Global Composites Market 2011-2016: Opportunities, Market and Technologies, February 2011
Background:
The Global Composites marketplace, after an extremely challenging 2009, rebounded in several segments and multiple geographies with an annual growth rate of 10.3%. Global composite materials market (fibers, resins, etc.) is expected to reach $19 Billion in 2011.
There were dramatic changes in the composites market in 2009 & 2010. Prominent segments such as construction, automotive and marine rebounded with double-digit growth due to economic recovery in most regions. However, the wind energy segment declined in 2010 in North America, faced with low natural gas prices, difficult credit availability especially with the bankruptcy of Lehman, a stagnant market for electrical energy and a lack of required short term targets for renewable energy.
As per the study, BRIC (Brazil, Russia, India and China) nations are emerging as the largest regional composites market. Rapid infrastructure and economic growth are driving the growth of the BRIC nations’ composites market.
This new in-depth report analyzes the status and future perspective of the composites industry at the end of 2010 and provides annual industry outlook for 2011. The report also addresses outlook for the next 5 years for the 8 major sectors of the composites industry and for 4 regions, thus tracking 32 sectors of the global composites industry. Key segments include transportation, marine, wind energy, aerospace, pipe and tank, construction, E&E, and consumer goods for each of four regions, North America, Europe, APAC and ROW. Each industry's outlook is determined by its own internal dynamics, by changes in the overall economy and relative adoption rates of composites.
Lucintel is of the view that several market segments will continue to grow in 2011 as economic recovery fully takes effect and a growth of 5.9% is expected in 2011. The report provides the reader with Lucintel’s forecast for the 32 segments, supported by an analysis of the industry’s trends, key drivers and challenges.
Material suppliers and product manufacturers need to continually stay abreast, critically analyze, and act fast to capture maximum market share, growth and profitability in various applications and markets. This condensed 316-page market report provides all of the latest and critical issues concerning materials, markets and technologies related to the multi-billion dollar composite materials industry. This report is a must have report by every company working in the composites industry. In today’s global economy, you need every advantage that you can find to keep you ahead in your business. Learn about current and future trends, identify key players, and explore the directions that the industry and different segments are heading.
Features of This Report:
To make any investment, business or strategic decisions, you need timely and robust market information. This market report fulfills this core need. This is an indispensable reference guide for composite material suppliers, product manufacturers, investors, researchers, engineers, distributors and many more, who are dealing with the composites industry. Some of the features of this market report are:
This study is intended for material suppliers, parts fabricators, OEMs, investors, executives and consultants. This multi-client market study from Lucintel is used by small to multi-national Fortune 500 companies and utilized for a variety of reasons as follows.
Lucintel has been tracking the composites industry for over 10 years and has used the following sources for the completion of this valuable report.
The Global Composites marketplace, after an extremely challenging 2009, rebounded in several segments and multiple geographies with an annual growth rate of 10.3%. Global composite materials market (fibers, resins, etc.) is expected to reach $19 Billion in 2011.
There were dramatic changes in the composites market in 2009 & 2010. Prominent segments such as construction, automotive and marine rebounded with double-digit growth due to economic recovery in most regions. However, the wind energy segment declined in 2010 in North America, faced with low natural gas prices, difficult credit availability especially with the bankruptcy of Lehman, a stagnant market for electrical energy and a lack of required short term targets for renewable energy.
As per the study, BRIC (Brazil, Russia, India and China) nations are emerging as the largest regional composites market. Rapid infrastructure and economic growth are driving the growth of the BRIC nations’ composites market.
This new in-depth report analyzes the status and future perspective of the composites industry at the end of 2010 and provides annual industry outlook for 2011. The report also addresses outlook for the next 5 years for the 8 major sectors of the composites industry and for 4 regions, thus tracking 32 sectors of the global composites industry. Key segments include transportation, marine, wind energy, aerospace, pipe and tank, construction, E&E, and consumer goods for each of four regions, North America, Europe, APAC and ROW. Each industry's outlook is determined by its own internal dynamics, by changes in the overall economy and relative adoption rates of composites.
Lucintel is of the view that several market segments will continue to grow in 2011 as economic recovery fully takes effect and a growth of 5.9% is expected in 2011. The report provides the reader with Lucintel’s forecast for the 32 segments, supported by an analysis of the industry’s trends, key drivers and challenges.
Material suppliers and product manufacturers need to continually stay abreast, critically analyze, and act fast to capture maximum market share, growth and profitability in various applications and markets. This condensed 316-page market report provides all of the latest and critical issues concerning materials, markets and technologies related to the multi-billion dollar composite materials industry. This report is a must have report by every company working in the composites industry. In today’s global economy, you need every advantage that you can find to keep you ahead in your business. Learn about current and future trends, identify key players, and explore the directions that the industry and different segments are heading.
Features of This Report:
To make any investment, business or strategic decisions, you need timely and robust market information. This market report fulfills this core need. This is an indispensable reference guide for composite material suppliers, product manufacturers, investors, researchers, engineers, distributors and many more, who are dealing with the composites industry. Some of the features of this market report are:
- Market size and growth rates of the global composites industry market. Market for FRP and advanced composites.
- Market size estimates for reinforcements and resins
- Market breakdown by application and region
- Composites market by country with growth potential in Indian and Chinese composite markets.
- Market breakdown by manufacturing technologies by Manufacturing process, by market segments by various material types
- Thermoset and Thermoplastic composites market size, trends and forecast.
- Market outlook and global trends in automotive, marine, construction, aerospace a and other important market segments with needs and challenges of various market segments.
- Value chain analysis. Dollar and gross profit flow through of various nodes of the value chain (from raw material to final application)
- Material price and property comparison. iber and resin price history and forecast. material prices of more than 100 materials such as fibers, resins, fabrics, prepregs, adhesives, and metals.
- A total of over 220 figures/charts and 70 tables presented in this report to help in your business plan.
This study is intended for material suppliers, parts fabricators, OEMs, investors, executives and consultants. This multi-client market study from Lucintel is used by small to multi-national Fortune 500 companies and utilized for a variety of reasons as follows.
- Business development
- Strategic planning
- Business presentation
- Determination of market size and trend
- Competitive analysis
- Personnel training
- Budgeting
- Investment Decision
Lucintel has been tracking the composites industry for over 10 years and has used the following sources for the completion of this valuable report.
