standalone Scanner CAD/CAM System Market, South Korea, 2010
Chart 7-15: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$M)
Chart 7-16: Units Sold by Material Type, CAD/CAM Block Market, South Korea, 2007 – 2017
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 8-1: Dental Prosthetics Market, Australia, 2007 – 2017 (US$M)
Chart 8-2: Crown and Bridge Market, Australia, 2007 – 2017 (US$M)
Chart 8-3: Crown and Bridge Units Sold by Material Type, Australia, 2010
Chart 8-4: Crowns and Bridge Units Sold by Material Type, Australia, 2017
Chart 8-5: Crown and Bridge Unit Share by Material Type, Australia, 2007 – 2017
Chart 8-6: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$M)
Chart 8-7: Denture Market Australia, 2007 – 2017 (US$M)
Chart 8-8: CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-9: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-10: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-11: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-12: Leading Competitors, CAD/CAM Prosthetics, Australia, 2010
Chart 8-13: Leading Competitors, CAD/CAM System Market, Australia, 2010
Chart 8-14: Leading Competitors, Full In-Lab CAD/CAM System Market, Australia, 2010
Chart 8-15: Leading Competitors, Standalone Scanner System Market, Australia, 2010
Chart 8-16: Leading Competitors, Chairside CAD/CAM System Market, Australia, 2010
Chart 8-17: CAD/CAM Block Market, Australia, 2007 – 2017 (US$M)
Chart 8-18: Units by Material Type, CAD/CAM Block Market, Australia, 2007 – 2017
ABBREVIATIONS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics and CAD/CAM Device Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-2: Percentage of Prosthetics Sold by CAD/CAM Technology versus Conventional Methods, Asia-Pacific, 2007 – 2017
Chart 1-3: CAD/CAM Block Unit Share by Material Type, Asia-Pacific, 2010
Chart 1-4: Dental Prosthetics Market by Country, Asia-Pacific, 2010
Chart 1-5: Growth Rates by Segment, Crown and Bridge Market, Asia-Pacific, 2007 – 2017
Chart 1-6: Denture Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-7: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 1-8: Leading Competitors, CAD/CAM System Market, Asia-Pacific, 2010
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
ASIA-PACIFIC DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 4-1: Total Dental Prosthetic Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-2: Total CAD/CAM System Market, Asia-Pacific, 2010 – 2017 (US$M) .
Chart 4-3: Crown and Bridge Units by Material Type, Asia-Pacific, 2007 – 2017
Chart 4-4: CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-5: Full In-Lab CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-6: Standalone Scanner CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-7: Chairside CAD/CAM System Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-8: Leading Competitors, Total CAD/CAM Prosthetics Market, Asia-Pacific, 2010
Chart 4-9: Leading Competitors, Total CAD/CAM System Market, Asia-Pacific, 2010
Chart 4-10: CAD/CAM Block Market, Asia-Pacific, 2007 – 2017 (US$M)
Chart 4-11: Units Sold by Material Type, CAD/CAM Block Market, Asia-Pacific, 2007 – 2017
COUNTRY PROFILES
Chart 5-1: Country Statistics, Japan, 2010
Chart 5-2: Country Statistics, South Korea, 2010
Chart 5-3: Country Statistics, Australia, 2010
JAPANESE DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 6-1: Total Dental Prosthetic Device Market, Japan, 2007 – 2017 (US$M)
Chart 6-2: Crown and Bridge Market, Japan, 2007 – 2017 (US$M)
Chart 6-3: Crown and Bridge Units Sold by Material Type, Japan, 2010
Chart 6-4: Crown and Bridge Units Sold by Material Type, Japan, 2017
Chart 6-5: Crown and Bridge Unit Share by Material Type, Japan, 2007 – 2017
Chart 6-6: Denture Market, Japan, 2007 – 2017 (US$M)
Chart 6-7: CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-8: Full In-Lab CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-9: Standalone Scanner CAD/CAM System Market, Japan, 2007 – 2017 (US$M)
Chart 6-10: Chairside CAD/CAM System Market, Japan, 2007 – 2017 (US$M) .
Chart 6-11: Leading Competitors, CAD/CAM Prosthetics Market, Japan, 2010
Chart 6-12: Leading Competitors, CAD/CAM System Market, Japan, 2010
Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Market, Japan, 2010
Chart 6-14: Leading Competitors, Standalone Scanner CAD/CAM System Market, Japan, 2010
Chart 6-15: CAD/CAM Block Market, Japan, 2007 – 2017 (US$M)
Chart 6-16: Units Sold by Material Type, CAD/CAM Block Market, Japan, 2007 – 2017
SOUTH KOREAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 7-1: Dental Prosthetics Market, South Korea, 2007– 2017 (US$M)
Chart 7-2: Crown and Bridge Market, South Korea, 2007 – 2017 (US$M)
Chart 7-3: Crown and Bridge Market by Material Type, South Korea, 2010
Chart 7-4: Crown and Bridge Market by Material Type, South Korea, 2017
Chart 7-5: Crown and Bridge Unit Share by Material Type, South Korea, 2007 – 2017
Chart 7-6: Denture Market, South Korea, 2007 – 2017 (US$M)
Chart 7-7: CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-8: Full In-Lab CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-9: Standalone Scanner CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-10: Chairside CAD/CAM System Market, South Korea, 2007 – 2017 (US$M)
Chart 7-11: Leading Competitors, CAD/CAM Prosthetics Market, South Korea, 2010
Chart 7-12: Leading Competitors, CAD/CAM System Market, South Korea, 2010
Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Market, South Korea, 2010
Chart 7-14: Leading Competitors, Standalone Scanner CAD/CAM System Market, South Korea, 2010
Chart 7-15: CAD/CAM Block Market, South Korea, 2007 – 2017 (US$M)
Chart 7-16: Units Sold by Material Type, CAD/CAM Block Market, South Korea, 2007 – 2017
AUSTRALIAN DENTAL PROSTHETIC AND CAD/CAM DEVICE MARKET
Chart 8-1: Dental Prosthetics Market, Australia, 2007 – 2017 (US$M)
Chart 8-2: Crown and Bridge Market, Australia, 2007 – 2017 (US$M)
Chart 8-3: Crown and Bridge Units Sold by Material Type, Australia, 2010
Chart 8-4: Crowns and Bridge Units Sold by Material Type, Australia, 2017
Chart 8-5: Crown and Bridge Unit Share by Material Type, Australia, 2007 – 2017
Chart 8-6: CAD/CAM Prosthetics Market, Australia, 2007 – 2017 (US$M)
Chart 8-7: Denture Market Australia, 2007 – 2017 (US$M)
Chart 8-8: CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-9: Full In-Lab CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-10: Standalone Scanner CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-11: Chairside CAD/CAM System Market, Australia, 2007 – 2017 (US$M)
Chart 8-12: Leading Competitors, CAD/CAM Prosthetics, Australia, 2010
Chart 8-13: Leading Competitors, CAD/CAM System Market, Australia, 2010
Chart 8-14: Leading Competitors, Full In-Lab CAD/CAM System Market, Australia, 2010
Chart 8-15: Leading Competitors, Standalone Scanner System Market, Australia, 2010
Chart 8-16: Leading Competitors, Chairside CAD/CAM System Market, Australia, 2010
Chart 8-17: CAD/CAM Block Market, Australia, 2007 – 2017 (US$M)
Chart 8-18: Units by Material Type, CAD/CAM Block Market, Australia, 2007 – 2017
ABBREVIATIONS
