This report is currently available in Russian language only. However, we can provide an English version of the report within 3 weeks after receiving a payment.
The report is devoted to analysis of Russian market of sintered carbide alloy metal-working tools. The report includes 5 Sections, its volume is 96 pages. The text is illustrated with 31 Tables and 24 Figures.
Section 1 presents the main ideas of metal-cutting tools, their classification, characteristics of carbide tool alloys and features of their application.
Section 2 estimates production of all-metal carbide tools, as well as sintered carbide alloy tips and replaceable indexable inserts. A special part is devoted to description of the largest company-producers, their products (nomenclature, prices).
Foreign trade operations with carbide tools and their influence on Russian market of carbide are described in Section 3. Special attention is given to the import supplies.
Section 4 describes provision with carbide tools in Russia and demand for the tools.
Section 5 presents summary of collected and analysed opinions and proposals of machine building sector specialists, demonstrates possible machine building sector development scenarios in conditions of the global financial crisis, presents the main directions of modernization of tools production. As a result, forecast of possible development of the production and consumption of carbide tools up to 2014 is given.
The main information sources were data of Federal Customs Service (FCS) and Federal Service of State Statistics (FSSS) of Russia, which allowed estimation of general situation inn this sphere in the country. Important information was obtained from interviews with specialists of leading production companies of the sector.
LLC «InfoMine Research Group» hopes the research will assist specialists in their own evaluations of standing of carbide tool market in Russia.
The report is devoted to analysis of Russian market of sintered carbide alloy metal-working tools. The report includes 5 Sections, its volume is 96 pages. The text is illustrated with 31 Tables and 24 Figures.
Section 1 presents the main ideas of metal-cutting tools, their classification, characteristics of carbide tool alloys and features of their application.
Section 2 estimates production of all-metal carbide tools, as well as sintered carbide alloy tips and replaceable indexable inserts. A special part is devoted to description of the largest company-producers, their products (nomenclature, prices).
Foreign trade operations with carbide tools and their influence on Russian market of carbide are described in Section 3. Special attention is given to the import supplies.
Section 4 describes provision with carbide tools in Russia and demand for the tools.
Section 5 presents summary of collected and analysed opinions and proposals of machine building sector specialists, demonstrates possible machine building sector development scenarios in conditions of the global financial crisis, presents the main directions of modernization of tools production. As a result, forecast of possible development of the production and consumption of carbide tools up to 2014 is given.
The main information sources were data of Federal Customs Service (FCS) and Federal Service of State Statistics (FSSS) of Russia, which allowed estimation of general situation inn this sphere in the country. Important information was obtained from interviews with specialists of leading production companies of the sector.
LLC «InfoMine Research Group» hopes the research will assist specialists in their own evaluations of standing of carbide tool market in Russia.
ANNOTATION
INTRODUCTION
1. GENERAL INFORMATION ABOUT METAL-CUTTING TOOLS
1.1. The main ideas of cutting process
1.2. Classification of metal-cutting tools
1.3. Tool materials
1.4. Carbide alloy tools and cutting conditions
2. PRODUCTION OF CARBIDE METAL-CUTTING TOOLS
2.1. General characteristics
2.2. Characteristics of the main producers of carbide metal-cutting tools
2.2.1. JSC «KAMAZinstrumentspetsmash» (KISM)
2.2.2. Belgorod region (LLC «SKIF-M», CJSC «Belgorod mill plant» (BZF) and CJSC «Belgorod tool plant» (BIZ))