- In-depth personal and telephone interviews of more than 50 material suppliers and more than 500 molders.
- In-depth research on more than 500 companies involved in the composites market.
- Extensive search of current published literature, market and database information including news, articles published in the Composites-Week newsletter (publisher: Lucintel).
- A compilation of the experiences, judgments, and insights of Lucintel’s professionals, who have analyzed and tracked composites market over the years.
- This particular study is a culmination of 8 years of our work in data collection, research, analysis and presentation.
EXECUTIVE SUMMARY
Figure 1.1: Porter’s Five Forces model for composites industry from the perspective of composite parts fabricators.
2. ABOUT THE COMPOSITES INDUSTRY
Figure 2.1: Classification of raw materials
Figure 2.2: Schematic flow chart on global composites industry
3. COMPETITIVE ANALYSIS BETWEEN STEEL, ALUMINUM, PLASTICS AND THE COMPOSITES INDUSTRY
Figure 3.1: Global shipments - competing material 2005 - 2010
Figure 3.2: Percentage distribution of competing materials in the Global industry in 2010
Figure 3.3: US Domestic Shipments by material type from 2005 to 2010
Figure 3.4: Percentage distribution of competing materials in the U.S. industry in 2010
Figure 3.5: Amount of steel, aluminum, plastic and composites shipment on a weight basis for the U.S. industry in 2010
Figure 3.6: Composites market potential in various market segments in 2010
Figure 3.7: Global Plastic Shipment 2005-2010
Figure 3.8: The US plastics industry total sales and captive use by type of resins
Figure 3.9: Plastics industry shipment distribution by type of resins
Figure 3.10: The US Thermoplastic shipment by market in 2010
Figure 3.11: Global steel shipment 2005-2010
Figure 3.12: Steel industry breakdown by major segments in 2010
Figure 3.13: Global primary aluminum shipments
Figure 3.14: Global Aluminum Shipment by Market
4. GLOBAL REINFORCEMENT MARKET
Figure 4.1: Global composites market distribution by fiber type in 2010
Figure 4.2: Global composites shipment by fiber type in 2010
Figure 4.3: Fiber market distribution in 2010 in global composites industry on weight basis
Figure 4.4: Fiber market shipment in 2010 in global composites industry on weight basis
Figure 4.5: Fiber market distribution for global composites industry in terms of $ million shipment in 2010
Figure 4.6: Fiber shipment in terms of $ million in global composites industry in 2010
Figure 4.7: Composites applications by reinforcement form
Figure 4.8: Global fiberglass distribution by type of product form in 2010
Figure 4.9: Fiberglass distribution by type of product form in 2010
Figure 4.10: Percentage distribution of carbon fiber by precursor in terms of million lbs
Figure 4.11: Percentage distribution of carbon fiber by precursor in terms of $ million
Figure 4.12: Percentage distribution of carbon fiber by tow size in terms of million lbs
Figure 4.13: Growth trend in the carbon fiber market in terms of lbs shipments (2005-2010)
Figure 4.14: Growth trend in the carbon fiber market in terms of $ Mil shipments) (2005-2010)
5. GLOBAL RESIN MARKET
Figure 5.1: Schematic representation of uncured polyester resin
Figure 5.2: Schematic representation of cured polyester resin
Figure 5.3: Schematic representation of uncured vinyl ester resin
Figure 5.4: Schematic representation of cured vinyl ester resin
Figure 5.5: Global composites market distribution (million lbs) by thermoset and thermoplastic resin composites in 2010
Figure 5.6: Global composites market shipment (mil. lbs) by thermoset and thermoplastic resins in 2010
Figure 5.7: Global composites market distribution ($ million) by thermoset and thermoplastic resin composites in 2010
Figure 5.8: Global composites market shipment ($ milion) by thermoset and thermoplastic resins in 2010
Figure 5.9: Global composites market breakdown by resin type in 2010
Figure 5.10: Global thermoset composites market breakdown by resin type in 2010
Figure 5.11: Global resin consumption (mil lbs) by resin type in 2010
Figure 5.12: Global resin shipment ($ mil) by resin type in 2010
6. GLOBAL COMPOSITES MARKET BY MATERIAL TYPE
Figure 6.1: Advanced composites market share in global composites industry in 2010
Figure 6.2: Advanced composites market size (million lbs) in global composites industry in 2010
Figure 6.3; Advanced composites market distribution ($ shipment) in global composites industry in 2010
Figure 6.4: Advanced composites market size ($ million) in global composites industry in 2010
Figure 6.5: Raw material shipment (million lbs) in global composites industry in 2010
Figure 6.6: Global composites market breakdown (%) by raw materials used in 2010
Figure 6.7: Raw material shipment ($ million) in global composites industry in 2010
Figure 6.8: Global composites market breakdown (%, $ million) by raw materials used in 2010
Figure 6.9: Global composites market distribution by thermoset and thermoplastic resin composites in 2010
Figure 6.10: Global composites market shipment (million lbs) by thermoset and thermoplastic resins in 2010
Figure 6.11: Global composites market shipment ($ million) by thermoset and thermoplastic resins in 2010
Figure 6.12: Global thermoplastic composites market distribution by product form in 2010.
Figure 6.13: Global thermoplastic composites market shipment (million lbs) by material type in 2010
Figure 6.14: Global thermoplastic composites market distribution by $ shipment.
