Russian Market for Dental Prosthetics and CAD/CAM Devices 2009
The Russian Federation (Russia) dental prosthetics industry can be characterized as one that is poised for growth. With a growing economy and an expanding middle class, an increasing percentage of the population will be able to afford dental procedures. In the last ten years, the Moscow dental market has experienced rapid growth and is expected to grow steadily over the forecast period. The Russian CAD/CAM market is very underdeveloped as compared to European counterparts, and therefore will see double digit growth. The crown and bridges market (PFMs and all-ceramic) will also be a major market diver.
LIST OF FIGURES
LIST OF CHARTS
EXECUTIVE SUMMARY
1.1 OVERVIEW: EUROPEAN AND RUSSIAN FEDERATION MARKETS FOR DENTAL PROSTHETICS
1.2 TREND ANALYSIS BY COUNTRY
1.3 TREND ANALYSIS BY SEGMENT
1.4 MARKET FOR CROWNS AND BRIDGES
1.5 MARKET FOR DENTURES
1.6 CAD/CAM MARKET
1.7 LEADING DENTAL CAD/CAM COMPETITORS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 STATISTICS ON DENTAL HEALTH IN EUROPE AND THE RUSSIAN FEDERATION
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.3 Material Types
3.2.3.1 Full-Cast Crowns and Bridges
3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys
3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys
3.2.3.4 All-Ceramic Devices
3.3 INLAYS AND ONLAYS
3.3.1 Material Types
3.3.1.1 Gold
3.3.1.2 Porcelain
3.3.1.3 Composite Resin
3.4 DENTURES
3.4.1 Full Dentures
3.4.2 Partial Dentures
3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.5.1 Conventional Fabrication
3.5.2 CAD/CAM Technology
3.5.3 Three-Dimensional Printing
3.5.4 Digital Impression-Taking
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
4.1 INTRODUCTION
4.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
4.2.1 Market Analysis and Forecast
4.2.2 Market Drivers
4.2.3 Market Limiters
4.3 MARKET FOR CROWNS AND BRIDGES
4.3.1 Market Analysis and Forecast
4.3.2 Porcelain-Fused-To-Metal Market
4.3.3 Full-Cast Market
4.3.4 All-Ceramic Market
4.4 MARKET FOR DENTURES
4.4.1 Market Analysis and Forecast
4.4.2 Market for Full Dentures
4.4.3 Market for Partial Dentures
4.5 MARKET FOR CAD/CAM SYSTEMS
4.5.1 Market Analysis and Forecast
4.6 MARKET DRIVERS AND LIMITERS
4.6.1 Market Drivers
4.6.2 Market Limiters
4.6.3 Full In-Lab CAD/CAM Systems
4.6.3.1 Competitive Analysis
4.6.4 Standalone Scanner CAD/CAM Systems
4.6.4.1 Competitive Analysis
4.6.5 Chairside Systems
4.7 COMPETITIVE ANALYSIS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Figure 16-2: Dental Prosthetics Market (US$), Russian Federation, 2005 – 2015
Figure 16-3: Dental Prosthetics Market (RUB), Russian Federation, 2005 – 2015
Figure 16-4: Market Drivers and Limiters for Dental Prosthetics, Russian Federation, 2008
Figure 16-5: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Figure 16-6: Crowns and Bridges Market (US$), Russian Federation, 2005 – 201543
Figure 16-7: Crowns and Bridges Market (RUB), Russian Federation, 2005 – 2015
Figure 16-8: Crowns and Bridges Segmented by Material Type, Russian Federation, 2005 – 2015
Figure 16-9: PFM Devices Market (€), Russian Federation 2005 – 2015
Figure 16-10: PFM Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-11: PFM Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-12: Full-Cast Devices Market (€), Russian Federation, 2005 – 2015
Figure 16-13: Full-Cast Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-14: Full-Cast Devices Market (RUB), Russian Federation, 2005 – 201553
Figure 16-15: All-Ceramic Devices Market (€), Russian Federation, 2005 – 2015
Figure 16-16: All-Ceramic Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-17: All-Ceramic Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-18: Dentures Segmented by Type, Russian Federation, 2005 – 2015
Figure 16-19: Dentures Market (€), Russian Federation, 2005 – 2015
Figure 16-20: Dentures Market (US$), Russian Federation, 2005 – 2015
Figure 16-21: Dentures Market (RUB), Russian Federation, 2005 – 2015
Figure 16-22: Dentures Segmented By Type, Russian Federation, 2005 – 2015
Figure 16-23: CAD/CAM Systems, Russia (€, US$, RUB), 2005 – 2015