2.2.3. JSC «Kanashsky cutting tool plant»
2.2.4. JSC «Kirzhach tool plant»
2.2.5. JSC «Serpukhov tool plant «Twintos»
2.2.6. JSC «Izhevsk tool plant»
2.3. Characteristics of the main producers of carbide tips for metal-cutting tools
2.3.1. JSC 'Kirovgrad carbide material plant'
2.3.2. Other producers
3. FOREIGN TRADE OPERATIONS IN METAL-CUTTING TOOLS
3.1. Export
3.1.1. Metal-cutting tools
3.1.2. Metal-cutting ceramic tips
3.2. Import
3.2.1. Metal-cutting tools
3.2.2. Metal-cutting ceramic tips
4. CONSUMPTION OF CARBIDE METAL-CUTTING TOOLS
5. FORECAST OF PRODUCTION OF METAL-CUTTING CARBIDE TOOLS
5.1. Machine building sector in the conditions of the global financial crisis
5.2. Tasks of tool production
5.3. Forecast of production of metal-cutting tools in Russia up to 2014
APPENDIX. Contact information on the companies
LIST OF TABLES:
Table 1. Characteristics of sintered hald alloys (carbide materials)
Table 2. End-uses of tool carbide materials (for cutting)
Table 3. Dynamics of production pattern of carbide material tools in 2002-2008
Table 4. Dynamics of manufacture of metal-cutting tools by the main producers and regional pattern of the production, mln Rubles
Table 5. Side mills, manufactured by CJSC 'Holding Company Tool Plants'
Table 6. Face mills, manufactured by CJSC 'Holding Company Tool Plants'
Table 7. End mills, manufactured by CJSC 'Holding Company Tool Plants'
Table 8. Sale subdivisions of CJSC «Holding Company Tool Plants»
Table 9. Range of products of JSC «Kanashsky cutting tool plant»
Table 10. Price-list on brazed turning tools with carbide tips from alloys T15K6, T5K10, VK8 of JSC «Kirzhach tool plant»
Table 11. Mix of high-pricise monolith carbide burrs, manufactured by JSC «Serpukhov tool plant «Twintos»
Table 12. Mix of carbide broach bits, manufactured by JSC «Serpukhov tool plant «Twintos»
Table 13. Carbide metal-cutting tools, manufactured by JSC «Izhevsk tool plant» (as of 08.09.08)
Table 14. Grades and end-uses of carbide materials, manufactured by JSC 'KZTS' for cutting, drilling, turning, milling, etc.
Table 15. The main grades of carbide materials with facing, approved for production at JSC «KZTS»
Table 16. The main kinds of carbide tips and swivel ceramic inserts, manufactured by JSC «KZTS»
Table 17. Tips and cup-tip tools for working wage wheels and rails
Table 18. Dealers of JSC «KZTS»
Table 19. The main foreign consumers of tools with ceramic tips in 2007-2008, t (% of exports)
Table 20. Dynamics of exports of metal-cutting tools by kinds in 2003-2008
Table 21. The main exporters of metal-cutting tools with ceramic tip in the 1st half of 2008, t (% of exports)
Table 22. Pattern of exports of metal-cutting tools with ceramic tip in 2003-2008
Table 23. Pattern of export of swivel ceramic inserts by countries in 2003-2008, $ thousand
Table 24. Dynamics of imports of metal-cutting tools by kinds in 2003-2008
Table 25. The main brand names (firm-producers) of metal-cutting tools with ceramic tip, presented in Russia
Table 26. Pattern of imports of metal-cutting tools with ceramic tip in 2003-2008
Table 27. The main purchasers of imported metal-cutting tools with ceramic tip in the 1st half of 2008
Table 28. Regional pattern of breakage of imports of metal-cutting tools with carbide tip in 2007-2008
Table 29. Pattern of import ceramic tips and inserts by brand names in the 1st half of 2008
Table 30. The main purchasers of imported ceramic tips and inserts in the 1st half of 2008
Table 31. The main dealers of imported ceramic tips and inserts in the 1st half of 2008
LIST OF FIGURES:
Figure 1. Dynamics of production of metal-cutting carbide tools in 2003-2008
Figure 2. Regional pattern of positioning capacities on production of metal-cutting carbide tools in 2007
Figure 3. Dynamics of production of metal-cutting carbide tools by JSC «KISM» in 2003-2008
Figure 4. Dynamics of production of metal-cutting carbide tools in Belgorod region in 2003-2008
Figure 5. Dynamics of production of metal-cutting carbide tools by JSC «Kanashsky cutting tool plant» in 2003-2008
Figure 6. Dynamics of production of metal-cutting carbide tools by JSC «Kirzhach tool plant» in 2003-2008