Figure 6.15: Global thermoplastic composites market shipment ($ million) by material type in 2010
Figure 6.16: Global composites market distribution by material form in 2010
Figure 6.17: Global composites market shipment (mil lbs) by material form in 2010
Figure 6.18: Global composites market shipment ($ mil) by material form in 2010
7. GLOBAL COMPOSITES BY MARKET SEGMENTS
Figure 7.1: Major OEMs/Molders in various market segments
Figure 7.2: Global composites distribution (%, mil lbs) in 2010 by end use application
Figure 7.3: Global composite shipments by application in 2010
Figure 7.4: Global composites distribution (%, $ million) shipment in 2010 by end use application
Figure 7.5: Global composite shipments ($ million) by applications in 2010
Figure 7.6: Composite materials shipment by region
Figure 7.7: Composites shipment (million lbs) by regions in the year 2010
Figure 7.8: Cost vs. performance criteria in various industries for composites usage
Figure 7.9: Composites distribution in the global transportation industry in 2010
Figure 7.10: Composites shipment (million lbs) in the global transportation industry in 2010
Figure 7.11: Composites distribution by region in the transportation industry in 2010
Figure 7.12: Composites shipment by region in the transportation industry in 2010
Figure 7.13: Trends (1991-2010) in total US light vehicle sales (in millions of units)
Figure 7.14: Trends (1991-2010) in segmented US light vehicle sales (in thousands of units)
Figure 7.15: Trend in composites shipment in global automobiles (2002-2010)
Figure 7.16: Chevrolet's 2008 Corvette ZR1 (source Chevrolet)
Figure 7.17: Composite cargo box of Honda’s pickup truck – (source Ridgeline)
Figure 7.18: Manufacturing process breakdown for the global transportation industry in 2010
Figure 7.19: Composites shipment (million lbs) by manufacturing process for the transportation industry in 2010
Figure 7.20: Classification of aerospace market according to aircraft type
Figure 7.21: Composites distribution in the global aerospace industry in 2010
Figure 7.22: Composites shipment (million lbs) in the global aerospace industry in 2010
Figure 7.23: Composites distribution by region in the aerospace industry in 2010
Figure 7.24: Composites consumptions by region in aerospace industry in 2010
Figure 7.25: Evolution of Composites Applications in Commercial Aircraft
Figure 7.26: Different composite material systems in the Boeing 777
Figure 7.27: Material distributions in the Airbus A340 for buy and fly cases
Figure 7.28: Trend in total $ shipment in global aerospace market
Figure 7.29: Trend in total number of aircraft deliveries by Boeing and Airbus in commercial aerospace market
Figure 7.30: Order vs. delivery of aircrafts by Boeing (2002-10)
Figure 7.31: Order vs. delivery of aircrafts by Airbus (2002-10)
Figure 7.32: Composites distribution in the global construction industry in 2010
Figure 7.33: Composites shipment (million lbs) in the global construction industry in 2010
Figure 7.34: The construction industry by region in 2010
Figure 7.35: Composites shipments in the construction industry by region in 2010
Figure 7.36: The U.S. Housing starts (1978-2010)
Figure 7.37: Trend in annual new home average prices in the US
Figure 7.38: Construction activity in EU (27) (2000-2010)
Figure 7.39: Corrosion market breakdown by type of applications
Figure 7.40: Percent comparison of petroleum tank shipments by construction material in North America
Figure 7.41: Percent comparison of septic tank shipments (in terms of number) by construction material in North America
Figure 7.42: Percentage distribution of sewage pipe market by type of material
Figure 7.43: Percentage distribution of oil and gas pipe market by type of material
Figure 7.44: Composites distribution in the global pipe & tank industry in 2010
Figure 7.45: Composites shipment (million lbs) in the global pipe & tank industry in 2010
Figure 7.46: The pipe & tank industry by region in 2010
Figure 7.47: Composites shipments in pipe & tank industry by region in 2010
Figure 7.48: Composites in the marine industry in 2010
Figure 7.49: Composites shipments in the marine industry in 2010
Figure 7.50: Composite materials distribution by region in the marine industry in 2010
Figure 7.51: Composites shipment by region in the marine industry in 2010
Figure 7.52: U.S. recreational boating domestic boat unit shipment trends (1997 to 2010)
Figure 7.53: Personal watercraft (PWC) market trend (1997-2010)
Figure 7.54: Trend in regional shipment of composites in marine industry
Figure 7.55: Composites distribution in consumer goods market in 2010
Figure 7.56: Composites shipment in consumer goods industry in 2010
Figure 7.57: Composites distribution by region in consumer goods industry
Figure 7.58: Composites shipment (million lbs) by region in consumer goods industry in 2010
Figure 7.59: Composites distribution in electrical/electronic industry
Figure 7.60: Global composites shipment in electrical/electronic industry in 2010
Figure 7.61: Composites distribution by region in electrical/electronic industry
Figure 7.62: Composites shipment by region in electrical/electronics industry in 2010
Figure 7.63: Composites distribution in wind energy
Figure 7.64: Composites shipment (million lbs) in wind energy
Figure 7.65: Composites distribution by region in wind energy industry
Figure 7.66: Trend in composites shipment in global wind energy (2002-2010)
Figure 7.67: Composites shipment in wind energy market in 2010
Figure 7.68: Increase in wind energy capacity installations
8. GLOBAL COMPOSITES MARKET BY MANUFACTURING PROCESSES
Figure 8.1: Classification of composite processing techniques.