Figure 16-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 16-25: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-26: Full In-Lab CAD/CAM Systems Market, Russia (US$), 2005 – 2015
Figure 16-27: Full In-Lab CAD/CAM Systems Market, Russia (RUB), 2005 – 2015
Figure 16-28: Leading Competitors, Full In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (€), 2005 – 2015
Figure 16-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (US$), 2005 – 2015
Figure 16-31: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (RUB), 2005 – 2015
Figure 16-: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-33: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-34: Chairside CAD/CAM Systems Market, Russia (US$), 2005 – 2015
Figure 16-35: Chairside CAD/CAM Systems Market, Russia (RUB), 2005 – 201581
Figure 16-36: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-37: Total Market Share of CAD/CAM Systems, Russia, 2008
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market (€), Europe, 2005 – 2015
Chart 1-2: Market Value of Dental Prosthetics by Country, 2008
Chart 1-3: Full-Cast Crowns and Bridges Market (€), Europe, 2005 – 2015
Chart 1-4: Unit Share by Material Type for Crowns and Bridges, Europe, 2005 – 2015
Chart 1-5: Dentures Market (€), Europe, 2005 – 2015
Chart 1-6: CAD/CAM Systems Market (€), Europe, 2005 – 2015
Chart 1-7: Market Share for In-Lab CAD/CAM Systems, Europe, 2008
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Chart 16-2: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Chart 16-3: Crowns and Bridges Market Segmented by Material Type, Russian Federation, 2008
Chart 16-4: Crowns and Bridges Unit Share by Material Type, Russian Federation, 2005 – 2015
Chart 16-5: Dentures Market (€), Russian Federation, 2015 – 2015
Chart 16-6: CAD/CAM Systems Market (€), Russia, 2005 – 2015
Chart 16-7: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-9: Market for Standalone Scanner CAD/CAM Systems, Russia (€), 2005 – 2015
Chart 16-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-11: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-12: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Chart 16-13: Total Market Share of CAD/CAM Systems, Russia, 2008 86
EXECUTIVE SUMMARY
1.1 OVERVIEW: EUROPEAN AND RUSSIAN FEDERATION MARKETS FOR DENTAL PROSTHETICS
1.2 TREND ANALYSIS BY COUNTRY
1.3 TREND ANALYSIS BY SEGMENT
1.4 MARKET FOR CROWNS AND BRIDGES
1.5 MARKET FOR DENTURES
1.6 CAD/CAM MARKET
1.7 LEADING DENTAL CAD/CAM COMPETITORS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 STATISTICS ON DENTAL HEALTH IN EUROPE AND THE RUSSIAN FEDERATION
3.2 CROWNS AND BRIDGES
3.2.1 Crowns
3.2.2 Bridges
3.2.3 Material Types
3.2.3.1 Full-Cast Crowns and Bridges
3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys
3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys
3.2.3.4 All-Ceramic Devices
3.3 INLAYS AND ONLAYS
3.3.1 Material Types
3.3.1.1 Gold
3.3.1.2 Porcelain
3.3.1.3 Composite Resin
3.4 DENTURES
3.4.1 Full Dentures
3.4.2 Partial Dentures
3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.5.1 Conventional Fabrication
3.5.2 CAD/CAM Technology
3.5.3 Three-Dimensional Printing
3.5.4 Digital Impression-Taking
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
4.1 INTRODUCTION
4.2 MARKET OVERVIEW FOR DENTAL PROSTHETICS
4.2.1 Market Analysis and Forecast
4.2.2 Market Drivers
4.2.3 Market Limiters
4.3 MARKET FOR CROWNS AND BRIDGES
4.3.1 Market Analysis and Forecast
4.3.2 Porcelain-Fused-To-Metal Market
4.3.3 Full-Cast Market
4.3.4 All-Ceramic Market
4.4 MARKET FOR DENTURES
4.4.1 Market Analysis and Forecast
4.4.2 Market for Full Dentures
4.4.3 Market for Partial Dentures
4.5 MARKET FOR CAD/CAM SYSTEMS
4.5.1 Market Analysis and Forecast
4.6 MARKET DRIVERS AND LIMITERS
4.6.1 Market Drivers
4.6.2 Market Limiters
4.6.3 Full In-Lab CAD/CAM Systems
4.6.3.1 Competitive Analysis
4.6.4 Standalone Scanner CAD/CAM Systems
4.6.4.1 Competitive Analysis
4.6.5 Chairside Systems
4.7 COMPETITIVE ANALYSIS
LIST OF FIGURES
EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Figure 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Figure 16-2: Dental Prosthetics Market (US$), Russian Federation, 2005 – 2015
Figure 16-3: Dental Prosthetics Market (RUB), Russian Federation, 2005 – 2015
