European Markets for Dental Prosthetics and CAD/CAM Devices
In 2012, the total European market for dental prosthetics and CAD/CAM systems was valued at nearly €10 billion.
The European markets include Austria, Benelux (Belgium, the Netherlands and Luxembourg), France, Germany, Italy, Portugal, Scandinavia (Sweden, Finland, Norway and Denmark), Spain, Switzerland and the United Kingdom. Effects of the economic instability in Europe affected various segments of the market in adverse ways; however, both the prosthetic and CAD/CAM system markets are expected to continue to rise over the 2012–2019 forecast period. Factors including the aging baby boomer population, popular culture and the media are also driving dental procedures.
The number of dentists per capita varies greatly between countries. The Scandinavian countries have the lowest population-to-dentist ratio, while the Netherlands has one of the highest. There are many factors at play here. First, state-sponsored and sophisticated healthcare systems of Scandinavian countries account for better dental care, involving more dentists per capita. Second, small countries like Switzerland, Austria and the Netherlands have high population-to-dentist ratios because small populations have a harder time generating significant numbers of dentists. Finally, Spain stands as an outlier with its population-to-dentist ratio as the highest in Europe. This is due to the initial lower levels of dentists in Spain, which is now experiencing rapid growth.
The European markets include Austria, Benelux (Belgium, the Netherlands and Luxembourg), France, Germany, Italy, Portugal, Scandinavia (Sweden, Finland, Norway and Denmark), Spain, Switzerland and the United Kingdom. Effects of the economic instability in Europe affected various segments of the market in adverse ways; however, both the prosthetic and CAD/CAM system markets are expected to continue to rise over the 2012–2019 forecast period. Factors including the aging baby boomer population, popular culture and the media are also driving dental procedures.
The number of dentists per capita varies greatly between countries. The Scandinavian countries have the lowest population-to-dentist ratio, while the Netherlands has one of the highest. There are many factors at play here. First, state-sponsored and sophisticated healthcare systems of Scandinavian countries account for better dental care, involving more dentists per capita. Second, small countries like Switzerland, Austria and the Netherlands have high population-to-dentist ratios because small populations have a harder time generating significant numbers of dentists. Finally, Spain stands as an outlier with its population-to-dentist ratio as the highest in Europe. This is due to the initial lower levels of dentists in Spain, which is now experiencing rapid growth.
EXECUTIVE SUMMARY
1.1 EUROPEAN MARKETS FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
1.2 DENTAL STATISTICS
1.3 TREND ANALYSIS BY COUNTRY
1.4 TREND ANALYSIS BY SEGMENT
1.5 CROWN & BRIDGE MARKET
1.6 CAD/CAM PROSTHETIC MARKET
1.7 DENTURE MARKET
1.8 FULL IN-LAB CAD/CAM SYSTEM MARKET
1.9 STANDALONE CAD/CAM SCANNER MARKET
1.10 CHAIRSIDE CAD/CAM SYSTEM MARKET
1.11 /CAM BLOCK MARKET
1.12 INTRA-ORAL DIGITAL IMPRESSION TAKING SCANNER MARKET
1.13 COMPETITIVE ANALYSIS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 INTRODUCTION
3.2 DENTAL HEALTH STATISTICS IN EUROPE
3.3 CROWNS AND BRIDGES
3.3.1 Crowns
3.3.2 Bridges
3.3.2.1 Material Types
3.4 INLAY/ONLAYS
3.4.1 Material Types
3.5 VENEERS
3.5.1 Material Types
3.6 DENTURES