Figure 8.2: Global composites distribution (mil lbs) by manufacturing processes in the year 2010
Figure 8.3: Global composites shipment (million lbs) by manufacturing processes in the year 2010
Figure 8.4: Global composites distribution ($ mil) by manufacturing processes in the year 2010
Figure 8.5: Global composites shipment ($ mil) by manufacturing processes in the year 2010
Figure 8.6: Hand lay-up and sprayup process distribution by applications in 2010
Figure 8.7: Hand lay-up and spray up process shipment (million lbs) by applications in 2010
Figure 8.8: SMC/BMC molding distribution by applications in 2010
Figure 8.9: SMC/BMC molding shipment (million lbs) by applications in 2010
Figure 8.10: Pultrusion process distribution by applications in 2010
Figure 8.11: Pultrusion process shipment (million lbs) by applications in 2010
Figure 8.12: Market distribution of global composites industry by open and closed molding processes in 2010
Figure 8.13: Volume shipment in open and closed molding processes in 2010
Figure 8.14: Market distribution of thermoset composites industry by open and closed molding processes in 2010
Figure 8.15: Market distribution of global composites industry by open and closed molding processes in 2010
9. TRENDS AND FORECASTS
Figure 9.1: Global composites market growth trends (2005-2010)
Figure 9.2: Comparative regional growth rates in composites industry in 2009 & 2010
Figure 9.3: Increase in wind energy capacity installations
Figure 9.4: Personal watercraft (PWC) market trend (1997-2010)
Figure 9.5: Composites market growth trends by regions (2005-2010)
Figure 9.6: Global composites market by region in 2005
Figure 9.7: Global composites market (M lbs) by region in 2010
Figure 9.8: Global composites market (US $ M) by region in 2010
Figure 9.9: Comparative growth in composites shipment (M lbs) in various regions during last year
Figure 9.10: Growth rates in various market segments of the global composites industry in 2010
Figure 9.11: Average annual growth rates in various market segments of the global composites industry in last 5 years (2005-2010)
Figure 9.12: North American composites shipment (M lbs) by year (2005-2010)
Figure 9.13: Growth rates in various market segments of North American composites industry in 2010
Figure 9.14: Average annual growth rates in various market segments of the North American composites industry in last 5 years (2005-2010)
Figure 9.15: U.S. composites shipment trends by market segments (1970-2010)
Figure 9.16: Growth rate in various market segments in European composites market
Figure 9.17: Average annual growth rates in various market segments of the European composites industry in last 5 years (2005-2010)
Figure 9.18: Growth rate in various market segments in Asian composites market
Figure 9.19: Average annual growth rates in various market segments of the Asian composites industry in last 5 years (2005-2010)
Figure 9.20: Regional leadership in composites shipment in various market segments in 2009
Figure 9.21: Regional leadership in composites shipment in various market segments in 2010
Figure 9.22: External forces shaping the composites industry
Figure 9.23: Consumer spending by year for the US. (1995 – 2010)
Figure 9.24: Quarterly consumer sentiment (US) for the period 2003-2010
Figure 9.25: Trend and forecast (1995 -2016) in the US GDP
Figure 9.26: Comparative GDP growth in major regions
Figure 9.27: Global composites market forecast (2011-2016)
Figure 9.28: Global composites market forecast by region (2011-2016)
Figure 9.29: Global composites distribution (M lbs) by region in 2016
Figure 9.30: Global composites distribution (US $ M) by region in 2016
Figure 9.31: Global composites shipment by region in 2016
Figure 9.32: Growth opportunities in various market segments (2011-2016)
Figure 9.33: Opportunities for composite products in various market segments
Figure 9.34: Growth forecast in global composites shipment by market segments in 2011
Figure 9.35: Average annual growth forecast in next 5 years (2011-2016) in global composites shipment by market segments
Figure 9.36: Global composites shipment (Mil lbs) by market segment in 2011
Figure 9.37: Global composites shipment (Mil lbs) by market segment in 2016
Figure 9.38: Global composites shipment ( US $ million) by market segment in 2016
Figure 9.39: Growth forecast in North American composites shipment by market segments in 2011
Figure 9.40: Average annual growth forecast in next 5 years (2011-2016) in North American composites industry by market segments
Figure 9.41: North American composites shipment (Mil lbs) by market segments in 2011
Figure 9.42: North American composites shipment (Mil lbs) by market segments in 2016
Figure 9.43: North American composites shipment ($ million) by market segments in 2016
Figure 9.44: Growth forecast in European composites shipment by market segments in 2011
Figure 9.45: Average annual growth forecast in next 5 years (2011-2016) in European composites shipment by market segments
Figure 9.46: European composites shipment (M lbs) by market segments in 2011
Figure 9.47: European composites shipment (M lbs) by market segments in 2016
Figure 9.48: European composites shipment ( $ Million ) by market segments in 2016
Figure 9.49: Growth forecast in Asian composites shipment by market segments in 2011
Figure 9.50: Average annual growth forecast in next 5 years (2011-2016) in Asian composites shipment by market segments
Figure 9.51: Asian composites shipment (M lbs) by market segments in 2011
Figure 9.52: Asian composites shipment (M lbs) by market segments in 2016
Figure 9.53: Asian composites shipment (US $ million) by market segments in 2016
Figure 9.54: Open and closed molding distribution in 2010
Figure 9.55: Open and closed molding distribution in 2016
Figure 9.56: Global composites shipment by open and closed molding process in 2016
Figure 9.57: Global composites distribution (%) by manufacturing processes in 2016
Figure 9.58: Global composites shipment (M lbs) by manufacturing processes in 2016
Figure 9.59: Global composites distribution (%, US $ M) by manufacturing processes in 2016
Figure 9.60: Global composites shipment (US $ M) by manufacturing processes in 2016
10. REGIONAL ANALYSIS
Figure 10.1: Global composites market by region in 2010
Figure 10.2: Global composites market shipment by region in 2010
Figure 10.3: Comparative global composites market shipment in 2010 vs. 2009
Figure 10.4: Regional breakdown of composites in various market segments in 2010
Figure 10.5: Composites market percentage distribution by leading countries
Figure 10.6: Composites shipment (million lbs) by top 10 leading countries of the world in 2010
Figure 10.7: Composites (lbs) per capita for top 10 leading countries of the world in 2010
Figure 10.8: Composites potential for top 10 leading countries of the world
Figure 10.9: Composites shipment distribution (%) in North American countries in year 2010
Figure 10.10: Composites shipment (million lbs) in North American countries in year 2010
Figure 10.11: Composites shipment distribution in western European countries in year 2010
Figure 10.12: Composites shipment in European countries in year 2010
Figure 10.13: Composites (lbs) per capita in European countries in year 2010
Figure 10.14: Composites shipment distribution (mil lbs) in Asia-Pacific countries in year 2010( %)
Figure 10.15: Composites shipment(mil Ibs in Asia-Pacific countries in year 2010 (value wise )
Figure 10.16: Composites (m lbs) per capita in Asia-Pacific countries in year 2010
Figure 10.17: Composites market distribution by applications in North America in 2010
Figure 10.18: Composites shipment (mil lbs) in various applications in North America in 2010
Figure 10.19: Composites shipment ($ mil) in various applications in North America in 2010
Figure 10.20: Composites market distribution by applications in Europe in 2010
Figure 10.21: Composites shipment (mil lbs) in various applications in Europe in 2010
Figure 10.22: Composites shipment ($ mil) in various applications in Europe in 2010
Figure 10.23: Composites market distribution by applications in Asia in 2010
Figure 10.24: Composites shipment (mil lbs) in various applications in Asia in 2010
Figure 10.25: Composites shipment ($ mil) in various applications in Asia in 2010
11. VALUE CHAIN ANALYSIS AND INDUSTRY LEADERS
Figure 11.1: Value chain for the composites industry
Figure 11.2: Global composites market breakdown (mil lbs) by raw materials used in 2010
Figure 11.3: Raw materials ($ Mil) shipment in global composites industry in 2010
Figure 11.4: Dollar ($) and gross profit flow chart through various nodes of the value chain (from raw material to the end product)
Figure 11.5: Gross profit ($ million) in raw materials (reinforcement and resins) market in 2010.