Figure 7. Dynamics of production of metal-cutting carbide tools by JSC «Serpukhov tool plant «Twintos» in 2003-2008
Figure 8. Dynamics of production of metal-cutting carbide tools by JSC «Izhevsk tool plant» in 2003-2008
Figure 9. Dynamics of foreign trade operations in sintered carbide alloy metal-cutting tools in 2003-2008
Figure 10. Dynamics of export of metal-cutting tools in 2003-2008
Figure 11. Pattern of export of sintered (cermet) carbide alloy metal-cutting tools by kinds in the 1st half of 2008
Figure 12. Dynamics and pattern of ceramic tip exports in bulk in 2003-2008
Figure 13. Dynamics and pattern of ceramic tip exports in money terms in 2003-2008
Figure 14. The main purchasers of Russian ceramic tips in the 1st half of 2008
Figure 15. The main purchasers of Russian swivel ceramic tips in the 1st half of 2008
Figure 16. The main exporters of ceramic tips in the 1st half of 2008
Figure 17. Dynamics of imports of metal-cutting tools in 2003-2008
Figure 18. Pattern of imports of metal-cutting tools with ceramic tips in the 1st half of 2008
Figure 19. Dynamics of imports of ceramic tips and inserts in bulk in 2003-2008
Figure 20. Dynamics of imports of ceramic tips and inserts in money terms in 2003-2008
Figure 21. Dynamics of consumption of carbide metal-cutting tools in 2003-2008, mln Rubles
Figure 22. Shares of imports in consumption and exports in production of carbide tools, %
Figure 23. Mechanism of prerequisites realization
Figure 24. Forecast of production and consumption of carbide metal-cutting tools in Russia in 2009-2014
INTRODUCTION
1. GENERAL INFORMATION ABOUT METAL-CUTTING TOOLS
1.1. The main ideas of cutting process
1.2. Classification of metal-cutting tools
1.3. Tool materials
1.4. Carbide alloy tools and cutting conditions
2. PRODUCTION OF CARBIDE METAL-CUTTING TOOLS
2.1. General characteristics
2.2. Characteristics of the main producers of carbide metal-cutting tools
2.2.1. JSC «KAMAZinstrumentspetsmash» (KISM)
2.2.2. Belgorod region (LLC «SKIF-M», CJSC «Belgorod mill plant» (BZF) and CJSC «Belgorod tool plant» (BIZ))
2.2.3. JSC «Kanashsky cutting tool plant»
2.2.4. JSC «Kirzhach tool plant»
2.2.5. JSC «Serpukhov tool plant «Twintos»
2.2.6. JSC «Izhevsk tool plant»
2.3. Characteristics of the main producers of carbide tips for metal-cutting tools
2.3.1. JSC 'Kirovgrad carbide material plant'
2.3.2. Other producers
3. FOREIGN TRADE OPERATIONS IN METAL-CUTTING TOOLS
3.1. Export
3.1.1. Metal-cutting tools
3.1.2. Metal-cutting ceramic tips
3.2. Import
3.2.1. Metal-cutting tools
3.2.2. Metal-cutting ceramic tips
4. CONSUMPTION OF CARBIDE METAL-CUTTING TOOLS
5. FORECAST OF PRODUCTION OF METAL-CUTTING CARBIDE TOOLS
5.1. Machine building sector in the conditions of the global financial crisis
5.2. Tasks of tool production
5.3. Forecast of production of metal-cutting tools in Russia up to 2014
APPENDIX. Contact information on the companies
LIST OF TABLES:
Table 1. Characteristics of sintered hald alloys (carbide materials)
Table 2. End-uses of tool carbide materials (for cutting)
Table 3. Dynamics of production pattern of carbide material tools in 2002-2008
Table 4. Dynamics of manufacture of metal-cutting tools by the main producers and regional pattern of the production, mln Rubles
Table 5. Side mills, manufactured by CJSC 'Holding Company Tool Plants'
Table 6. Face mills, manufactured by CJSC 'Holding Company Tool Plants'
Table 7. End mills, manufactured by CJSC 'Holding Company Tool Plants'
Table 8. Sale subdivisions of CJSC «Holding Company Tool Plants»
Table 9. Range of products of JSC «Kanashsky cutting tool plant»
Table 10. Price-list on brazed turning tools with carbide tips from alloys T15K6, T5K10, VK8 of JSC «Kirzhach tool plant»
Table 11. Mix of high-pricise monolith carbide burrs, manufactured by JSC «Serpukhov tool plant «Twintos»
Table 12. Mix of carbide broach bits, manufactured by JSC «Serpukhov tool plant «Twintos»
Table 13. Carbide metal-cutting tools, manufactured by JSC «Izhevsk tool plant» (as of 08.09.08)
Table 14. Grades and end-uses of carbide materials, manufactured by JSC 'KZTS' for cutting, drilling, turning, milling, etc.