3.6.1 Full Dentures
3.6.2 Partial Dentures
3.7 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.7.1 Conventional Fabrication
3.7.2 CAD/CAM Technology
3.7.3 Rapid Prototyping
3.7.4 Intra-Oral Digital Impression-Taking
3.7.5 Smaller In-House Milling Machines
3.7.6 Forecasted Two-Layered Pricing in the European Market
EUROPEAN DENTAL PROSTHETIC AND CAD/CAM SYSTEM MARKET OVERVIEW
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET OVERVIEW
4.4 MARKET BY SEGMENT
4.5 TREND ANALYSIS BY SEGMENT
4.6 PENETRATION OF DENTAL IMPLANT PROSTHETICS IN EUROPE
4.7 MARKET DRIVERS AND LIMITERS
4.7.1 Market Drivers
4.7.2 Market Limiters
4.8 COMPETITIVE ANALYSIS
4.8.1 CAD/CAM Prosthetics Market
4.8.2 CAD/CAM System Market
4.9 MERGERS, ACQUISITIONS AND PARTNERSHIPS
COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 GDP per Capita
5.1.3 Crowns and Bridges Placed per 1,000 Inhabitants
5.1.4 Price Index for Dental Prosthetics
5.1.5 Price Index for CAD/CAM Devices
5.1.6 Median Age
5.2 GERMANY
5.3 FRANCE
5.4 UNITED KINGDOM
5.5 ITALY
5.6 SPAIN
5.7 BENELUX
5.8 SCANDINAVIA
5.9 AUSTRIA
5.10 SWITZERLAND
5.11 PORTUGAL
CROWN AND BRIDGE MARKET
6.1 INTRODUCTION
6.2 MARKET OVERVIEW
6.3 MARKET ANALYSIS AND FORECAST
6.3.1 Total Crown and Bridge Market
6.3.2 Non-Precious PFM Crown and Bridge Market
6.3.3 Semi-Precious PFM Crown and Bridge Market
6.3.4 Precious PFM Crown and Bridge Market
6.3.5 Full-Cast Crown and Bridge Market
6.3.6 All-Ceramic Crown and Bridge Market
6.4 MARKET DRIVERS AND LIMITERS
6.4.1 Market Drivers
6.4.2 Market Limiters
CAD/CAM PROSTHETICS MARKET
7.1 INTRODUCTION
7.2 MARKET ANALYSIS AND FORECAST
7.3 UNIT ANALYSIS
7.3.1 Unit Analysis by Type
7.3.1.1 Chairside
7.3.1.2 In-Lab
7.4 MARKET DRIVERS AND LIMITERS
7.4.1 Market Drivers
7.4.2 Market Limiters
7.5 COMPETITIVE ANALYSIS
DENTURE MARKET
8.1 INTRODUCTION
8.2 MARKET OVERVIEW
8.3 MARKET ANALYSIS AND FORECAST
8.3.1 Total Denture Market
8.3.1 Full Denture Market
8.3.2 Partial Denture Market
8.4 MARKET DRIVERS AND LIMITERS
8.4.1 Market Drivers
8.4.2 Market Limiters
CAD/CAM SYSTEM MARKET
9.1 INTRODUCTION
9.2 MARKET OVERVIEW
9.3 MARKET ANALYSIS AND FORECAST
9.3.1 Full In-Lab CAD/CAM System Market
9.3.2 Standalone CAD/CAM Scanner Market
9.3.3 Chairside CAD/CAM System Market
9.4 MARKET DRIVERS AND LIMITERS
9.4.1 Market Drivers
9.4.2 Market Limiters
9.5 COMPETITIVE ANALYSIS
APPENDIX I: CAD/CAM BLOCK MARKET
10.1 INTRODUCTION
10.2 MARKET ANALYSIS AND FORECAST
10.2.1 CAD/CAM Block Market
10.2.2 CAD/CAM Block Market by Material Type
10.2.2.1 Zirconia
10.2.2.2 Porcelain
10.2.2.3 Acrylic/Composite
10.2.2.4 Metal
10.3 CAD/CAM BLOCK MARKET BY SEGMENT
10.3.1 Lab vs. Chairside Markets
10.4 MARKET DRIVERS AND LIMITERS
10.4.1 Market Drivers
10.4.2 Market Limiters
10.5 COMPETITIVE ANALYSIS
APPENDIX II: INTRA-ORAL DIGITAL IMPRESSION TAKING SYSTEM MARKET
11.1 INTRODUCTION
11.2 MARKET ANALYSIS AND FORECAST
11.3 MARKET DRIVERS AND LIMITERS
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 COMPETITIVE ANALYSIS
ABBREVIATIONS
1.1 EUROPEAN MARKETS FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
1.2 DENTAL STATISTICS
1.3 TREND ANALYSIS BY COUNTRY
1.4 TREND ANALYSIS BY SEGMENT
1.5 CROWN & BRIDGE MARKET
1.6 CAD/CAM PROSTHETIC MARKET
1.7 DENTURE MARKET
1.8 FULL IN-LAB CAD/CAM SYSTEM MARKET
1.9 STANDALONE CAD/CAM SCANNER MARKET
1.10 CHAIRSIDE CAD/CAM SYSTEM MARKET
1.11 /CAM BLOCK MARKET
1.12 INTRA-ORAL DIGITAL IMPRESSION TAKING SCANNER MARKET
1.13 COMPETITIVE ANALYSIS
RESEARCH METHODOLOGY
2.1 RESEARCH SCOPE
2.2 IDATA’S 9-STEP METHODOLOGY
Step 1: Project Initiation & Team Selection
Step 2: Prepare Data Systems and Perform Secondary Research