Figure 11.6: Gross profit distribution (%) by type of raw materials (fiberglass, carbon, polyester, epoxy) market in 2010
Figure 11.7: Market distribution (%) by value ($) of the end product.
Figure 11.8: Size ($ billion) of various market segments by value of composite products in 2010
Figure 11.9: Gross profit ($ million) in various market segments
Figure 11.10: Gross profit distribution (%) by type of market segments
Figure 1.1: Porter’s Five Forces model for composites industry from the perspective of composite parts fabricators.
2. ABOUT THE COMPOSITES INDUSTRY
Figure 2.1: Classification of raw materials
Figure 2.2: Schematic flow chart on global composites industry
3. COMPETITIVE ANALYSIS BETWEEN STEEL, ALUMINUM, PLASTICS AND THE COMPOSITES INDUSTRY
Figure 3.1: Global shipments - competing material 2005 - 2010
Figure 3.2: Percentage distribution of competing materials in the Global industry in 2010
Figure 3.3: US Domestic Shipments by material type from 2005 to 2010
Figure 3.4: Percentage distribution of competing materials in the U.S. industry in 2010
Figure 3.5: Amount of steel, aluminum, plastic and composites shipment on a weight basis for the U.S. industry in 2010
Figure 3.6: Composites market potential in various market segments in 2010
Figure 3.7: Global Plastic Shipment 2005-2010
Figure 3.8: The US plastics industry total sales and captive use by type of resins
Figure 3.9: Plastics industry shipment distribution by type of resins
Figure 3.10: The US Thermoplastic shipment by market in 2010
Figure 3.11: Global steel shipment 2005-2010
Figure 3.12: Steel industry breakdown by major segments in 2010
Figure 3.13: Global primary aluminum shipments
Figure 3.14: Global Aluminum Shipment by Market
4. GLOBAL REINFORCEMENT MARKET
Figure 4.1: Global composites market distribution by fiber type in 2010
Figure 4.2: Global composites shipment by fiber type in 2010
Figure 4.3: Fiber market distribution in 2010 in global composites industry on weight basis
Figure 4.4: Fiber market shipment in 2010 in global composites industry on weight basis
Figure 4.5: Fiber market distribution for global composites industry in terms of $ million shipment in 2010
Figure 4.6: Fiber shipment in terms of $ million in global composites industry in 2010
Figure 4.7: Composites applications by reinforcement form
Figure 4.8: Global fiberglass distribution by type of product form in 2010
Figure 4.9: Fiberglass distribution by type of product form in 2010
Figure 4.10: Percentage distribution of carbon fiber by precursor in terms of million lbs
Figure 4.11: Percentage distribution of carbon fiber by precursor in terms of $ million
Figure 4.12: Percentage distribution of carbon fiber by tow size in terms of million lbs
Figure 4.13: Growth trend in the carbon fiber market in terms of lbs shipments (2005-2010)
Figure 4.14: Growth trend in the carbon fiber market in terms of $ Mil shipments) (2005-2010)
5. GLOBAL RESIN MARKET
Figure 5.1: Schematic representation of uncured polyester resin
Figure 5.2: Schematic representation of cured polyester resin
Figure 5.3: Schematic representation of uncured vinyl ester resin
Figure 5.4: Schematic representation of cured vinyl ester resin
Figure 5.5: Global composites market distribution (million lbs) by thermoset and thermoplastic resin composites in 2010
Figure 5.6: Global composites market shipment (mil. lbs) by thermoset and thermoplastic resins in 2010
Figure 5.7: Global composites market distribution ($ million) by thermoset and thermoplastic resin composites in 2010
Figure 5.8: Global composites market shipment ($ milion) by thermoset and thermoplastic resins in 2010
Figure 5.9: Global composites market breakdown by resin type in 2010
Figure 5.10: Global thermoset composites market breakdown by resin type in 2010
Figure 5.11: Global resin consumption (mil lbs) by resin type in 2010
Figure 5.12: Global resin shipment ($ mil) by resin type in 2010
6. GLOBAL COMPOSITES MARKET BY MATERIAL TYPE
Figure 6.1: Advanced composites market share in global composites industry in 2010
Figure 6.2: Advanced composites market size (million lbs) in global composites industry in 2010
Figure 6.3; Advanced composites market distribution ($ shipment) in global composites industry in 2010
Figure 6.4: Advanced composites market size ($ million) in global composites industry in 2010
Figure 6.5: Raw material shipment (million lbs) in global composites industry in 2010
Figure 6.6: Global composites market breakdown (%) by raw materials used in 2010
Figure 6.7: Raw material shipment ($ million) in global composites industry in 2010
Figure 6.8: Global composites market breakdown (%, $ million) by raw materials used in 2010
Figure 6.9: Global composites market distribution by thermoset and thermoplastic resin composites in 2010
Figure 6.10: Global composites market shipment (million lbs) by thermoset and thermoplastic resins in 2010
Figure 6.11: Global composites market shipment ($ million) by thermoset and thermoplastic resins in 2010
Figure 6.12: Global thermoplastic composites market distribution by product form in 2010.
Figure 6.13: Global thermoplastic composites market shipment (million lbs) by material type in 2010
Figure 6.14: Global thermoplastic composites market distribution by $ shipment.