Figure 16-4: Market Drivers and Limiters for Dental Prosthetics, Russian Federation, 2008
Figure 16-5: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Figure 16-6: Crowns and Bridges Market (US$), Russian Federation, 2005 – 201543
Figure 16-7: Crowns and Bridges Market (RUB), Russian Federation, 2005 – 2015
Figure 16-8: Crowns and Bridges Segmented by Material Type, Russian Federation, 2005 – 2015
Figure 16-9: PFM Devices Market (€), Russian Federation 2005 – 2015
Figure 16-10: PFM Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-11: PFM Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-12: Full-Cast Devices Market (€), Russian Federation, 2005 – 2015
Figure 16-13: Full-Cast Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-14: Full-Cast Devices Market (RUB), Russian Federation, 2005 – 201553
Figure 16-15: All-Ceramic Devices Market (€), Russian Federation, 2005 – 2015
Figure 16-16: All-Ceramic Devices Market (US$), Russian Federation, 2005 – 2015
Figure 16-17: All-Ceramic Devices Market (RUB), Russian Federation, 2005 – 2015
Figure 16-18: Dentures Segmented by Type, Russian Federation, 2005 – 2015
Figure 16-19: Dentures Market (€), Russian Federation, 2005 – 2015
Figure 16-20: Dentures Market (US$), Russian Federation, 2005 – 2015
Figure 16-21: Dentures Market (RUB), Russian Federation, 2005 – 2015
Figure 16-22: Dentures Segmented By Type, Russian Federation, 2005 – 2015
Figure 16-23: CAD/CAM Systems, Russia (€, US$, RUB), 2005 – 2015
Figure 16-24: Market Drivers and Limiters for CAD/CAM System, 2008
Figure 16-25: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-26: Full In-Lab CAD/CAM Systems Market, Russia (US$), 2005 – 2015
Figure 16-27: Full In-Lab CAD/CAM Systems Market, Russia (RUB), 2005 – 2015
Figure 16-28: Leading Competitors, Full In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-29: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (€), 2005 – 2015
Figure 16-30: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (US$), 2005 – 2015
Figure 16-31: Market for Standalone Scanner In-Lab CAD/CAM Systems, Russia (RUB), 2005 – 2015
Figure 16-: Leading Competitors, Standalone Scanner In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-33: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Figure 16-34: Chairside CAD/CAM Systems Market, Russia (US$), 2005 – 2015
Figure 16-35: Chairside CAD/CAM Systems Market, Russia (RUB), 2005 – 201581
Figure 16-36: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Figure 16-37: Total Market Share of CAD/CAM Systems, Russia, 2008
LIST OF CHARTS
EXECUTIVE SUMMARY
Chart 1-1: Dental Prosthetics Market (€), Europe, 2005 – 2015
Chart 1-2: Market Value of Dental Prosthetics by Country, 2008
Chart 1-3: Full-Cast Crowns and Bridges Market (€), Europe, 2005 – 2015
Chart 1-4: Unit Share by Material Type for Crowns and Bridges, Europe, 2005 – 2015
Chart 1-5: Dentures Market (€), Europe, 2005 – 2015
Chart 1-6: CAD/CAM Systems Market (€), Europe, 2005 – 2015
Chart 1-7: Market Share for In-Lab CAD/CAM Systems, Europe, 2008
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS
RUSSIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
Chart 16-1: Dental Prosthetics Market (€), Russian Federation, 2005 – 2015
Chart 16-2: Crowns and Bridges Market (€), Russian Federation, 2005 – 2015
Chart 16-3: Crowns and Bridges Market Segmented by Material Type, Russian Federation, 2008
Chart 16-4: Crowns and Bridges Unit Share by Material Type, Russian Federation, 2005 – 2015
Chart 16-5: Dentures Market (€), Russian Federation, 2015 – 2015
Chart 16-6: CAD/CAM Systems Market (€), Russia, 2005 – 2015
Chart 16-7: Full In-Lab CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-8: Leading Competitors, Full In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-9: Market for Standalone Scanner CAD/CAM Systems, Russia (€), 2005 – 2015
Chart 16-10: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System Units, Russia, 2008
Chart 16-11: Chairside CAD/CAM Systems Market, Russia (€), 2005 – 2015
Chart 16-12: Total Market Share of In-Lab CAD/CAM Systems, Russia, 2008
Chart 16-13: Total Market Share of CAD/CAM Systems, Russia, 2008 86