Table 15. The main grades of carbide materials with facing, approved for production at JSC «KZTS»
Table 16. The main kinds of carbide tips and swivel ceramic inserts, manufactured by JSC «KZTS»
Table 17. Tips and cup-tip tools for working wage wheels and rails
Table 18. Dealers of JSC «KZTS»
Table 19. The main foreign consumers of tools with ceramic tips in 2007-2008, t (% of exports)
Table 20. Dynamics of exports of metal-cutting tools by kinds in 2003-2008
Table 21. The main exporters of metal-cutting tools with ceramic tip in the 1st half of 2008, t (% of exports)
Table 22. Pattern of exports of metal-cutting tools with ceramic tip in 2003-2008
Table 23. Pattern of export of swivel ceramic inserts by countries in 2003-2008, $ thousand
Table 24. Dynamics of imports of metal-cutting tools by kinds in 2003-2008
Table 25. The main brand names (firm-producers) of metal-cutting tools with ceramic tip, presented in Russia
Table 26. Pattern of imports of metal-cutting tools with ceramic tip in 2003-2008
Table 27. The main purchasers of imported metal-cutting tools with ceramic tip in the 1st half of 2008
Table 28. Regional pattern of breakage of imports of metal-cutting tools with carbide tip in 2007-2008
Table 29. Pattern of import ceramic tips and inserts by brand names in the 1st half of 2008
Table 30. The main purchasers of imported ceramic tips and inserts in the 1st half of 2008
Table 31. The main dealers of imported ceramic tips and inserts in the 1st half of 2008
LIST OF FIGURES:
Figure 1. Dynamics of production of metal-cutting carbide tools in 2003-2008
Figure 2. Regional pattern of positioning capacities on production of metal-cutting carbide tools in 2007
Figure 3. Dynamics of production of metal-cutting carbide tools by JSC «KISM» in 2003-2008
Figure 4. Dynamics of production of metal-cutting carbide tools in Belgorod region in 2003-2008
Figure 5. Dynamics of production of metal-cutting carbide tools by JSC «Kanashsky cutting tool plant» in 2003-2008
Figure 6. Dynamics of production of metal-cutting carbide tools by JSC «Kirzhach tool plant» in 2003-2008
Figure 7. Dynamics of production of metal-cutting carbide tools by JSC «Serpukhov tool plant «Twintos» in 2003-2008
Figure 8. Dynamics of production of metal-cutting carbide tools by JSC «Izhevsk tool plant» in 2003-2008
Figure 9. Dynamics of foreign trade operations in sintered carbide alloy metal-cutting tools in 2003-2008
Figure 10. Dynamics of export of metal-cutting tools in 2003-2008
Figure 11. Pattern of export of sintered (cermet) carbide alloy metal-cutting tools by kinds in the 1st half of 2008
Figure 12. Dynamics and pattern of ceramic tip exports in bulk in 2003-2008
Figure 13. Dynamics and pattern of ceramic tip exports in money terms in 2003-2008
Figure 14. The main purchasers of Russian ceramic tips in the 1st half of 2008
Figure 15. The main purchasers of Russian swivel ceramic tips in the 1st half of 2008
Figure 16. The main exporters of ceramic tips in the 1st half of 2008
Figure 17. Dynamics of imports of metal-cutting tools in 2003-2008
Figure 18. Pattern of imports of metal-cutting tools with ceramic tips in the 1st half of 2008
Figure 19. Dynamics of imports of ceramic tips and inserts in bulk in 2003-2008
Figure 20. Dynamics of imports of ceramic tips and inserts in money terms in 2003-2008
Figure 21. Dynamics of consumption of carbide metal-cutting tools in 2003-2008, mln Rubles
Figure 22. Shares of imports in consumption and exports in production of carbide tools, %
Figure 23. Mechanism of prerequisites realization
Figure 24. Forecast of production and consumption of carbide metal-cutting tools in Russia in 2009-2014