Figure 6.15: Global thermoplastic composites market shipment ($ million) by material type in 2010
Figure 6.16: Global composites market distribution by material form in 2010
Figure 6.17: Global composites market shipment (mil lbs) by material form in 2010
Figure 6.18: Global composites market shipment ($ mil) by material form in 2010
7. GLOBAL COMPOSITES BY MARKET SEGMENTS
Figure 7.1: Major OEMs/Molders in various market segments
Figure 7.2: Global composites distribution (%, mil lbs) in 2010 by end use application
Figure 7.3: Global composite shipments by application in 2010
Figure 7.4: Global composites distribution (%, $ million) shipment in 2010 by end use application
Figure 7.5: Global composite shipments ($ million) by applications in 2010
Figure 7.6: Composite materials shipment by region
Figure 7.7: Composites shipment (million lbs) by regions in the year 2010
Figure 7.8: Cost vs. performance criteria in various industries for composites usage
Figure 7.9: Composites distribution in the global transportation industry in 2010
Figure 7.10: Composites shipment (million lbs) in the global transportation industry in 2010
Figure 7.11: Composites distribution by region in the transportation industry in 2010
Figure 7.12: Composites shipment by region in the transportation industry in 2010
Figure 7.13: Trends (1991-2010) in total US light vehicle sales (in millions of units)
Figure 7.14: Trends (1991-2010) in segmented US light vehicle sales (in thousands of units)
Figure 7.15: Trend in composites shipment in global automobiles (2002-2010)
Figure 7.16: Chevrolet's 2008 Corvette ZR1 (source Chevrolet)
Figure 7.17: Composite cargo box of Honda’s pickup truck – (source Ridgeline)
Figure 7.18: Manufacturing process breakdown for the global transportation industry in 2010
Figure 7.19: Composites shipment (million lbs) by manufacturing process for the transportation industry in 2010
Figure 7.20: Classification of aerospace market according to aircraft type
Figure 7.21: Composites distribution in the global aerospace industry in 2010
Figure 7.22: Composites shipment (million lbs) in the global aerospace industry in 2010
Figure 7.23: Composites distribution by region in the aerospace industry in 2010
Figure 7.24: Composites consumptions by region in aerospace industry in 2010
Figure 7.25: Evolution of Composites Applications in Commercial Aircraft
Figure 7.26: Different composite material systems in the Boeing 777
Figure 7.27: Material distributions in the Airbus A340 for buy and fly cases
Figure 7.28: Trend in total $ shipment in global aerospace market
Figure 7.29: Trend in total number of aircraft deliveries by Boeing and Airbus in commercial aerospace market
Figure 7.30: Order vs. delivery of aircrafts by Boeing (2002-10)
Figure 7.31: Order vs. delivery of aircrafts by Airbus (2002-10)
Figure 7.32: Composites distribution in the global construction industry in 2010
Figure 7.33: Composites shipment (million lbs) in the global construction industry in 2010
Figure 7.34: The construction industry by region in 2010
Figure 7.35: Composites shipments in the construction industry by region in 2010
Figure 7.36: The U.S. Housing starts (1978-2010)
Figure 7.37: Trend in annual new home average prices in the US
Figure 7.38: Construction activity in EU (27) (2000-2010)
Figure 7.39: Corrosion market breakdown by type of applications
Figure 7.40: Percent comparison of petroleum tank shipments by construction material in North America
Figure 7.41: Percent comparison of septic tank shipments (in terms of number) by construction material in North America
Figure 7.42: Percentage distribution of sewage pipe market by type of material
Figure 7.43: Percentage distribution of oil and gas pipe market by type of material
Figure 7.44: Composites distribution in the global pipe & tank industry in 2010
Figure 7.45: Composites shipment (million lbs) in the global pipe & tank industry in 2010
Figure 7.46: The pipe & tank industry by region in 2010
Figure 7.47: Composites shipments in pipe & tank industry by region in 2010
Figure 7.48: Composites in the marine industry in 2010
Figure 7.49: Composites shipments in the marine industry in 2010
Figure 7.50: Composite materials distribution by region in the marine industry in 2010
Figure 7.51: Composites shipment by region in the marine industry in 2010
Figure 7.52: U.S. recreational boating domestic boat unit shipment trends (1997 to 2010)
Figure 7.53: Personal watercraft (PWC) market trend (1997-2010)
Figure 7.54: Trend in regional shipment of composites in marine industry
Figure 7.55: Composites distribution in consumer goods market in 2010
Figure 7.56: Composites shipment in consumer goods industry in 2010
Figure 7.57: Composites distribution by region in consumer goods industry
Figure 7.58: Composites shipment (million lbs) by region in consumer goods industry in 2010
Figure 7.59: Composites distribution in electrical/electronic industry
Figure 7.60: Global composites shipment in electrical/electronic industry in 2010
Figure 7.61: Composites distribution by region in electrical/electronic industry
Figure 7.62: Composites shipment by region in electrical/electronics industry in 2010
Figure 7.63: Composites distribution in wind energy
Figure 7.64: Composites shipment (million lbs) in wind energy
Figure 7.65: Composites distribution by region in wind energy industry
Figure 7.66: Trend in composites shipment in global wind energy (2002-2010)
Figure 7.67: Composites shipment in wind energy market in 2010
Figure 7.68: Increase in wind energy capacity installations
8. GLOBAL COMPOSITES MARKET BY MANUFACTURING PROCESSES
Figure 8.1: Classification of composite processing techniques.