Step 3: Preparation for Interviews & Questionnaire Design
Step 4: Performing Primary Research
Step 5: Research Analysis: Establishing Baseline Estimates
Step 6: Market Forecast and Analysis
Step 7: Identify Strategic Opportunities
Step 8: Final Review and Market Release
Step 9: Customer Feedback and Market Monitoring
INTRODUCTION TO DENTAL PROSTHETICS
3.1 INTRODUCTION
3.2 DENTAL HEALTH STATISTICS IN EUROPE
3.3 CROWNS AND BRIDGES
3.3.1 Crowns
3.3.2 Bridges
3.3.2.1 Material Types
3.4 INLAY/ONLAYS
3.4.1 Material Types
3.5 VENEERS
3.5.1 Material Types
3.6 DENTURES
3.6.1 Full Dentures
3.6.2 Partial Dentures
3.7 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
3.7.1 Conventional Fabrication
3.7.2 CAD/CAM Technology
3.7.3 Rapid Prototyping
3.7.4 Intra-Oral Digital Impression-Taking
3.7.5 Smaller In-House Milling Machines
3.7.6 Forecasted Two-Layered Pricing in the European Market
EUROPEAN DENTAL PROSTHETIC AND CAD/CAM SYSTEM MARKET OVERVIEW
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET OVERVIEW
4.4 MARKET BY SEGMENT
4.5 TREND ANALYSIS BY SEGMENT
4.6 PENETRATION OF DENTAL IMPLANT PROSTHETICS IN EUROPE
4.7 MARKET DRIVERS AND LIMITERS
4.7.1 Market Drivers
4.7.2 Market Limiters
4.8 COMPETITIVE ANALYSIS
4.8.1 CAD/CAM Prosthetics Market
4.8.2 CAD/CAM System Market
4.9 MERGERS, ACQUISITIONS AND PARTNERSHIPS
COUNTRY PROFILES
5.1 INTRODUCTION
5.1.1 Population
5.1.2 GDP per Capita
5.1.3 Crowns and Bridges Placed per 1,000 Inhabitants
5.1.4 Price Index for Dental Prosthetics
5.1.5 Price Index for CAD/CAM Devices
5.1.6 Median Age
5.2 GERMANY
5.3 FRANCE
5.4 UNITED KINGDOM
5.5 ITALY
5.6 SPAIN
5.7 BENELUX
5.8 SCANDINAVIA
5.9 AUSTRIA
5.10 SWITZERLAND
5.11 PORTUGAL
CROWN AND BRIDGE MARKET
6.1 INTRODUCTION
6.2 MARKET OVERVIEW
6.3 MARKET ANALYSIS AND FORECAST
6.3.1 Total Crown and Bridge Market
6.3.2 Non-Precious PFM Crown and Bridge Market
6.3.3 Semi-Precious PFM Crown and Bridge Market
6.3.4 Precious PFM Crown and Bridge Market
6.3.5 Full-Cast Crown and Bridge Market
6.3.6 All-Ceramic Crown and Bridge Market
6.4 MARKET DRIVERS AND LIMITERS
6.4.1 Market Drivers
6.4.2 Market Limiters
CAD/CAM PROSTHETICS MARKET
7.1 INTRODUCTION
7.2 MARKET ANALYSIS AND FORECAST
7.3 UNIT ANALYSIS
7.3.1 Unit Analysis by Type
7.3.1.1 Chairside
7.3.1.2 In-Lab
7.4 MARKET DRIVERS AND LIMITERS
7.4.1 Market Drivers
7.4.2 Market Limiters
7.5 COMPETITIVE ANALYSIS
DENTURE MARKET
8.1 INTRODUCTION
8.2 MARKET OVERVIEW
8.3 MARKET ANALYSIS AND FORECAST
8.3.1 Total Denture Market
8.3.1 Full Denture Market
8.3.2 Partial Denture Market
8.4 MARKET DRIVERS AND LIMITERS
8.4.1 Market Drivers
8.4.2 Market Limiters
CAD/CAM SYSTEM MARKET
9.1 INTRODUCTION
9.2 MARKET OVERVIEW
9.3 MARKET ANALYSIS AND FORECAST
9.3.1 Full In-Lab CAD/CAM System Market
9.3.2 Standalone CAD/CAM Scanner Market
9.3.3 Chairside CAD/CAM System Market
9.4 MARKET DRIVERS AND LIMITERS
9.4.1 Market Drivers
9.4.2 Market Limiters
9.5 COMPETITIVE ANALYSIS
APPENDIX I: CAD/CAM BLOCK MARKET
10.1 INTRODUCTION
10.2 MARKET ANALYSIS AND FORECAST
10.2.1 CAD/CAM Block Market
10.2.2 CAD/CAM Block Market by Material Type
10.2.2.1 Zirconia
10.2.2.2 Porcelain
10.2.2.3 Acrylic/Composite
10.2.2.4 Metal
10.3 CAD/CAM BLOCK MARKET BY SEGMENT
10.3.1 Lab vs. Chairside Markets
10.4 MARKET DRIVERS AND LIMITERS
10.4.1 Market Drivers
10.4.2 Market Limiters
10.5 COMPETITIVE ANALYSIS
APPENDIX II: INTRA-ORAL DIGITAL IMPRESSION TAKING SYSTEM MARKET
11.1 INTRODUCTION
11.2 MARKET ANALYSIS AND FORECAST
11.3 MARKET DRIVERS AND LIMITERS
11.3.1 Market Drivers
11.3.2 Market Limiters
11.4 COMPETITIVE ANALYSIS
ABBREVIATIONS