Figure 8.2: Global composites distribution (mil lbs) by manufacturing processes in the year 2010
Figure 8.3: Global composites shipment (million lbs) by manufacturing processes in the year 2010
Figure 8.4: Global composites distribution ($ mil) by manufacturing processes in the year 2010
Figure 8.5: Global composites shipment ($ mil) by manufacturing processes in the year 2010
Figure 8.6: Hand lay-up and sprayup process distribution by applications in 2010
Figure 8.7: Hand lay-up and spray up process shipment (million lbs) by applications in 2010
Figure 8.8: SMC/BMC molding distribution by applications in 2010
Figure 8.9: SMC/BMC molding shipment (million lbs) by applications in 2010
Figure 8.10: Pultrusion process distribution by applications in 2010
Figure 8.11: Pultrusion process shipment (million lbs) by applications in 2010
Figure 8.12: Market distribution of global composites industry by open and closed molding processes in 2010
Figure 8.13: Volume shipment in open and closed molding processes in 2010
Figure 8.14: Market distribution of thermoset composites industry by open and closed molding processes in 2010
Figure 8.15: Market distribution of global composites industry by open and closed molding processes in 2010
9. TRENDS AND FORECASTS
Figure 9.1: Global composites market growth trends (2005-2010)
Figure 9.2: Comparative regional growth rates in composites industry in 2009 & 2010
Figure 9.3: Increase in wind energy capacity installations
Figure 9.4: Personal watercraft (PWC) market trend (1997-2010)
Figure 9.5: Composites market growth trends by regions (2005-2010)
Figure 9.6: Global composites market by region in 2005
Figure 9.7: Global composites market (M lbs) by region in 2010
Figure 9.8: Global composites market (US $ M) by region in 2010
Figure 9.9: Comparative growth in composites shipment (M lbs) in various regions during last year
Figure 9.10: Growth rates in various market segments of the global composites industry in 2010
Figure 9.11: Average annual growth rates in various market segments of the global composites industry in last 5 years (2005-2010)
Figure 9.12: North American composites shipment (M lbs) by year (2005-2010)
Figure 9.13: Growth rates in various market segments of North American composites industry in 2010
Figure 9.14: Average annual growth rates in various market segments of the North American composites industry in last 5 years (2005-2010)
Figure 9.15: U.S. composites shipment trends by market segments (1970-2010)
Figure 9.16: Growth rate in various market segments in European composites market
Figure 9.17: Average annual growth rates in various market segments of the European composites industry in last 5 years (2005-2010)
Figure 9.18: Growth rate in various market segments in Asian composites market
Figure 9.19: Average annual growth rates in various market segments of the Asian composites industry in last 5 years (2005-2010)
Figure 9.20: Regional leadership in composites shipment in various market segments in 2009
Figure 9.21: Regional leadership in composites shipment in various market segments in 2010
Figure 9.22: External forces shaping the composites industry
Figure 9.23: Consumer spending by year for the US. (1995 – 2010)
Figure 9.24: Quarterly consumer sentiment (US) for the period 2003-2010
Figure 9.25: Trend and forecast (1995 -2016) in the US GDP
Figure 9.26: Comparative GDP growth in major regions
Figure 9.27: Global composites market forecast (2011-2016)
Figure 9.28: Global composites market forecast by region (2011-2016)
Figure 9.29: Global composites distribution (M lbs) by region in 2016
Figure 9.30: Global composites distribution (US $ M) by region in 2016
Figure 9.31: Global composites shipment by region in 2016
Figure 9.32: Growth opportunities in various market segments (2011-2016)
Figure 9.33: Opportunities for composite products in various market segments
Figure 9.34: Growth forecast in global composites shipment by market segments in 2011
Figure 9.35: Average annual growth forecast in next 5 years (2011-2016) in global composites shipment by market segments
Figure 9.36: Global composites shipment (Mil lbs) by market segment in 2011
Figure 9.37: Global composites shipment (Mil lbs) by market segment in 2016
Figure 9.38: Global composites shipment ( US $ million) by market segment in 2016
Figure 9.39: Growth forecast in North American composites shipment by market segments in 2011
Figure 9.40: Average annual growth forecast in next 5 years (2011-2016) in North American composites industry by market segments
Figure 9.41: North American composites shipment (Mil lbs) by market segments in 2011
Figure 9.42: North American composites shipment (Mil lbs) by market segments in 2016
Figure 9.43: North American composites shipment ($ million) by market segments in 2016
Figure 9.44: Growth forecast in European composites shipment by market segments in 2011
Figure 9.45: Average annual growth forecast in next 5 years (2011-2016) in European composites shipment by market segments
Figure 9.46: European composites shipment (M lbs) by market segments in 2011
Figure 9.47: European composites shipment (M lbs) by market segments in 2016
Figure 9.48: European composites shipment ( $ Million ) by market segments in 2016
Figure 9.49: Growth forecast in Asian composites shipment by market segments in 2011
Figure 9.50: Average annual growth forecast in next 5 years (2011-2016) in Asian composites shipment by market segments
Figure 9.51: Asian composites shipment (M lbs) by market segments in 2011
Figure 9.52: Asian composites shipment (M lbs) by market segments in 2016
Figure 9.53: Asian composites shipment (US $ million) by market segments in 2016
Figure 9.54: Open and closed molding distribution in 2010
Figure 9.55: Open and closed molding distribution in 2016
Figure 9.56: Global composites shipment by open and closed molding process in 2016
Figure 9.57: Global composites distribution (%) by manufacturing processes in 2016
Figure 9.58: Global composites shipment (M lbs) by manufacturing processes in 2016
Figure 9.59: Global composites distribution (%, US $ M) by manufacturing processes in 2016
Figure 9.60: Global composites shipment (US $ M) by manufacturing processes in 2016
10. REGIONAL ANALYSIS
Figure 10.1: Global composites market by region in 2010
Figure 10.2: Global composites market shipment by region in 2010
Figure 10.3: Comparative global composites market shipment in 2010 vs. 2009
Figure 10.4: Regional breakdown of composites in various market segments in 2010
Figure 10.5: Composites market percentage distribution by leading countries
Figure 10.6: Composites shipment (million lbs) by top 10 leading countries of the world in 2010
Figure 10.7: Composites (lbs) per capita for top 10 leading countries of the world in 2010
Figure 10.8: Composites potential for top 10 leading countries of the world
Figure 10.9: Composites shipment distribution (%) in North American countries in year 2010
Figure 10.10: Composites shipment (million lbs) in North American countries in year 2010
Figure 10.11: Composites shipment distribution in western European countries in year 2010
Figure 10.12: Composites shipment in European countries in year 2010
Figure 10.13: Composites (lbs) per capita in European countries in year 2010
Figure 10.14: Composites shipment distribution (mil lbs) in Asia-Pacific countries in year 2010( %)
Figure 10.15: Composites shipment(mil Ibs in Asia-Pacific countries in year 2010 (value wise )
Figure 10.16: Composites (m lbs) per capita in Asia-Pacific countries in year 2010
Figure 10.17: Composites market distribution by applications in North America in 2010
Figure 10.18: Composites shipment (mil lbs) in various applications in North America in 2010
Figure 10.19: Composites shipment ($ mil) in various applications in North America in 2010
Figure 10.20: Composites market distribution by applications in Europe in 2010
Figure 10.21: Composites shipment (mil lbs) in various applications in Europe in 2010
Figure 10.22: Composites shipment ($ mil) in various applications in Europe in 2010
Figure 10.23: Composites market distribution by applications in Asia in 2010
Figure 10.24: Composites shipment (mil lbs) in various applications in Asia in 2010
Figure 10.25: Composites shipment ($ mil) in various applications in Asia in 2010
11. VALUE CHAIN ANALYSIS AND INDUSTRY LEADERS
Figure 11.1: Value chain for the composites industry
Figure 11.2: Global composites market breakdown (mil lbs) by raw materials used in 2010
Figure 11.3: Raw materials ($ Mil) shipment in global composites industry in 2010
Figure 11.4: Dollar ($) and gross profit flow chart through various nodes of the value chain (from raw material to the end product)
Figure 11.5: Gross profit ($ million) in raw materials (reinforcement and resins) market in 2010.
Figure 11.6: Gross profit distribution (%) by type of raw materials (fiberglass, carbon, polyester, epoxy) market in 2010
Figure 11.7: Market distribution (%) by value ($) of the end product.
Figure 11.8: Size ($ billion) of various market segments by value of composite products in 2010
Figure 11.9: Gross profit ($ million) in various market segments
Figure 11.10: Gross profit distribution (%) by type of market segments
LIST OF TABLES
(A total of 70 tables are presented in this report as shown below.)
Table 1.1: Global Composites market parameters and attributes – materials perspective
Table 1.2: Global Composites market parameters and attributes – end product market perspective
Table 3.1: Composites penetration in various market segments
Table 3.2: Plastic Materials Shipment for US Domestic market
Table 6.1: Global composites shipment by raw material type in 2010
Table 7.1: Impact properties of some selected materials
Table 7.2: Application of composite materials in the automotive industry
Table 7.3: Segmented US Light Vehicle Sales (in thousands of units)
Table 7.4: Applications of composite materials in aerospace structures
Table 7.5: Evolution of Composite Material Applications at Airbus
Table 7.6 :Aerospace structures made of composites
Table 7.7: Selected materials and processes for the Airbus A380
Table 7.8: Composite components in aircraft applications
Table 7.9: Structural Fabric Repair System
Table 8.1: Ranking of manufacturing processes based on annual shipment
Table 9.1: Market trends (2005-2010) in global composites shipment
Table 9.2: Average growth rates for 1, 10, 20, 30 and 40 years in the US composites industry
Table 9.3: Average annual growth rates in various regions of the global composites industry
Table 9.4: Market size and annual growth rates in various segments of global composites industry
Table 9.5: Market size and annual growth rates during last 5 years (2005-2010) in various market segments of global composites industry
Table 9.6: Market trends (2005-2010) in North American composites shipment
Table 9.7: Average annual growth rates during last 10, 20, 30, and 40 years (1970-2010) in various market segments of the US composites industry
Table 9.8: GDP and unemployment rate for leading countries. (Source: The Economist)
Table 9.9: Interest and exchange rates for leading countries. (Source: The Economist)
Table 9.10: Forecast for select markets
Table 9.11: Average annual growth forecasts in various regions of the global composites industry (2011-2016)
Table 9.12: Market size and annual growth forecasts during the next 5 years (2011-2016) in various market segments of the global composites industry
Table 10.1: Average annual growth rates in various regions of the global composites industry
Table 10.2: Ranking of top 10 countries of world in terms of composites shipment
Table 10.3: Ranking of 5 leading countries in Europe in terms of composites shipment
Table 10.4: Ranking of 5 leading countries in Asia-Pacific in terms of composites shipment
Table 10.5: Ranking of 5 leading applications in North American composites industry
Table 10.6: Ranking of 6 leading market segments in the European composites industry
Table 10.7: Ranking of 5 leading applications in Asia-Pacific region
Table 11.1: Financial results of industry leaders in the material supplier category
Table 11.2: Financial results of industry leaders in various market segments
Table 12.1: Impact properties of some selected materials.
Table 12.2; Maximum continuous use temperatures for various thermosets and thermoplastics.
(A total of 70 tables are presented in this report as shown below.)
Table 1.1: Global Composites market parameters and attributes – materials perspective
Table 1.2: Global Composites market parameters and attributes – end product market perspective
Table 3.1: Composites penetration in various market segments
Table 3.2: Plastic Materials Shipment for US Domestic market
Table 6.1: Global composites shipment by raw material type in 2010
Table 7.1: Impact properties of some selected materials
Table 7.2: Application of composite materials in the automotive industry
Table 7.3: Segmented US Light Vehicle Sales (in thousands of units)
Table 7.4: Applications of composite materials in aerospace structures
Table 7.5: Evolution of Composite Material Applications at Airbus
Table 7.6 :Aerospace structures made of composites
Table 7.7: Selected materials and processes for the Airbus A380
Table 7.8: Composite components in aircraft applications
Table 7.9: Structural Fabric Repair System
Table 8.1: Ranking of manufacturing processes based on annual shipment
Table 9.1: Market trends (2005-2010) in global composites shipment
Table 9.2: Average growth rates for 1, 10, 20, 30 and 40 years in the US composites industry
Table 9.3: Average annual growth rates in various regions of the global composites industry
Table 9.4: Market size and annual growth rates in various segments of global composites industry
Table 9.5: Market size and annual growth rates during last 5 years (2005-2010) in various market segments of global composites industry
Table 9.6: Market trends (2005-2010) in North American composites shipment
Table 9.7: Average annual growth rates during last 10, 20, 30, and 40 years (1970-2010) in various market segments of the US composites industry
Table 9.8: GDP and unemployment rate for leading countries. (Source: The Economist)
Table 9.9: Interest and exchange rates for leading countries. (Source: The Economist)
Table 9.10: Forecast for select markets
Table 9.11: Average annual growth forecasts in various regions of the global composites industry (2011-2016)
Table 9.12: Market size and annual growth forecasts during the next 5 years (2011-2016) in various market segments of the global composites industry
Table 10.1: Average annual growth rates in various regions of the global composites industry
Table 10.2: Ranking of top 10 countries of world in terms of composites shipment
Table 10.3: Ranking of 5 leading countries in Europe in terms of composites shipment
Table 10.4: Ranking of 5 leading countries in Asia-Pacific in terms of composites shipment
Table 10.5: Ranking of 5 leading applications in North American composites industry
Table 10.6: Ranking of 6 leading market segments in the European composites industry
Table 10.7: Ranking of 5 leading applications in Asia-Pacific region
Table 11.1: Financial results of industry leaders in the material supplier category
Table 11.2: Financial results of industry leaders in various market segments
Table 12.1: Impact properties of some selected materials.
Table 12.2; Maximum continuous use temperatures for various thermosets and thermoplastics.
